Used Mtm Pile Driver Prk 10 - 1 Unit for sale (111,865)

Condition: new, The PRK 10 proves to be excellent in fence construction as well as in landscaping and nursery applications. The handles allow for easy lifting, lowering, and guiding. It provides high performance for posts up to a diameter of 90 mm, for example, for post connections during new plantings. The relatively lightweight design and low piston weight make working with it very comfortable. Weight: approx. 14.8 kg Air consumption: 600 l/min Impact rate: 2100/min Impact energy: approx. 185 Joules at 7 bar Operating pressure: 6 - 8 bar Sleeve diameter: approx. 91 mm, other sleeve diameters available on request Post diameter: 45 - 90 mm Handle length: approx. 1 m Njdpo Adillsfx Ai Tswn Weight: 15 kg Air consumption: 600 l/min Max. outer diameter of the rammed material: up to 90 mm Impact rate per minute: 2100

Condition: new, The compact design of the PR 10 saves on costs and weight, and it also allows posts to be driven down to the lower edge of the sleeve with a diameter of 90 mm. - Pneumatically operated, free-moving pile and post driver Nwodpfx As Adilxsi Tsn - For quickly and ergonomically driving in posts of all types - Can be handled both vertically and horizontally Weight: 10.0 kg Standard guide sleeve: 90 mm (included in delivery!) Post diameter: 70 - 90 mm Air consumption: approx. 600 l/min Impact rate: approx. 2,100/min Impact energy: approx. 185 joules per impact at 7 bar air pressure 1-inch claw-type pneumatic coupling One driving attachment or guide sleeve for posts of 70-90 mm is included in the delivery. (Further driving attachments are available as optional extras) Air consumption: 600 l/min Weight: 10.0 kg Impact rate per minute: 2100 Max. outer diameter of the post: up to 90 mm

Condition: new, For the ergonomic creation of boundaries, delimitations, barriers, wildlife fencing, and installations for fruit and garden cultivation, as well as for vineyards. Also suitable for well filter pipes and the installation of information signs. Designed for the quick, safe, and body-friendly installation of posts of all types, regardless of whether they are round profiles, square profiles, Z-profiles, or made of wood or metal. The PRK 4 excels particularly in the installation of guide and snow posts. It is very lightweight and easy to handle. The long handles allow for the installation of long posts, with the end still protruding significantly. Thanks to its low air consumption, it is the ideal partner for municipal construction teams. It can be operated via the braking system of motor vehicles. (Sufficient sizing of the compressed air system is necessary!) Sleeve diameter, standard: 60 mm Post diameter, max.: 60 mm (depending on soil structure) Operating pressure: 4.0 to 7.0 bar Ramming energy: approx. 105 Joules at 7 bar Impact rate: 2600/min Air consumption: 450 l/min Connections: Compressed air quick-release coupling, 1/4 inch Handle length: approx. 1m Sound pressure level: approx. 94 db Nwods Adil Espfx Ai Tjn Weight: approx. 13.5 kg Air consumption: 450 l/min Max. outer diameter of the ramming material: up to 60 mm Weight: 13.5 kg Impacts per minute: 2600 Operating pressure: 4.0 to 7.0 bar

Condition: new, The PRK 26 is an extremely powerful machine with a low weight. The ram is placed on the pile and operates independently after the release valve is opened. With this machine, you can drive ramming elements with a diameter of up to 120 mm into the ground without pre-drilling. Weight: 29.0 kg Air consumption: Neds Adilrspfx Ai Tswn 1300 l/min Impact rate: 1600/min Impact energy: approx. 255 Joules at 7 bar Operating pressure: 4.0 - 7.0 bar Sleeve diameter: 120 mm, other sleeve diameters available upon request Handle length: approx. 1 m Impact rate per minute: 1600 Weight: 29.0 kg Max. outer diameter of the ramming element: up to 120 mm Air consumption: 1300 l/min

Condition: new, - Pneumatically operated, free-floating pile and post driver - For quick and ergonomic driving of posts of all kinds - Can be used both vertically and horizontally! For: - Wooden posts - Metal posts - Steel pipes - Pipe posts - T-beams - Steel profiles - Grounding rods - Guide posts - Barrier posts Nwedpfxj Adik Is Ai Tsn - Tent poles Weight: 40.0 kg Impact rate per minute: 1300 Max. outer diameter of the driven material: 130 mm Air consumption: 1400 l/min

Condition: new, Ideally suited for installing all types of planting aids! Smallest pneumatic ram for ergonomically driving in all types of ramming material with a diameter of approximately 10 mm to a maximum of approximately 35 mm, such as wooden or metal posts, plastic planting aids, and clay stake rods. The MPR is a compressed air-operated miniature ram, equipped with a mechanical quick-release fastener for fixing the ramming material, which enables parallel driving of the ramming material. Nwjdpfxe Adikuo Ai Tsn Air consumption: 300 l/min Weight: 5.0 kg Number of strokes per minute: 2300 Maximum outer diameter of the ramming material: up to 30 mm

