Used Mkr Centrifuge for sale (1,036)

Year of construction: 2001, condition: used, filling capacity 40 l Suction height 3000 mm wall strength VA 3,0 mm total power requirement 6/12 kW/A weight of the machine ca. 0,5 t dimensions 1,63 x 0,68 x 1,24 m Used centrifuge for coolants and washing media. - VA welded construction - Power connection V/A 400/16 Ledpfxoz D Ir Re Abzsag

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Lsdpforrwclox Abzjag

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Ljdpsxukkysfx Abzjag Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Laedpfx Aoxhffrobzeg Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, Year of construction: 2008, operating hours: 27,234 h, functionality: unexamined, overall weight: 1,200 kg, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 2,650 rpm, power: 11 kW (14.96 HP), input frequency: 50 Hz, input current: 45 A, year of last overhaul: 2019, We are offering this used Rösler Z 1200 ASS-2-turbo centrifugal dewatering machine for abrasive finishing applications, manufactured in 2008. Ljdpfx Abjy Rnfpozsag Operating hours: 27,234 h Application: vibratory finishing machines 1x tilting sludge cart (forklift compatible) 1x two-compartment tank (650L dirty water / 650L clean water) with diaphragm pumps and agitator 1x aluminum drip tray for the tank Various fittings and sensors Electrical cables and pneumatic lines to be reconnected or replaced 1x PDF documentation in German Software backup to be performed by the buyer Warranty expired (last factory maintenance in 2019) Machine type: Z 1200 ASS-2-turbo Year of manufacture: 2008 Serial number: 44478/08 Centrifuge weight: 1200 kg Motor power: 11.0 kW Rated power: 20.00 kW Rated current: 45.0 A Maximum rotation speed: 2650 rpm Maximum load: 65 kg Maximum flow rate: 1000 l/h Supply voltage: 400 V Main supply: 400 3 Ph/N/PE V Frequency: 50 Hz Fuse protection: 50 A Control voltage: 24 V DC Maximum ambient temperature: 40 °C Product temperature range: 50 °C Inner diameter of the drum: 500 mm If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Weight: 8.1 kg Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) Ljdpfexv Dhnjx Abzeag 100V, 50/60 Hz, 190W, 2.7A (Japan) 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: good (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, Rühle Tumbler MKR 130 380V Lajdpfoz D Dryox Abzsg With vacuum and cooling.

Year of construction: 2020, condition: like new (used), As-new drying centrifuge For drying bulk parts For stain-free drying of workpieces after vibratory finishing Continuously variable speed control from 700 to 1100 rpm Adjustable hot air temperature Max. batch weight 5 kg Basket: Ø270 mm x 190 mm Timer: 1–60 minutes Heating power: 2.1 kW Voltage: 230 V Dimensions: 70 × 50 × 95 cm (L × W × H) Ledozzkw Tspfx Abzjag

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Lasdpspu A D Aofx Abzeg Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Year of construction: 2014, condition: ready for operation (used), machine/vehicle number: 5125781, Alfa Laval ALDEC 45 Decanter Centrifuge – For Sale Alfa Laval ALDEC 45 industrial decanter centrifuge in very good working condition. The machine has been well maintained and is suitable for continuous solid-liquid separation applications. Key Specifications: Manufacturer: Alfa Laval Model: ALDEC 45 Year: 2014 Machine / Serial No.: 5125781 Maximum Bowl Speed: 4,200 rpm Main Motor: Approx. 22 kW Back Drive Motor: Approx. 5.5 kW Bowl Diameter: Approx. 360 mm Processing Capacity: Approx. 3–15 m³/h, depending on feed characteristics and separation requirements Continuous industrial operation Heavy-duty stainless steel construction Location: Türkiye Condition: Very good, ready for operation Lasdpjzu S Uyofx Abzeg Suitable for various industrial separation applications, including wastewater treatment, sludge dewatering, chemical processing, food processing and other solid-liquid separation processes. The machine is available for inspection. Additional photos, technical details and videos can be provided upon request.

