Used Mori Seiki Ntx1000/Sz for sale (970)

Condition: like new (used), Year of construction: 2010, operating hours: 14,010 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Ibodpfsy Rpq Tsx An Ijc Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki Iodpfoznnc Hex An Isbc swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Isdpfx Ajwztq Esn Iebc Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: ready for operation (used), Moriseiki SL-250B Ibedpfxjz Tc Exs An Ioc

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface Ibedpfxszr Hgxj An Ijc * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: good (used), Year of construction: 2002, MSG-501 control MAPPS (Fanuc) Max. turning diameter: 550 mm Max. turning length: 1,020 mm Travel axes X1/X2/Y/Z1/Z2/W: 565/160/1,077 mm Main spindle drive power: 22 kW Max. spindle speed: 4,600 rpm Bar capacity: 65 mm Spindle nose: A2-6 Sub spindle drive power: 15 kW Ibodjwwk Uaepfx An Ioc Max. sub spindle speed: 6,000 rpm Milling spindle max. speed: 7,000 rpm Capto C6 tool system Tool magazine with 60 tool stations Lower turret with 12 tool stations, 6 of which are live stations Max. speed of driven tools: 4,000 rpm Chip conveyor

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach Ibodpfxjy Spuue An Iec total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: used, Year of construction: 2008, turning diameter 600 mm turning length 1.045 mm control MSX - 711 III MAPPS III swing diameter over support 600 mm distance between spindles 1.255 mm max. bar capacity 65 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 22 kW no. of turning speeds 2 spindle nose JIS A2-6 spindle bore 73 mm C-Axis 0,0001 ° internal diameter 120 mm chucking diameter 200 mm Speed range Tool Spindle max. 12.000 min/-1 Power rating Tool Spindle 5,5 / 3,7 kW tool taper Capto C5 internal diameter 65 mm B - Axis 0,0001 ° swivellable +/- 120 ° x-axis 685 (610 + 75) mm y-axis +/- 125 mm z-axis 1 mm number of toolpositions 12 pos. Shank height for square tool 20 mm Drill shank diameter max. 32 mm tools in tool magazin 40 pos. max. tool diameter 70 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 4 kg change-time tool to tool 1,25 sec Rapid traverse X / Z: 50 m/min Rapid traverse Y: 30 m/min Rapid traverse X2 / Z2: 30 m/min total power requirement 88 kVA Iodpfjz At T Hsx An Ijbc weight of the machine ca. 16,5 t dimensions of the machine ca. 6,0 x 4,0 x 3,0 m High-Precision 5 Achsen CNC-Turning- and Millingcenter MORI SEIKI - NT 3200 DCG / 1000 SZ - 5 Axis - Swivable Milling-Head (B-Axis) - Subspindle - lower turret - approx. 11,300 power-on hours - approx. 9,200 spindle hours

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] Isdpfx Ajy I Dixen Isbc - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] MACHINE HOURS - Number of working hours : 18186 [h] EQUIPMENT - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 - Electric transformer

Condition: used, Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: MORI SEIKI, controller model: M730BM, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, overall weight: 11,100 kg, Equipment: chip conveyor, With dual pallet, Mori Seiki M730BM control system. Workholding and tooling not included. Ibodpfx Asz Sqrkjn Isc AVAILABLE: late January/early February 2027.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 Sale and collection: Sales are exclusively within the EU. Due to the high administrative effort and lack of experience with export processing, we cannot offer sales and deliveries to countries outside the EU. Collection, loading, packaging, and transport are the responsibility of the buyer and at their expense. The machine is still powered and available for immediate collection. • P8 power supply, with a value of 1500, was replaced in August 2024. • The spindle was repaired in 2017 and has since mainly been used for single-shift operation, as we primarily manufacture individual parts and small series. Therefore, the machine has mostly been used for setup work. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm*500mm) • Travel ranges: X630mm Y600mm Z650mm • Spindle speed: Milling spindle 12000 rpm • Chip conveyor Known defects: Ijdpfxeyt Nnps An Iebc The rapid traverse speed of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring is likely damaged during pallet changes, resulting in oil leakage. We have temporarily resolved this by installing a ball valve in between; we only need to open this when we change pallets, which we do not do very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being shut down for a longer period. The procedure for restoring it is known. If you have any questions or require further information, please do not hesitate to contact us.

Condition: not inspected (used), Year of construction: 2003, Vertical CNC milling machine MORI SEIKI NV500A/50 (2003) at auction. MSG-501 control, X-axis travel 800 mm, table 1,100 x 600 mm, 30-tool magazine, spindle up to 8,000 rpm, machine weight approx. 6,700 kg. Used CNC mill Ibjdjz I Ebqopfx An Ioc

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 Isdpfsz R T Exox An Ijbc - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: ready for operation (used), Mori Seiki ZT2500Y Ibodpfx Ajxur Hvon Ijc

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 200 mm, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 48 mm, rotational speed (max.): 5,000 rpm, bar passage: 45 mm, spindle nose: ASA 5, Equipment: documentation/manual, CNC MSC 501 Turning diameter: 150 mm Maximum turning diameter: 420 mm Maximum turning length: 200 mm Spindle/tailstock bore diameter: 48 mm Spindle/tailstock bar passage: 45 mm Spindle/tailstock nose mounting: ASA 5 Spindle/tailstock speed: 5000 rpm Spindle motor power: 7.5 kW Tailstock motor power: 7.5 kW Machine complete with: -Presetting on spindle and tailstock -No. 2 motorized turrets, 12 positions -Operating manuals and CE declaration Ibodpfx Ajz R Ug Dsn Ijc Year of manufacture: 1999

Condition: used, Year of construction: 1983, functionality: limited functionality, overall weight: 6,500 kg, The machine can be inspected by appointment. Ibodpfx Aszy Efijn Ioc Delivery is the customer's responsibility, but we can assist with packing and loading if required.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 920 mm, turning diameter: 400 mm, spindle speed (max.): 12,000 rpm, spindle bore: 65 mm, travel distance X-axis: 920 mm, rapid traverse Z-axis: 80 m/min, controller manufacturer: FANUC, controller model: 18iB, fuel: electricity, number of slots in tool magazine: 40, Equipment: chip conveyor, Mori Seiki Mod. MT 1500 SX 9-axis milling and turning machining center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum length between chucks of 920mm, maximum diameter of 400mm, bore of 65mm, spindle speeds of 4000 and 6000 rpm for chucks and 12,000 rpm for milling. 12-position turret with motorized tools, Y-axis, B-axis +/- 120, C-axis 0.001, ATC 40 tools and chip extractor. In excellent working order and can be seen working in Portugal. Ibjdpfx Aoh Elp Eon Iec

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Spindle speed: 12,000 RPM 20-tool changer Coolant pressure: 20 bar Renishaw Ibedpfozgrzksx An Ioc

Year of construction: 2004, condition: good (used), You can check under power, after scheduling an appointment. Isdpfx Aneidqwds Isbc Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. Ibodpfx Anez Sx Nqe Iec * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 39,768 h, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, number of axes: 3, This 3-axis MORI SEIKI SL-250ASMC was manufactured in 1989. It features a Z-axis travel of 520 mm and a B-axis travel of 515 mm, providing versatile turning and milling capabilities. The machine is equipped with a chip conveyor and a bar feeder for enhanced productivity. If you are looking to get high-quality turning and milling capabilities, consider the MORI SEIKI SL-250ASMC turn-mill centre we have for sale. Contact us for further details. - Control Unit: Mori Seiki MSD-501II- Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 142 A- Current Rating of the Spindle Motor: 78 A- Interrupting Capacity: 5 kA- Electrical Diagram No.: AEF0253- Rated Power: 49 kVA- Operating Hours: 39,768 h- Number of Axes: 3 Main Axes (X, Z, C) + Sub-spindle/Tailstock (B)- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Indexing: 360° (0.001° positioning)- B-Axis Travel: 515 mm- Additional Equipment: Chip conveyor, Bar feeder (Kurt Breuning IRCO Maschinenbau GmbH PROFIMAT Type 52.8 196, 2 kW, 200 V, 50 Hz, YOM 1998, Machine No. Ibjdpfx Aoz Sp Nzsn Isc Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar loader. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual foot pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor with integrated particle filters. * Extensive selection of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming guide, and operating manual. * Weight: 6,200 kg. Iedpfx Aoz Sx N Rjn Ijbc * Machine currently in operation. * Immediate delivery, unless sold immediately.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Isdpfxowvrfkj An Iobc Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: used, Year of construction: 1991, turning length: 530 mm, turning diameter: 340 mm, spindle bore: 78 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 3,500 rpm, overall weight: 6,000 kg, CNC MF T4, 3-axis machine with C-axis 12-position motorized tool turret Ibsdpfx Aeznvizjn Ijc 250mm chuck 78mm spindle bore Maximum spindle speed: 3500 rpm, power: 15 kW Distance between centers: 625mm Maximum turning diameter: 625mm Chip conveyor Weight: 6000 kg

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe Ijdjypb Nkjpfx An Iobc DOUBLE TURRET Model ZL-45 B Year 1991 CNC Fanuc Sold complete With documentation With chip conveyor