Used Movable Actuator 7 Pieces for sale (43,969)

Condition: used, Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 35 mm Podpfsdnn H Dex Ai Togu -Number: 7 pieces -Price: complete

Condition: used, Limit switches, buttons, safety switches, position switches -Activation radius: adjustable Pgsdpfx Aednn H Aji Teu -Minimum operating radius: 45 mm -Number: 30 pieces -Price: complete

Condition: new, Electronic throttle position sensor for diesel engines with adjustable settings for sensor wire breakage and short-circuit detection. The throttle position sensor can be used with all diesel engines that have a target speed setting via a resistor, e.g., Fendt, Steyr, Valmet, etc. This throttle position sensor can also be used with models equipped with Hall sensors. The necessary limit values for sensor wire breakage or short-circuit MCU error detection can be adjusted on the back using two adjustment knobs. Installation: The throttle position sensor must be wired in parallel with the tractor's manual throttle control. A toggle switch (included) allows switching between speed adjustment via remote control or normal manual throttle. Pgeds Adgagjpfx Ai Teu Technical data: Target value sensor resistance: 0-10 kOhm Wire breakage resistance: 0-1.5 kOhm Short-circuit resistance: 0-1.5 kOhm Inputs: Speed +: 5-14 VDC Speed -: 5-14 VDC Installation kit consists of: 1 electronic throttle position sensor 1 toggle switch, radio-0-manual 1 cable harness (cable length approx. 0.75 m) 1 set of mounting hardware 1 installation diagram Installation time: Approx. 2-3 hours, depending on the tractor model WARNING! ONLY SUITABLE FOR ENGINES WITH EMISSION STANDARDS BEFORE "TIER 4" (BEFORE 2019)! PLEASE INQUIRE FOR ENGINES WITH LATER EMISSION STANDARDS!

Condition: new, Core drill bit set, 7-piece, D.12-22mm, HSS-TiAlN, cutting depth 30mm, Weldon shank, RUKO · HSS · TiAlN-coated · with Weldon shank 19.05 mm (3/4") · CBN-ground · Contents: 6 core drill bits with Weldon shank (3/4") Ø 12, 14, 16, 18, 20, 22 mm, 1 guide pin Ø 6.35 x 77 mm for a cutting depth of 30 mm · Additional technical features: Contents: 7 pieces · Shank design: Weldon Pjdpfxe Aby Nie Ai Tegu · Cutting depth: 30mm Cutting material: HSS-TiAlN ø mm: 44896

Condition: new, Ring wrench set 7-08, 10-24mm, Form A, CV steel, GEDORE · CV steel · Chrome-plated · With identical wrench sizes · Ring side angled at 15°, jaw position 15° DIN 3113 Form A / ISO 3318 / ISO 7738 · Further technical characteristics: Maximum wrench size: 24mm · Material: CV steel · Standard: DIN 3113 Form A, ISO 3318, ISO 7738 · Minimum wrench size: 10mm Wrench sizes: 10, 12, 13, 14, 17, 19, 22, 24 mm Pode Ab A R Ajpfx Ai Tjgu Material: Chrome-vanadium steel Contents: 8-piece set

Condition: new, Set of 7 XLmm ring spanner wrenches, Form A, CV steel, GEDORE * Extra long * CV steel * Chrome-plated * With identical wrench sizes Psdpfxs Ab Dafs Ai Tsgu * Ring side angled at 15°, jaw position 15°, similar to DIN 3113 Form A * Other technical features: Maximum wrench size: 32mm * Material: CV steel * Standard: DIN 3113 Form A, ISO 3318, ISO 7738 * Minimum wrench size: 10mm Wrench sizes: 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, 32 mm Contents: 12-piece set Material: Chromium-vanadium steel

Condition: new, Core drill bit set, 7 pieces, D. 12-22 mm, HSS cutting tool, 30 mm, Weldon shank, RUKO · HSS · with Weldon shank 19.05 mm (3/4") · CBN-ground · Contents: 6 pcs. core drill bits with Weldon shank (3/4") Ø 12, 14, 16, 18, 20, 22 mm, 1 guide pin Ø 6.35 x 77 mm for cutting depth 30 mm · Other technical features: Contents: 7 pieces · Shank design: Weldon · Cutting depth: 30 mm Cutting material: HSS Contents: 7-piece set Cutting depth: 30 mm Shank design: Weldon Pgsdpfj Aby Ncex Ai Teu

Condition: new, Ring wrench set 7-020, 8-32mm, Form A, CV steel, GEDORE · CV steel · Chrome-plated · With identical wrench sizes · Ring side angled at 15°, jaw position 15° DIN 3113 Form A / ISO 3318 / ISO 7738 · Further technical features: Maximum wrench size: 32mm · Material: CV steel · Standard: DIN 3113 Form A, ISO 3318, ISO 7738 · Minimum wrench size: 8mm Material: Chrome-vanadium steel Wrench sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 30, 32 mm Contents: 20 pieces Pjdpfx Ae Ab A T Doi Tegu

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm Pjdpfepix Nksx Ai Togu -Weight: 34.4 kg

Condition: new, Electronics pliers set, 7-piece. 6 pliers, 1 precision tweezer, KNIPEX. · For working on electronic components. Contents: 1 electronics gripping pliers, 115 mm, with opening spring, flat, wide jaws, through-pin joint; 1 electronics diagonal cutter, 115 mm, with small facet, opening spring, through-pin joint; 1 electronics gripping pliers, 115 mm, with opening spring, flat, round jaws, through-pin joint; 1 electronics diagonal cutter, 115 mm, with opening spring, without facet, pointed head, through-pin joint; 1 electronics gripping pliers, 115 mm, with opening spring, pointed, round jaws, through-pin joint; 1 precision tweezer, 155 mm, 45° angled, polished, nickel-plated, finely toothed tips; 1 electronics front cutter, 120 mm, with opening spring, with small facet, through-pin joint. Pgsdpo Abzp Rofx Ai Teu · Further technical features: Contents: 6 pliers, 1 precision tweezer. · Packaging: in a case. Contents: 7-piece set.

Condition: used, Year of construction: 2003, 1 used drill machine combination Manufacturer: Lemken Year of manufacture: 2003 Identification number: 171103 Working width: 3.00 meters Disc harrow Zirkon 9/300, serial number 255924 with 12 bolted discs PTO shaft with cam-actuated safety clutch, PTO drive, trapezoidal packer roller. Seed drill Saphir 7 DS 300/24R 175, serial number 265279 Row spacing adjustment 17 x double-disc coulters Depth control rollers Lighting with warning signs 1 spur gear Pgedpfx Aj Af Tf Dji Tsu Operator terminal Location: 91575 Windsbach Further information from Wolfgang Friederich Tel:

Condition: good (used), Flat belt pulley, belt pulley, drive pulley, roller pulley -Pulley: Flat belt pulleys 7 pieces Pedpswuzk Hefx Ai Tjgu -Width 70 mm -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions box: 430/210/H115 mm -Weight: 11 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 7 pieces Pjdpfx Ajv D Dn Uoi Togu -Type: Mod.1,75 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 350/190/H120 mm -Total weight: 22.2 kg

Condition: used, functionality: fully functional, Koganei ORGA40X2750 Linear actuator. Pgodstwqqgjpfx Ai Tou Good working condition. Please check out our other listings as well.

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck, quick-change thread chuck -Manufacturer: Holex, Thread cutting chuck, quick-change thread chuck, 7 pieces Pedpfx Aijzcu Sro Tegu -Type: 335620-10 -Size: M5 to M20, see photos -Submission/Price: complete -Transport dimensions: 330/120/H70 mm -Weight: 4.4 kg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg Pgsdpfexdk Absx Ai Tsu

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block Pgodszfy Rkjpfx Ai Tju -Scribing prism: Prism block for scribing plate, clamping plate, straightening bench ... 7 pieces -Prism width/dimensions: see photos / technical drawing -Submission/Price: complete -Overall dimensions: 645/79/H80 mm -Total weight: 24.6 kg

Condition: new, Rotor blade, 200 x 73.5 x 15 mm 7 pieces available Price per piece: 60 EUR Price for all 7 pieces: 350 EUR Pgjdpfxezakrce Ai Teu

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter Psdpfxjx R Sy Rj Ai Togu -Morse taper sleeves: extensions / adapter sleeves MK6 -Type: SWN 136/29 MK6-MK6 / MK6-MK5 / MK6-MK4 -Dimensions/Quantity: see photos -Transport dimensions: 500/480/H95 mm -Weight: 50.7 kg

Condition: used, Dematic conveyor system Roller conveyors 19500-600-540 RA2370 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL): 19500mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Pjdpfxsv D Saro Ai Togu Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Dematic conveyor system Roller conveyors 20370-600-540 RA2369 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL):20370 mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Pedpfov D Salex Ai Tsgu Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Open-end and ring wrench 7 XL, size 36 mm, length 550 mm, shape A, extra long, chrome vanadium steel, GEDORE · extra long · chrome vanadium steel · chrome-plated Pedpfxj Ab A Uzj Ai Tsgu · with identical wrench sizes · ring side angled at 15°, open-end position at 15°, similar to DIN 3113, shape A · Further technical features: Design: Shape A, extra long Material: Chrome vanadium steel Wrench size: 36 mm Overall length: 550 mm

Condition: new, Ring wrench set, 7mm, Form A, CV steel, GEDORE · CV steel · Chrome-plated · With identical wrench sizes · Ring end angled 15°, wrench head position 15° DIN 3113 Form A / ISO 3318 / ISO 7738 Psdpfs Ab A R Nox Ai Tegu · Other technical features: Maximum wrench size: 32mm · Material: CV steel · Standard: DIN 3113 Form A, ISO 3318, ISO 7738 · Minimum wrench size: 10mm Contents: 12-piece set Wrench sizes: 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, 32 mm Material: Chromium-vanadium steel

Condition: new, Ring spanner 7 XL, size 46mm, length 640mm, form A, extra long, CV steel, GEDORE · extra long · CV steel · chrome-plated · with identical wrench sizes · ring end angled at 15°, jaw position 15°, similar to DIN 3113 form A Pgodpfx As Ab A U Usi Teu · further technical features: Design: form A, extra long Wrench size: 46 mm Material: Chrome-vanadium steel Overall length: 640 mm

Condition: new, Ring wrench 7 XL, size 41mm, length 600mm, shape A, extra long, CV steel, GEDORE · extra long · CV steel · chrome-plated · with identical wrench sizes · Ring side angled 15°, jaw position 15°, similar to DIN 3113, shape A · Other technical features: Design: Shape A, extra long Material: Chromium-vanadium steel Wrench size: 41 mm Overall length: 600 mm Psdo Ab A U Ijpfx Ai Togu