Condition: new, The PR 24 is the classic free-rider model. The ram is placed on the post and, after the release valve is opened, operates independently. The powerful strokes of the piston drive ramming material up to 90 mm in diameter into the ground without pre-drilling. In the free-rider models, the sleeve size can be changed with minimal effort. - Pneumatically operated, free-rider post and pile rammer - For quick and ergonomic ramming of posts of all types - Can be operated both vertically and horizontally! Weight: 24 kg Standard guide sleeve: 90 mm (included!) Ramming material diameter: 80 - 90 mm Air consumption: approx. 1,000 l/min Stroke rate: approx. 1,800/min Impact energy: approx. 215 Joules per stroke at approx. 7 bar air pressure 1-inch claw-type pneumatic coupling One ramming attachment or guide sleeve for posts 80-90 mm is included. (Further ramming attachments available as an option) Maximum outer diameter of ramming material: 90 mm Air consumption: 1000 l/min Stroke rate per minute: 1800 Weight: 24.0 kg Nwjdpfxo Adikzo Ai Tjn

Condition: new, The PR 4 is the lightweight champion among professional post drivers and offers excellent handling. Its short handles give it a compact design, making it easy to transport. For short post lengths and when good guidance is desired, the PR 4 is the ideal choice. Nodpfo Adilfjx Ai Town Standard guide sleeve: 60 mm (included!) Post diameter: 40-60 mm (depending on soil structure) Operating pressure: 4-7 bar Ramming energy: approx. 105 Joules at 7 bar Impact rate: 2,600/min Air consumption: 450 l/min Connections: quick-release coupling for compressed air, 1/4 inch Handles: top (without handle extension) Sound pressure level: approx. 94 dB A ramming attachment or guide sleeve for posts of 40-60 mm is included. (Additional ramming attachments available as an option.) Max. outer diameter of the post: up to 60 mm Weight: 11.5 kg Air consumption: 450 l/min Impacts per minute: 2600

Condition: new, - Pneumatically operated, free-floating post and pile driver - For quick and ergonomic driving of posts of all types - Can be handled both vertically and horizontally Weight: 45.0 kg Nwodpe Adik Uofx Ai Ten Air consumption: 1600 l/min Impact rate: 1100/min Impact energy: approx. 375 Joules per impact at approx. 7 bar air pressure Diameter of driving material: 140 mm 1-inch claw-type pneumatic coupling One driving attachment or guide sleeve for posts of 120-140 mm is included. Impact rate per minute: 1100 Weight: 45.0 kg Max. outer diameter of driving material: 140 mm Air consumption: 1600 l/min

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, bale length: 2,330 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Nwodps Afxcijfx Ai Ten Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Year of construction: 2025, condition: new, Standard version with column Motorized height adjustment 700 mm Articulated arm length 2 x 1,100 mm Height adjustment of the grinding spindle 130 mm Grinding motor 5.5 kW Nwsdjgn Tzlepfx Ai Tsn Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and mounting template Grinding tools available as an option Request more information

Condition: good (used), Polar Mohr PW-1 Pile turner Nedpjz Rkh Asfx Ai Town This machine is like new, fully functional, and ready to use. Technical specifications: Format: 660x800mm Stack height: 1250mm Load capacity: 500kg Device weight: 700kg Power supply: 380V Controlled from a control panel, fast operation, hydraulic drive. Noiseless operation. Compact design, space-saving.

Year of construction: 2004, condition: good (used), Laservall KUBO100 Tempering Unit (2004) The Laservall KUBO100 is a compact, fiber-delivered pulsed Nd:YAG welding system often utilized for precision laser welding and micro-welding applications. It is frequently featured as part of the Master Kubo Series from Laservall S.P.A. (Italy), Nodsu Aqr Iopfx Ai Tjwn designed for high-precision manufacturing, often in industrial settings. 1. System Type: Pulsed Nd:YAG laser welding system (sometimes referred to as a welding microscope or workstation). 2. Applications: Ideal for precision welding, micro-welding, and repairing, often used on mold tools. 3. Key Features: Offers high-precision welding capability, often integrated with a microscope for detailed work. 4. Manufacturer: Laservall (Italy). 5. Model Variants: Units often feature 2004 or 2009 manufacturing dates in second-hand markets. It is important to differentiate the KUBO 100 welding system from similar names, as some listings in industrial marketplaces may confuse it with a "tempering unit" or cooling accessory, but the primary identification is as a specialized welding

Year of construction: 1998, condition: excellent (used), I sell the window tenoning profiling centre Weinig Unitec 10 Year 1998. Nodpfx Aisfzzhko Tjwn Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 3 pcs. available. Condition very good !

