Used Mps Flexographic Printing Press for sale (15,235)

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: H345, type of input current: three-phase, Equipment: documentation/manual, MPS EF330-6 UV flexographic label printing press, year 2008, machine no. H345, with approx. 30 million metres. The press was previously used for aluminium lid stock printing in Switzerland. Main equipment: - 6-colour UV flexographic printing press - GEW UV curing system: 5 × VCP + 1 × E2C, 6 e-Bricks - Heavy-duty unwind and rewind - 6" plus 3" unwind shafts, and 3" rewind air shaft - Roll lift on unwind and rewind - BST web guide with ultrasonic sensor - BST Powerscope web inspection - Vetaphone corona treater - Double-sided Teknek web cleaner - Automatic servo register - Rotary die-cutting station + Kocher & Beck GapMaster - FST edge trimming with two crush knives - 6 anilox rollers Kedpfxjz Itb So Ag Asdu - 7 magnetic cylinders + 42 print cylinders mady by Spilker, covering repeats from 8" to 13.25" The machine has a documented service and maintenance history, including the original MPS installation documentation, GEW UV servicing, Bosch Rexroth servo maintenance and BST web-guide upgrade. Current condition: The press is operational and can be inspected under power. The Cool Master process chiller currently requires repair and is not in service. The GapMaster requires re-synchronisation following replacement of a support cylinder bearing. There is no known mechanical defect; adjustment requires the appropriate setup gauge.

Condition: excellent (used), Year of construction: 2001, MPS EP 410 Kdodpfx Agez Rqd Re Asu Year: 2001 8-color UV flexo printing press (can alternatively be equipped with multiple screen printing units) Cold foil application Lamination Turning bar, delamination/relamination Die-cutting unit with Kocher & Beck GapMaster ABG Flytec 100% inspection system Includes accessories

Condition: used, Year of construction: 2000, The Carint central impression flexographic printing press is designed for printing on PE, PP, OPP, PET films, and paper. The machine features 6 printing units (6+0), a geared drive, and is suitable for a wide range of flexible packaging applications. Material width: 1,280 mm Printing width: 1,250 mm Print repeat: Min: 360 mm / Max: 1,040 mm Mechanical speed: Up to 300 m/min UNWINDER AND REWINDER The machine is equipped with a non-stop turret unwinder and a non-stop turret rewinder. Maximum reel diameter: 800 mm. Expanding shafts: 3" DRYING SYSTEM Electrical drying system. Kdjdpfx Agozku Nle Aju INK SUPPLY 6 pneumatic ink pumps. ACCESSORIES • Motorized longitudinal register • Chamber doctor blade system • 8 Anilox cylinders • 6 Plate cylinders • Video inspection system • Web guides • Banana rollers • Plate cylinder lifting hoist • 2 electrical hoists • 2 cylinder storage racks with 6 cylinders of various repeat sizes

Condition: used, Year of construction: 2011, Printing & Processing Units: Kjdpey Rp E Defx Ag Aedu - 5 x EXL offset printing units (single) - 1 x Flexo printing unit (single) - 1 x EC printing unit on rail - 7 x UV drying stations (GEW HCP) - Corona S-unit - Die-cutting and laminating nip - Laminating unit – unwind / rewind Web Handling - Combination unwind / infeed unit S-1000 - Web cleaning unit (TEKNEK, single) - Web turner unit with backside reading - Combination outfeed / rewind unit S-1000 - Edge trimmer / crush cut unit Registration & Control - Single matrix unit - Double vertical die unit (SD) - Main control unit - Web video powerscope 4000 (motorized) - ELTROMAT key adjustment system Auxiliary Systems - Technotrans water dampening system - Cooling water in / out for cooling rollers (UV system) - Exhaust air connection (max. 70 °C)

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. Kdedpfxjza Synj Ag Aou The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Manufacturer / Model: Siat L36 150 TC CE Year of manufacture: 2014 Condition: used, good Function: functional Application: printing adhesive tape CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FP-201610-09, working width: 960 mm, roll width: 1,000 mm, roll diameter: 1,500 mm, 4 color flexo print machine made in Korea, used for paper cup printing; Max speed 100m/min Max cardboard width - 1000mm Including: 1) 7 sets of print cylinders, total 28 cylinders 2) 8 aniloxes Ksdpfx Agovkp Dns Ajdu 3) Printing plate mount table with two cameras 4) Printing plate storage table

