Used Morgan Rushworth Pbs Cnc 2600/90 for sale (19,861)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 90 t, Equipment: CE marking, 1 Used Morgan Rushworth year 2019 2.6metre x 90ton Downstroke Cnc pressbrake for sale Model: PBS CNC 2600/90 Year: 2019 With modern ESA touch screen cnc control 4axis in total - 2 axis back gauge Dwedeyziugepfx Akhea Euro style tooling and tool holders Upper and Lower Tooling VIDEO AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2021, power: 21 kW (28.55 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 300 mm, table length: 3,100 mm, ram plate length: 3,100 mm, total length: 4,350 mm, total width: 2,040 mm, total height: 2,515 mm, overall weight: 5,900 kg, Morgan Rushworth XPE CNC 3100/100 electric press brake in excellent condition. The machine has been used in our steel fabrication workshop and has completed relatively low operating hours. It has been well maintained and was recently serviced by the manufacturer. The press brake is fully operational and can be inspected and demonstrated under power prior to purchase. Specification: Year of manufacture: 2021 Pressing capacity: 100 tonnes Bending length: 3,100 mm Dedpfx Akozr Ngbehewa Maximum stroke: 300 mm Nominal power: 21 kW Electrical supply: 400 V, 50 Hz, three-phase Machine weight: 5,900 kg Overall dimensions: 4,350 × 2,040 × 2,915 mm Serial number: B 28015 The machine is available for inspection by appointment.

Condition: excellent (used), Year of construction: 2009, Year of manufacture: 2009. Bending length: 3100 mm. Pressing force: 160 tons. Maximum sheet thickness: 6 mm, with a material strength of 45 kg/mm². Dwsdpfxszq Aq Do Akhja Serial number: SN20090122. Country of manufacture: Great Britain.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like New Morgan Rushworth Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Morgan Rushworth Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Dodpfovgc Rtjx Akhjwa Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process.

Condition: good (used), Year of construction: 2000, Morgan Rushworth NC Downstroking Pressbrake – Year 2000 120 tonnes x 4000 mm. NC Backguage. Safety Guards. Top and Bottom Tooling and Toolholders. Dwsdpsxau Elefx Akhoa

Condition: used, Year of construction: 1978, x-travel 1000 mm Dedpszmir Tjfx Akhowa y-travel 900 mm z-axis 800 mm W-axis (spindle longitudinal) 500 mm spindle diameter 90 mm table surface area 1.000 x 1.000 mm table load 2,5 t spindle turning speed range 8- 1600 U/min power capacity - milling spindle 11 kW tool taper SK 40 | control Heidenhain TNC 407 dimensions 4,5 x 3,25 x 3,0 m weight of the machine ca. 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system

Condition: new, Heller SL90 F A 23 Uni Pro CNC 90 interface card in opened original packaging, 100% functional. Dodpfxji Ea E Ro Akhswa

Condition: ready for operation (used), Heller uni-Pro CNC 90 main control unit SN: 19298 24.002410 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dedpfx Aeulqhyjkhswa

Condition: ready for operation (used), Heller PLT 90 uni-Pro CNC 90 control panel SN:00214 - without key, used, good condition, 100% working, scope of delivery as per photos Dwjdpfx Akotyr Avshja

Condition: ready for operation (used), Heller XGC90 H 23 Uni Pro CNC 90 graphics card, used, 100% functional. Dsdpfx Akei Ea Hvshowa

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Dwodpfxoyv Nvts Akhoa Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. Dedpfjvl Eahex Akhewa • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Condition: new, capacity 90 degrees: round 105 mm capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm dimensions 650 x 310 x 300 m band speed 30 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg Dsdpfefv Aq Rex Akhswa Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Share of freight costs: EUR 25.

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Dwedpfekqz H Djx Akhea

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: U/min - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm - Multiple strokes - Swiveling arm with control panel and CNC control MEP Dwedpfx Aed Aai Tokhoa - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Condition: new, sheet width 2600 mm plate thickness 8,0 mm thickness at "Niro-steel" 5,0 mm down holder 12 Stück no. of strokes 18 Hub/min oil volume 200 ltr. cutting angle 1,5 ° engine output 15,0 kW weight of the machine ca. 6.300 kg range L-W-H 3525 x 2350 x 1700 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting Dedpoxab D Iofx Akhswa - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Djded En Ryspfx Akhowa Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH There's something for everyone!

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Dodpfxjy D E Rie Akhewa Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: used, This listing is for 1 of 2 Morgan Mini Monitor Series 900 Geiger Counter Dsdjxzgz Ijpfx Akhswa Over the years Mini Monitor 900s have earned an excellent reputation for reliability, performance, versatility, ease of use and value for money. The 900 series continues to be a popular choice in education, research, medicine, industry and amongst environmentalists and enthusiasts.

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement Dwedpfxjyrhcpo Akhsa ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Dedpfx Aexuv Udokhowa Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20 - 40V 235W, used, normal signs of use, 100% functional, scope of delivery as per photos Dwjdoulqg Nopfx Akhoa

Condition: used, Mecof CNC Bed Type Milling Machine x 9000mm Key Specifications Manufacturer Mecof Condition Used Stock Number 00265 Table Size 9000 mm × 2200 mm X-Axis Travel 7200 mm Y-Axis Travel 1008 mm Z-Axis Travel 2040 mm Universal Head Heidenhain TNC 426 CNC Control Hand Wheel Djdpfx Akjy N Amxshjwa

Condition: used, From Hegla glass cutting table type Formline KT-19-l, year 1997 System CNC 190 Dodpfx Akjwl Azzehjwa Power: 115V/230V AC, 6A/3A, 50/60Hz Width: 435 mm Height: 165 mm Depth: 420 mm Weight: 13,1 kg

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: Dedpfx Astrd T Tekhowa 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR