Used Mot. Trif. Nc Spe P2 for sale (13,709)

Condition: used, functionality: unexamined, Ferwood Code: RU0007508 - Manufacturer Code: 00B2006241D - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Nodpfxev Egdhs Akujlb

Condition: ready for operation (used), Lang CNC L-Step 22/2 MFP stepper motor controller, SN: V / 200 - 240 V / 50 - 60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Nljdsy Sdvaspfx Akujb

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Nsdpoxf Ikfefx Akujlb

Condition: new, Rexroth SE-B2.020-060.00.000 Brushless Permanent Magnet Motor with Heidenhain ERN 221.2123-500 Encoder ID No. 270 675 02, Serial No. as per photo, Hole spacing of mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm, unused, 100% functional Nlsdpfsi D Nthjx Akujb

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Nlsdpfxjwid Spo Akueb Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Nlsdpexfkm Aofx Akusb Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min Nodpfxex Ndbqe Akujlb table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min Nlodsh Ty Hkepfx Akusb feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Nedpfx Asywhvhjkuslb Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Nlsdpfjylawxox Akujb

Condition: new, Year of construction: 2025, pressing force: 20 t, – Capacity 20 tons – Bending capacity 200 x 12 mm Nedpfjvt Eunsx Akuolb – Stroke 200 mm – NC touchscreen control – Foot control – Emergency stop – 400V

Condition: new, Diesel engine P2-5-Z3.02 SN:4467, manufacturer unknown, unused, 100% functional, scope of delivery as per photos. Nedpfx Akox Ern Dsuslb

Condition: ready for operation (used), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20 - 40V 235W, used, normal signs of use, 100% functional, scope of delivery as per photos Nledpfx Aeulqg Nskuob

Condition: ready for operation (used), BWO Lorenz CNC 785 control panel and display 082205 SN: 4935.001 P2, used, normal signs of use, 100% functional, scope of delivery as per photos Nodjlcf Rbopfx Akuslb

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Nodpfx Aksw Nrpbeujlb Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: used, machine/vehicle number: 2801-0234, x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min spindle taper:SK 40 milling-head swivable +/-:90° quill stroke:60 mm total power requirement:1,09 / 2,0 / 4,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,3 x 1,1 x 1,6 cm m Nlodpfx Akscxxm Esueb Deckel FP2 NC Milling Machines. - Spilndle Head can be swiveled left or Right (90 °) - Angular Fixed Work Table: 620 x 390 mm (Max. Load 250 kg) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic handwheel for Easy Axis movement - Deckel Dialog 4 CNC control Systems - Mechanical hand-wheels for all axes to operate manually, Central Lubricant system, Chip tray with Splash cabin

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Weight: 8.1 kg Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) 100V, 50/60 Hz, 190W, 2.7A (Japan) Nlsdpfx Akoxv Dhnousb 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Nledpfxowl D Aao Akusb Test Procedure: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions over the phone.

Year of construction: 2024, condition: used, General information Field of application: Grounds care Serial number: LCELV1ZD0R6000133 Technical information Power: 52 kW (71 HP) Type of fuel: Petrol Weights Empty weight: 870 kg Carrying capacity: 1.550 kg GVW: 2.420 kg Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.77x1.62x1.85 Additional information Nlsdpjtzixpjfx Akujb Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2020, Edwards Pearson EPT-CNC-ECO-174x3200 Press Brake Serial number: 201105B Year of manufacture: 2020 Nledpfx Aksyrnfqjujb Axes: Y – Beam up/down movement X – Adjustment of back gauge and bending distance R – Back gauge up/down movement Crowning – Bending angle compensation Machine with EP10 control, 1750 kN nominal force, 3200 mm maximum bending length, Lintech SLA-3 laser protection, Wonder Foot control, and an extensive tool set.

Year of construction: 2015, condition: excellent (used), Spectra-Physics Spirit Dual Frequency Femtosecond Laser Nljdpfx Akeym Dtaoujb High Q Laser GmbH p/n: 06900 fR Rack LCR1 Used, device is in very good condition. Removed from "blue chip" pharma company in Cork, IE. Sold as seen

Condition: used, Year of construction: 2000, functionality: limited functionality, type of input current: three-phase, inner dimension length: 11,000 mm, inner dimension width: 1,050 mm, inner dimension height: 1,200 mm, overall weight: 10,000 kg, Equipment: documentation/manual, WDE MASPELL MCP 2000-V Vacuum Dryer + GRETEL 48kW Boiler – Complete Retrofit (2023/2024) Description For sale: WDE Maspell MCP 2000-V vacuum drying unit with an approximate wood drying capacity of 6 m³. This machine underwent a complete overhaul of its peripheral components in 2023 and 2024 for optimal recommissioning. Very few operating hours since refurbishment. Average Cycle: 3 to 4 days drying time for 27mm-thick wood at moisture content below 30% Retrofit history (2023): * Electric boiler: Brand new GRETEL TRT548 (48 kW) installed on June 16, 2023. * Protection: Sold with a custom-built Douglas fir shed designed specifically to protect the boiler and external equipment, as well as weather shelter for the electrical cabinet. * Maspell maintenance: Numerous wear parts replaced with new, original Maspell components. * Hydraulic system: Circulation pump replaced during boiler installation. * Heat exchanger: Plate heat exchanger replaced with new Barriquand brand plates. * Water treatment: New Eautex water softener installed with all connection accessories, protecting the system from limescale. Technical specifications: Njdpjy Igdfefx Akuolb * Control: MCP 2000-V system (technology introduced by Maspell in 1998). * Electrical cabinet: Tecnoelettrica Narni, year of manufacture 2000, IP55 protection. * Power supply: 380V / 400V - 50Hz. Current condition: The machine was in full operation until 2025. Only the vacuum pump is currently non-operational and requires repair or replacement. All other systems (heating, circulation, exchanger, automation) are recent or have been overhauled. Sold as is. If you have questions or need further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Nledpfx Akoyk Ip Toujb Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: good (used), internal diameter 200 mm grinding depth 80 mm stroke of the table X= 300 mm stroke of the table Y= 500 mm control FANUC 18i-TA total power requirement 7 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,950x2,330x1,640 m O K A M O T O High-Precision Internal Cylindrical Grinding Machine with FANUC CNC Control, System 21 i – TA, 2-Axis Simultaneous Machining For machining bores, end faces, and outer diameters in a single setup TECHNICAL DATA Internal grinding diameter: (6) - 100 mm Nljdpjy Dvnrefx Akueb Grinding depth approx.: 80 mm Max. table stroke: X-axis 300 mm Z-axis 500 mm Swing diameter over table: 600 mm Swing diameter in chuck cover: 260 mm Table speed: (X/Z-axis) 0.1 - 10,000 mm/min Swivel angle of workpiece spindle: -5 to +15 degrees Smallest input increment: X-axis 0.0001 mm Z-axis 0.0001 mm Workpiece spindle speed: 100 - 850 rpm Grinding spindle speeds: Standard (infinitely variable) up to 10,000 rpm and 20,000 rpm

Condition: excellent (used), Year of construction: 2010, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: S0M190-11-05, overall weight: 257 kg, load capacity: 20 kg, arm reach: 1,717 mm, controller manufacturer: YASKAWA, controller model: DX100, input voltage: 400 V, Equipment: documentation/manual, USED IN THE BIOMEDICAL FIELD Nedpfx Asx H S Hvokuslb