Condition: excellent (used), Year of construction: 1994, LEMOFLEX INLINE PRINT Year of production: 1994 Kdjdpfx Ajzk U N Esg Aju web material 1200 mm web width 1000 mm Speed 150m/min 4+0, 2+2,3+1

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer Kdedpfx Agsw Rya De Asu SERIAL WORK(mm): 1290x2600 HOPPER OPERATION(mm): 1550x2600 MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 MAIN MOTOR POWER(kw): 15

Condition: excellent (used), Year of construction: 1992, Arpeco Impressionist 420mm web width unwind with roll lift and pneumatic 3” mandrel splice table web guide Sherman corona treater 7 x print units 7 x double UV dryers 7 x chill rolls all UV lamps are BRAND NEW ! 1 x 9.5kW chiller IR dryer Hot Air Kdedporrvzrofx Ag Aju end of press double size chill roll 2 x rewind mandrels pneumatic 3” many print cylinders and anilox rollers

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, product width (max.): 1,240 mm, working width: 1,200 mm, type of input current: three-phase, overall weight: 8,300 kg, total length: 6,500 mm, total width: 2,700 mm, We offer this very good Lisheng YTC 41200 flexographic printing press, year of construction 2019. 4 colors 1200 mm width. Excellent condition can work for many more years. We bought a new machine from the manufacturer so there is no need to worry about after sale parts they have it all. Film printed: PE, PET, BOPP, CPP Kdsdpfoz Egz Hex Ag Aju Manufacturer: Lisheng Model: YTC 41200 Year of construction: September 2019 Printing cylinder: 330 mm 350 mm 380 mm 450 mm 500 mm 550 mm 600 mm 700 mm Anilox cylinder lPI & BCM 300 5.8 300 5.4 350 5.2 400 4.4 400 3.4 200 8 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2019, product width (max.): 530 mm, roll diameter: 1,000 mm, We offer this used OMET X6 530 flexographic printing press, year of construction 2019. Kedpfx Aeyfh Aiog Ajdu Manufacturer: OMET S.r.l. Model: X6 530 Serial Number: 2188 Year of Construction: 2019 Machine Type: web press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Kdsdpfx Agoyplyao Aou Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Kodeyalqyopfx Ag Aodu Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Kdodpfxevakdze Ag Aeu Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind Ksdpfx Aezp R Dpog Ajdu * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE • PP films

Condition: good (used), Year of construction: 2008, Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Kdsdpfez A Thbjx Ag Asu Heavy-duty construction with pneumatic shaft and web tension control Integrated splicing table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turn Bar (Web Inversion Unit) Allows reverse-side printing or lamination – flexible for multi-layer label applications Rerailing Section 24” Supports reprocessing or secondary processing of pre-printed materials Additional Modules Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross-Cutting Cylinder (inline sheeting or perforation – precise longitudinal or transverse cutting) Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations Kdsdpfoyn Sclox Ag Aeu • Double-shaft rewinder

Condition: used, Year of construction: 2003, General technical data: Machine type: Flexographic printing press Web width: 330 mm Number of colors: 6 Kjdpfxeyn Scfo Ag Ajdu Equipment & Configuration: • Turning bar • 2 die-cut stations • 2-shaft rewinder • 6 UV IVT lamps • Video camera system • 3 sets of cylinders • 6 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2008, machine/vehicle number: 1277, product width (max.): 670 mm, working width: 670 mm, type of input current: three-phase, Label flexo printing machines OMET Varyflex Year 2008 - POLAND Number of colors: 8 Drying system: UV GEV Printing width: 670 mm Flexographic printing repeat (min): 12” Flexographic printing repeat (max): 33” Maximum unwind diameter: 1000 mm Maximum rewind diameter: 1000 mm Drying units: 8x UV, 5x hot air Mechanical speed: 200 m/min 76.2 mm – 3” shafts BST web guide Corona Vetaphone Video BST Availability: Immediate Kodpfxeziz Hus Ag Aedu Operational status: In production Sleeves (8 pcs of each size – one sleeve for each of the 8 printing units): 14” 8/48 359.833 mm 14” 16/48 364.067 mm 15” 3/8 390.525 mm 16” 4/8 419.1 mm 18” 4/8 457.2 mm 19” 4/8 495.3 mm 19” 13/16 503.238 mm 22” 5/8 574.675 mm 24” 13/16 630.238 mm 27” 4/8 698.5 mm 29” 6/8 755.65 mm 32” 3/8 822.325 mm Anilox rolls: 500/4 – 2 pcs 500/3.8 – 1 pc 500/3.5 – 2 pcs 500/3 – 2 pcs 500/2.5 – 2 pcs 470/3.1 – 1 pc 400/5 – 2 pcs 400/4.5 – 2 pcs 380/5.5 – 1 pc 340/6 – 1 pc 320/5.5 – 3 pcs 320/7 – 1 pc 280/6 – 2 pcs 280/8 – 1 pc 180/12 – 2 pcs 140/8 – 1 pc 120/10 – 1 pc 100/14 – 1 pc

