Used Microstep Mg 16500 for sale (910)

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Redpfjwmqwyjx Ad Ast

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 Redswhk E Hopfx Ad Aot AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: used, Year of construction: 2019, CNC gantry plasma cutting machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, incl. 8-position tool changer 1 x preparation for retrofitting a rotator (for bevel cutting) 1 x nesting software on the CNC control Rsdpfx Adjyay H Ae Aot ä21426 Availability: May 2026

Condition: used, MicroStep MG 18001.30 PraG Dimensions: 18,000 x 3,000 mm 1x plasma rotator: renewed in 2022 1x straight oxy-fuel torch Hypertherm HPR 260XD plasma source Excluding filter unit Rodpfeytga Nex Ad Aet

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Redpfx Aox D Hz Hed Aot Cutting

Year of construction: 2020, condition: ready for operation (used), overall weight: 4,920 kg, total width: 1,460 mm, total height: 1,520 mm, product length (max.): 2,925 mm, Roll bending machine manufactured in 2020. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details. • working width: 1,550 mm • Bending / pre-bending capacity: 20.0 / 16.0 mm • Top roll diameter: 270 mm • Bottom roll diameter: 260 mm Redoy Ifrzspfx Ad Ast • Side roll diameter: 220 mm • Drive power (central hydraulics): 7.5 kW (15 A) • Control: CNC TouchCommand EVO • Electrical supply: 400 V, 50 Hz, 3Ph + PE Additional equipment • Crowning of rolls • Inductive hardened rolls • Calibration device • Cone bending device • Hydraulic brake for top roll • Additional roll (1,550 x 230 mm)

Condition: used, Year of construction: 2019, This MicroStep Master Cut CNC plasma cutting machine, type RS, is being auctioned online in our industrial auction/machinery auction for the inventory of ZINK NFZ GmbH & Co. KG. Rsdpfx Adoy Hqmze Aot You can find this and many other items on our platform.

Condition: used, functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 190 mm, side roll diameter: 170 mm, roller length: 2,600 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, overall weight: 2,800 kg, total length: 4,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Bending capacity -Plate width : 2500 mm -Rolling plate thickness: 6 mm -Prebend thickness: 4 mm Rolls dimensions: -Useful length 2600 mm -top roll D 190 mm -side rolls D 170 mm Configuration of the machine Rodpfx Adsy H Aytj Ast Rolls hardened induction treatment, high strength surface of the 3 rolls • Power driven total on the 3 rolls, hydraulic motor each roll • Conical bending hydraulic attachment • Re-rolling system welded shells rounding. • Opening hydraulic front drop-end • Electric 3 phase 380/50 Vac, power 5,5 Hp. • Speed infinitely variable slow-fast stepless • Digital position readouts of the bending rolls.

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. • Working dimensions: 1500 x 3000 mm • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage Redpfxjycvq Ao Ad Ajt • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, year of manufacture 2006. It was fully overhauled in 2024. New control cabinet, new blade sets. Includes Wagner pre-shredder type WS 15, year 2007, 15 kW, feeder belt, extraction system and magnetic vibrating table from 2021. Rjdpfjy D Ug Tox Ad Aot Throughput: approx. 150–180 kg/hour, depending on material. Location: Switzerland, 8260 Stein am Rhein. Asking price: negotiable, EUR 89,000 If you have any questions or require further information, feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm Redpfxjy Ecr Hs Ad Aot - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter unit for outdoor installation 1 x nesting software on the machine control Availability: immediately Rjdpjytqmmsfx Ad Aet

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Rsdpfx Aexnmbnod Ajt Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filter unit TEKA Ref. ä16426

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control system Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source Rsdpou U Hm Aefx Ad Ajt 2 autogenous torches for propane Oscillating conveyor table by Beuting Donaldson DFPRO12 filter unit for outdoor installation

Condition: used, Year of construction: 2012, CNC Laser Cutting System Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Max. sheet thickness steel: 15 mm Max. sheet thickness stainless steel: 8 mm Max. sheet thickness aluminium: 8 mm Operating temperature: +10 to +30 °C and max. 90% relative humidity (at 20°C) Extraction duct (left & right): outlet left, ø 250 mm Rodpfx Asx Eh Drod Ajt Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter unit: TEKA 4H 5.5 kW Overall dimensions: approx. 10,400 x 3,610 mm

Condition: good (used), Year of construction: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of Manufacture: 2011 CNC Control: iMSNC with integrated network card Rsdpjudn Rzsfx Ad Aet Working Area: 2,000 x 9,000 mm Exhaust table 1 Oxy-fuel torch Cutting thickness up to 150 mm 1 Plasma marking unit Kjellberg Laser pointer Technical details: 1x Oxy-fuel torch (fully automatic) 1x Plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network interface LCD operator panels on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system "AsperWin-Basic" for direct programming at the machine control Macro library module "AsperWin Select" NC simulator module "AsperWin NC-Sim" "Plasma marking" module (for scribing) via plasma source "THC" / Automatic height control via arc voltage USB2.0 connectivity for storage media Remote diagnostics module MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Power cables Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 set capacitive height control IHT / for oxy-fuel 1 set electric ignition unit RHÖNA-Acetylene Double-sided cable safety (collision protection) for gantry bridge via emergency stop Kjellberg® Plasma marker unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into CNC control Module for automatic control of marking device

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Rodpfx Aey Dcd Hed Aet

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 Redpfoy Auxmjx Ad Ast CNC control Working area: 1,500 x 3,000 mm 1 x plasma with Kjellberg HiFocus 161i power source Prepared for retrofitting of an oxy-fuel torch Filtration unit Kemper System 8000 with pre-separator Nesting software Asper Basic on the CNC control ä16426

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Exhaust table: 2 x 12 m Donaldson Torit DCE filtration unit Rodpfxeuv Hkgo Ad Aet 16426ä

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Rjdpfxjyzy S Ae Ad Aet Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Rsdpeiwa Hcjfx Ad Ast Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. Rjdpfx Adjwinpxs Aet The machine can be inspected under power in Vilnius.

Condition: used, mileage: 5,000 km, power: 82 kW (111.49 HP), color: black, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, = Additional Options and Equipment = - Passenger airbag - Power window controls – left - Power window controls – right - Driver airbag Redpfx Aeyy H R Njd Aet = Notes = - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. D. Neidhart and J. Ebert will be happy to assist you. Current mileage: 5,785 km Additional features: 6 speakers, deactivatable passenger airbag, driver/passenger airbags, traction control (ASR), audio navigation system, electrically folding exterior mirrors, electrically adjustable exterior mirrors, heated exterior mirrors, exterior mirrors in vehicle color, Bluetooth interface, brake assist (EBA), "coming home" light function, roof rails, rear parking sensors, driver assistance system: roll-over protection system, rear power windows, Bluetooth hands-free system, rear window wiper, infotainment system (10.1-inch touchscreen), Isofix child seat attachment points on rear seats (including i-Size child seats), 360° camera system, 5-door body, front head airbag system, front head-shoulder airbag, 3 manually adjustable rear headrests, alloy wheels, rear center armrest, engine 1.0 L 82 kW T-GDI CAT, emergency call system (eCall), panoramic sunroof, electronic parking brake (EPB), digital radio reception (DAB), wheelbase 2580 mm, tire repair kit, split-folding rear seat backrest (60:40), low emissions according to Euro 6d emission standard, front side airbags, electrically adjustable driver’s seat, height-adjustable driver’s seat, height-adjustable passenger seat, 4-way adjustable passenger seat, upholstery: synthetic leather, heated front seats, smartphone interface (Apple CarPlay & Android Auto), start-stop button, 12V power socket, solid paint Dover White Rain sensor, heated front seats 2nd owner (German vehicle), we are happy to provide you with an offer for trading in your used vehicle. Should you wish to lease or finance your vehicle, we can also provide you with a tailored offer. Subject to errors and prior sale. - Alloy wheels, electronic immobilizer, ESP, navigation system, service history, warranty, rain sensor, panoramic roof, electric side mirrors, Bluetooth, onboard computer, electrically adjustable seats, hands-free system, multifunction steering wheel, Isofix, light sensor, fog lights, non-smoker vehicle, start/stop system, roof rails, emergency brake assist, keyless central locking (keyless), blind spot monitor, alarm system, armrest, hill start assist, leather steering wheel, tire pressure monitoring, paddle shifters, sound system, touchscreen, USB, all-weather tires, winter package, Apple CarPlay, Android Auto, fully digital instrument cluster, electrically folding side mirrors = Additional Information = Engine displacement: 999 cc Number of owners: 2 Please contact Tobias Ebert for further information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty Rodpeyzim Ajfx Ad Ajt -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Rsdpjyxc Twefx Ad Aot