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Ledpfxsz Di Nwe Abzjag Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Condition: ready for operation (used), Chip – Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500 mm - Speed / power: 1000 rpm, adjustable up to a maximum of 1400 rpm Laodpfezylzqox Abzog - Includes documentation & electrical diagram Dimensions L x W x H: 0.7 x 0.7 x 1.2 meters / Weight approx. 250 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Internal article number: 26098 Centrifuge Rösler Z 1000 ASS-2 Turbo Year of manufacture: 2006 Last maintenance performed with service report from 02/2026 The system is fully functional and in good condition. Operating hours according to the maintenance report: approx. 32,000 hours (as of 02/2026) Dimensions (L x W x H): Centrifuge: 110 x 150 x 230 cm Lift pump: 50 x 70 x 80 cm Ljdpfxjz Dg T Hs Abzsag Demineralized water tank: 120 x 240 x 210 cm Please note that you can find the suitable vibratory finishing system among the other offers.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: P260302015, total height: 350 mm, total width: 300 mm, total length: 800 mm, overall weight: 80 kg, machine base height: 180 mm, INVENTORY STATUS: 3 UNITS For sale is a professional, multi-section process module manufactured to hygienic standards, designed for the food, brewing, or chemical industries. Main components of the set: • Pumps: Series of centrifugal pumps with stainless steel housings (protection against flooding/hygienic standard). • Flow measurement: Integrated electromagnetic flowmeters (visible control units with LCD displays, e.g., from Endress+Hauser or a similar class). • Construction: The entire unit is mounted on a stable stainless steel frame (skid type), which facilitates transport and installation in a new production line. • Piping: Complete acid-resistant piping with flanged and hygienic connections. Key advantages: Laedezrmvaopfx Abzog • Precision: Thanks to the flowmeters, the system allows for very accurate dispensing of liquids or monitoring of media transfer. • Hygiene: Stainless steel construction allows operation in CIP (Cleaning In Place) systems. • Ready for operation: Complete module ready to be connected to an existing process installation. Technical condition: Very good, the installation is regularly serviced and operates in a clean production environment.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Ljdpfozw Ucxox Abzoag Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Laedpfx Abszw Ug Rezeg Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer for sale a high-quality industrial centrifugal pump, the EDUR CBL 50-200/200, manufactured in 2023 by the renowned German company EDUR-Pumpenfabrik. The unit is designed for operation in demanding industrial conditions, ensuring high reliability, stable operating parameters, and low energy consumption. Model: CBL 50-200/200 Type: single-stage, horizontal centrifugal pump Capacity (Q): 51 m³/h Head (H): 50 m Maximum operating pressure: 10 bar Liquid temperature: up to 60°C Medium: clean and slightly contaminated liquids (without abrasive particles) The pump is characterized by a robust construction and is suitable for continuous operation in industrial installations. Ljdpfey Amumox Abzoag Motor technical data (Lammers, Germany): Power: 10.56 kW (50 Hz) / 12.1 kW (60 Hz) Rotational speed: approx. 2957 rpm (50 Hz) Efficiency class: IE3 (Premium Efficiency) Voltage: 400 V / 690 V (star/delta connection) Applications: – industrial and technological installations – cooling systems for machinery and equipment – water supply and water treatment systems – heating, ventilation, and air conditioning (HVAC) systems – pressure boosting systems The unit is characterized by low noise and vibration levels due to precise balancing and high-quality workmanship.

Year of construction: 2022, condition: used, A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available. Lodpfx Asz Dki Ejbzjag

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: P13.19W3479.01, MAYFRAN CENTRIFUGE VBU 300 400V/50Hz 0.55kW 1.29A Inlet diameter 400mm Equipped with SEW Motor DRN80MK4, manufactured in 2019, and a speed inductive sensor. The machine is almost unused, with original paint and no signs of wear. Complete with steel frame, RAL 5010 color. Lodpfx Aszky Awebzsag Fully operational machine, requiring only wiring. Available for testing. Frame dimensions: 1580x560x1680 (WxLxH) Footprint dimensions: 1580x680x1680 (WxLxH) Centrifuge inlet height from the ground: 2300, inlet diameter 400, equipped with a steel protection net. Outlet diameter: 200mm - Current height approx. 1000 - Maximum height approx. 1465

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Lsdpfszb Ab Ejx Abzjag Year of manufacture: 2019 Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Initial filling: 260 liters Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine • Very robust industrial design • High processing performance • Ideal for series production and precision machining Inspection possible by appointment. Location: Göppingen, Germany

Year of construction: 2025, condition: reconditioned (used), machine/vehicle number: C5623, Vertical axis basket centrifuge with top discharge, fitted with a bag, mounted on three legs (with tie rods and compression springs), used/second-hand. All parts in contact with the product are made of 316L stainless steel (except for the seals). Lajdpfx Aboynb Idjzsg

Year of construction: 2018, operating hours: 4,344 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 86091, FOR SALE: ROSLER Z800 CENTRIFUGE IN EXCELLENT CONDITION WITH DOUBLE TANK AND STAINLESS STEEL BASKET, CAN BE INSPECTED IN OPERATION. ALSO OFFERING TURBO WALTER TROWAL TT90-SM SERIAL NO. 23010868 IN EXCELLENT CONDITION, COMPLETE WITH ELECTRICAL PANELS AND FULL DOCUMENTATION (SEE PHOTOS; WALTER TROWAL CAN BE VIEWED BUT NOT TESTED IN OPERATION). AVAILABLE FOR SALE TOGETHER OR SEPARATELY. ROSLER Z800 €16,000 Lsdoxx Ttlspfx Abzeag TROWAL TT90 €14,000 THE ABOVE PRICES ARE EXCLUDING TRANSPORT.

Condition: excellent (used), functionality: fully functional, Cooled vacuum tumbler Brand Rühle Model: MKR 300 Becker vacuum pump Laedpfx Aowatd Nebzeg Year of construction: 2000 Dimensions: 2000 mm x 1250 mm x 3000 mm

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Lajdpfx Aoz A Avhebzog Pump specifications: Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Lsdezhui Hspfx Abzeag Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.