Condition: excellent (used), Year of construction: 2007, NILPETER FA 4250 Year: 2007 Working width: 420 mm Number of units: 8 8 UV printing stations + hot air drying on 8 stations New UV curing system installed – GEW E2C (year 2020) Servo driven Water-cooled chill rollers Printing cylinders and anilox rollers in sleeve version Unwinder (roll max. 1000 mm) Kdodpfxjyq Hclj Ag Aeu Roll splicing table Corona treater Longitudinal waste slitting with waste removal Sheeter table for roll-to-sheet cutting Software for cold foil printing Rewinder with pressure roller (roll max. 1000 mm) Video inspection camera Printing substrate thickness: 25–300 µm Automatic register control Includes 10 anilox rollers Includes 8 sleeve-type print cylinders (552.45 mm)

Condition: excellent (used), Year of construction: 2004, Gallus EMS 410, 2004 Unwind unit E L electronic web guide Arcotec Corona Treatment unit 7 servo-driven flexo print stations 7 IST UV dryers 7 servo-driven water-cooled chill rolls rail system delam/relam rotary die station with K&B Gapmaster Matrix rewind Magnetic die crane und hoist BST video control Sensotec automatic register control Exit die with nip Rewind touch screen control panel 21 anilox rollers 9 magnetic cylinders Kdjdpfx Ajv E Rizog Asu 84 print sleeves Tooling: 12x7 Printing cylinders: 89; 96; 102; 104; 106; 108; 116; 117; 121; 168; 9x Magnetic Cylinders: 89; 96; 102; 104; 108; 112; 116; 117; 120. 1x rubber roller for varnishing. 21x Anilox rollers Good working condition In production, can be inspected at any time

Condition: ready for operation (used), Year of construction: 1994, Web width: Max 1250 Print width: 1230 mm Print repeat Max 760mm , Min 300mm Kedpfx Aewvvwdsg Ajdu Max. mechanical speed: 300 m/min Single unwind Max. unwind diameter: 1250 mm Drying type Boiler Substrate types: Paper, polyethylene (PE), polypropylene (PP), and other flexible packaging materials Ink system: Solvent-based inks/water-based inks

Condition: used, Year of construction: 2001, 8 colors Printing width (endless sleeves) Max.: 1270 mm Printing width (non-endless sleeves) Max.: 1250 mm Maximum mechanical machine speed: 460 m/min Gear pitch: 10 mm Printing length / repeat: 300–1200 mm Material width: max. 1320 mm Materials Suitable for processing: LDPE, PP, PA: 20–150 µm HDPE, OPP: 12–100 µm Laminated films: max. 120 µm Paper: 30–120 g/m² Unwind / Rewind Maximum roll diameter, unwind: 1000 mm Maximum roll diameter, rewind: 1000 mm Core inside diameter: 76 mm Core outside diameter: 85 mm Maximum roll weight: 1240 kg Drying system Printing unit supply air: max. approx. 5,250 m³/h Printing unit fresh air: approx. 2,620 m³/h Bridge supply air: max. approx. 8,430 m³/h Bridge fresh air: approx. 2,150 m³/h Recirculated air: approx. 5,600 m³/h Supply air temperature, printing unit: max. 100 °C Supply air temperature, bridge: max. 120 °C Equipment / Features Kedpfozvfgfex Ag Aodu W&H Turboclean ink supply system Unwind and rewind units Drying system Corona treatment Operator control system Printing cylinders and accessories Anilox rollers Portalift system

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing Kdjdpfx Aey Ey Nisg Aeu - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Web width: 430 mm Number of colors: 6 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • 3 die-cut stations • 2 gap master units • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color • 3 sets of sleeves • 6 anilox rollers Kjdpfxjyn Sb Us Ag Aodu • 3 magnetic cylinders