Used Metal Processing Machine for sale (71,050)

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Fpjdpfx Adsif Sg So Nog Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Machine is in fully working condition. Fpedehm S Dgopfx Ad Neg

Condition: good (used), functionality: fully functional, We are looking for company liquidations of sheet metal processing machines Fjdpfevzl H Tsx Ad Nspg

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1, overall weight: 4 kg, Downspout Pipe Production Line Strip thickness: 0.6 - 0.7 mm Material quality: Steel and Pre-painted Product diameter: Ø 100 mm ( 75, 87, 111,120 mm optional dimention) Production Line included: Fsdpfxowvhnhs Ad Nopg Double Head Decoiler: 4+4 tons, Roll Forming Machine casstte type ( with extra cassettes ) Hydraulic Cutting Unit.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fpsdpfjw A Iiljx Ad Neg Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Fpedpowz Ukysfx Ad Neg

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Fpsdsv Ng E Tepfx Ad Njg Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 40,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: exchange table, fully protected exchange table, ultra-high power, dual platform Laser power: 12KW15KW, 20KW, 30KW, 40KW, 3KW.6KW Standard hardware: scrap car, fire brick, fully automatic butter filling, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, rear camera, internal camera, monitoring display, radiation-proof glass, top cover beam light curtain, partition dust removal Optional hardware: light-blocking rubber strip, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, top cover fan Optional functions: FDA configuration, CSA configuration, TUV configuration, conventional CE configuration Fpjdpfxjwxam Is Ad Nsg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm Fjdjxdmgvepfx Ad Nepg CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Fjdovmwn Hjpfx Ad Nopg Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) Fjdoyq Rkyopfx Ad Nepg The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, sheet thickness (max.): 120 mm, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Station 1: Sanding belt Station 2: Rotary brush Station 3: Rotary brush Min. sheet thickness: 0.5 mm Max. sheet thickness: 120 mm Working width: 950 mm Working height: 0.5-120 mm Fjdpfey Hhp Tsx Ad Nspg MACHINE DETAILS Power: 39 kW Control: CNC Number of stations: 3 Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Net weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Model - TAF-BG Filleting Machine. Serial number – 8047. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Fpodpjy Rimzofx Ad Nsg Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: ready for operation (used), Vemag vacuum filler, Model Robot 500 With portion control Fpsdpfxey N Skaj Ad Neg Twin stainless steel augers Will continuous straight fill With PC 878 controls

Condition: ready for operation (used), Year of construction: 2017, Bizerba A550 Slicing machine Suitable for cooked meat, bacon, cheese Capable of stacking, shingling into groups Wire mesh conveyor belt Year 12-2016 Fpsdsy Ndukopfx Ad Neg

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Fjdpfxjudb R Ij Ad Nepg Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: used, Year of construction: 2008, functionality: limited functionality, Full evisceration line from MEYN. Maestro with 28 units. Fedpfx Asy Nndpsd Nopg All the rest 20 units. Can be sold with units revised with brand new parts as well as shaft.

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed belt width 900 mm with extra outfeed belt Fpsdpfxoy N Tx So Ad Njg with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, Discover the GEA-CFS SuperFry 5000/650 Fryer, an industrial fryer specifically engineered for continuous large-scale frying operations. Its stainless steel construction ensures robustness and durability, making it ideal for demanding food production environments. Thanks to its automated conveyor, it efficiently handles high volumes of food, ensuring uniform and precise cooking of products. Additionally, the SuperFry is equipped with advanced control and safety systems. It enables precise adjustment of conveyor speed, ranging from 1.2 to 15 m/min, and frying time, from 20 to 250 seconds. As a result, it offers exceptional flexibility to meet the specific requirements of any production process. Optimized sediment management and oil circulation contribute to superior finished product quality. Regarding technical specifications, the machine provides an output of 313 kW and operates at 3 x 400V, 50Hz. The minimum oil volume is approximately 1,009 liters with an oil level 2 cm above the conveyor. Weighing 4,000 kg, it is also equipped with electric lifters, a circulation pump, and a sediment removal system. Finally, a required amperage of 462A highlights its energy performance. The SuperFry 5000/650 is thus the ideal solution for companies seeking to optimize their frying processes while ensuring impeccable food quality and safety. Technical Specifications: Manufacturer: GEA-CFS Fpedpou Hhvfofx Ad Nog Model: SuperFry 5000/650 All stainless steel Capacity: 3 x 400V, 50Hz Power: 313 kW Adjustable speed Minimum oil volume at 2 cm above conveyor: approx. 1,009 L Weight: 4,000 kg Amperage: 462A Frying time: 20-250 sec Conveyor speed: 1.2-15 m/min Equipped with electric lifters, circulation pump, sediment removal

Condition: used, Year of construction: 2020, KOLBE Foodtec K330 Bandsaw – Year of Manufacture 2020 Offering a professional floor standing bandsaw, KOLBE Foodtec model K330, ideal for butcher shops, meat processing, or gastronomy applications. The machine is in good used condition and fully functional. Fodpfx Adey Rkr Ee Njpg Technical specifications: Model: K330 Year of manufacture: 2020 Power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Weight: approx. 165–175 kg Saw blade: 2490 × 16 Please contact me if interested.

Condition: ready for operation (used), MADO bandsaw. MKB 648D. 380V. Fjdpfx Aey N Ui Sed Nopg

Condition: ready for operation (used), functionality: fully functional, The Gaser PRACTIC-240 batter & breading machine is an industrial unit designed for the automated application of batter and breadcrumbs to food products. It is used in production environments to ensure uniform coating, especially on meat, fish, or processed products within processing lines. This allows for standardized quality while maintaining continuous production. Thanks to its combined batter and breading system, the PRACTIC-240 guarantees consistent coverage of each product. The machine features a double feeding system with separate hoppers for liquid and breadcrumbs, enabling uninterrupted continuous operation. As a result, it boosts productivity and minimizes material waste. Additionally, the adjustable speed allows production rates to be tailored to specific requirements. Moreover, this machine easily integrates into a complete food processing line, particularly ahead of fryers or ovens. Its usable width of 240 mm enables handling of various product formats with consistent results. Furthermore, its stainless steel construction and quick-release design make cleaning simple and ensure a high level of hygiene. Fedpfx Adsy Nl Dte Njpg In summary, the Gaser PRACTIC-240 batter & breading machine is an effective solution for automating coating processes while keeping costs under control. As a refurbished unit, it provides access to stable, reliable, and profitable production. Technical specifications: Brand: Gaser Model: PRACTIC-240 Type: Automatic batter & breading applicator Usable width: 240 mm Conveyor speed: 9 to 15 m/min Output: 3,000 to 4,000 pcs/hour Power: 0.62 kW Power supply: 230 V – single-phase – 50/60 Hz Weight: 150 kg Dimensions (L × W × H): 1,990 × 680 × 1,640 mm Batter tank: 15 L Breadcrumb hopper: 30 kg Discharge height: 1,010 mm Construction: stainless steel Operation: continuous batter and breading ❓ What to check before investing in the PRACTIC-240 What is the actual achievable output? The PRACTIC-240 can process up to 4,000 pieces per hour, depending on the product and line configuration. Is the coating truly uniform? Yes, the combined batter and breadcrumb system ensures consistent and even coverage. Can it run continuously without stoppage? Yes, thanks to its twin independent hoppers, it allows for continuous operation without production interruptions. Where does it integrate within a processing line? It is typically placed ahead of a fryer or oven in a breaded products line. 6XHF76RN

Condition: used, Year of construction: 2016, functionality: fully functional, The MAJA SAH 170L ice machine is an essential piece of equipment for food industry professionals looking to produce flake ice efficiently. Thanks to its robust design and optimized output, it guarantees continuous ice production, ensuring product freshness throughout the process. In fact, this machine can produce up to 170 kg of ice in 24 hours, making it ideal for high-demand environments. What's more, the MAJA SAH 170L is equipped with a wheeled storage bin, making it easy to transport and store ice. In addition, the polyurethane foam insulation system keeps the ice at an optimum temperature, while preventing excessive melting. What's more, maintenance is simplified thanks to easy-to-clean surfaces and convenient draining via an outlet tap. With its reliable performance and functional design, this machine is an asset for companies looking to improve their ice management. Fpedpsu Iu Svefx Ad Nsg In short, the MAJA SAH 170L ice machine combines efficiency, mobility and ease of maintenance, offering a complete solution for ice production needs. Technical specifications: Manufacturer : MAJA-Maschinenfabrik Type: SAH 170 L Year of construction: 2016 Refrigerant: R 404 A. Refrigerant charge : 1.0 Kg. Power required : 0.99 kW. Amperage: 6.73 A. Voltage : 1 Ac / 230 V / 50 Hz / PE Ice production (approx.) : 170 kg / 24 h (7 kg / 1 h). GWP : 3922 CO2e : 3922 t Width: 705 mm Depth: 700 mm Height : 1380 mm Silo content: 50 Kg. Capacities given with R404A fluid, for water inlet temperature +16°C, ambient temperature +20°C. With heat exchanger for optimized efficiency. The wheeled storage bin makes ice handling a breeze: - For transporting and storing approx. 50 kg of MAJA flake ice. - Sturdy polypropylene inner and outer surfaces. - Optimum insulation with polyurethane foam. - Easy-to-clean surfaces. - Double bottom to separate ice from melt water. - Easy emptying via drain tap at bottom. - Mobile thanks to stainless steel supports on castors with brakes.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm Fpedpfxob A Nmde Ad Njg -Motor mounted on guides -Quantity: 1 motor available with left-hand thread -Price: per piece -Weight: 20 kg/piece

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Fedpfx Ajy Nkdfjd Njpg Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included