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Nwjdsv Ivnzopfx Ai Ton Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: new, General information Year of manufacture: 2026 Reference number: 2 Weights Empty weight: 3.700 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 33-50ton Delivery terms: EXW Production country: KR Nwsdpfxjym Abvo Ai Tjn Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH40ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 33-50TON Weight: 3400 kg (without mounting cap) Working pressure: 250~ 270Bar Oil flow: 180-240 l/min Centrifugal Force : 1000kN Frequency: 2700 rpm Eccentric moment: 10 kgm AVH40ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile Drivers.AVH40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Diesel generator set YANMAR 3TNV76 - Three-phase synchronous AC generator - Three-phase power 9 kVA (7.2 kW) - Single-phase power 4.5 kVA – Water-cooled Nsds Adf Enepfx Ai Tjwn The MOSA GE 10 YSX model is a super-silenced generator set with a 55-liter fuel tank for 30.5 hours of continuous operation. The unit is equipped with a roll bar, lifting hook, forklift entry, and fuel tank, and thanks to the enclosure, the noise level is minimal. Weighing only 535 kg, the generator set is compact and easy to transport thanks to its dedicated manual chassis, approved road chassis, or the special "tow hitch." To emphasize the attention to detail, the rounded edges of the protective housing are also important, as they allow rainwater to drain off more effectively. The base of the unit must ensure the containment of any liquids present in the engine and fuel tank in the event of leaks, to prevent dispersion into the environment. When the Compound system of the output voltage regulator is connected to the AVR, the latter is replaced by the Compound system if a short-term current exceeding the nominal value is required (e.g., engine start). The dual regulation system is capable of operating with either the Compound or just the AVR, thus offering a higher level of reliability in the event of a failure of either system. The generator set is designed to be connected to the EAS automatic start control panel, enabling the unit to be used as an emergency generator in the event of a failure of the main power supply of the available power grid. A TCM remote control allows the engine to be started/stopped from a distance of up to 10 meters from the unit. Suitable for a wide range of applications, including industrial plants, residential sites, hospitals, events, large construction sites, noise-sensitive environments, and as an emergency power generator. Complies with CE directives. INFO - Combined voltage regulation: Electronic AVR + Compound - Sockets: 1x400V 16A 3P+N+T CEE - 2x230V 16A 2P+T SCHUKO - Emergency stop button - Waterproof base - Prepared for EAS emergency power automatic system GENERAL - IP rating: 44 - Dimensions: 1680x770x1190 mm - Weight (dry): 535 kg - Measured sound power level Lwa (sound pressure LpA): 83 dB(A) (58 dB(A) @ 7m) - Guaranteed sound power level Lwa (sound pressure LpA): 84 dB(A) (59 dB(A) @ 7m) Insulation class: H * Maximum net power PRP: 8.2 kW (11.1 HP) GENERAL DATA: Cos ?: 0.8 */: * The stated values also include all protruding parts. / Operation in enclosed spaces, taking into account Directive 2000/14/EC * Weight (dry): 535 kg Measured sound power level LWA (sound pressure LpA): 83 dB(A) (58 dB(A) @ 7m) Engine: Diesel 4-stroke, naturally aspirated, indirect injection, water-cooled Fuel tank capacity: 55 l * Dimensions LxWxH (mm): 1680x770x1190 mm *: * Maximum power (not overloadable) according to ISO 3046-1 Type: YANMAR 3TNV76 Running time (75% of PRP): 30.5 h Guaranteed sound power level LWA (sound pressure LpA): 84 dB(A) (59 dB(A) @ 7m) Fuel consumption (75% of PRP): 1.8 l/h A.C. GENERATOR - 50 Hz: Three-phase synchronous AC generator, self-excited, self-regulated, brushless Cylinders / Displacement: 3 / 1116 cm³ * Maximum net power stand-by: 9 kW (12.2 HP) *: * Specified powers according to ISO 85

Condition: excellent (used), Year of construction: 2000, Ref:11106 . 2000 Polar LW 1000-4 Pile Lift. B1 size mobile lift with steel plate base. Features:- Easy reach control panel Nodpoy Uybkjfx Ai Tswn Hydraulic drive Automatic lifting/lowering mechanism for continuous working at a constant correct height High CE safety standard. Specification: Capacity, Max: 1000 kg Pallet size, Max: 80 x 120 cm Platform, Max: 80 x 127 cm Lift stroke, Max: 85 cm Electrical req. : 3pH, 400V, 50Hz Floor space : W144 x D130 cm (with pallet).

Condition: new, CTF 10 Lighting Tower The perfect lighting tower for long-term illumination of medium to large work areas. The CTF 10 is a very compact model with the tallest mast in the product range: up to 22 units can be loaded onto a truck, and the 10-meter-high mast ensures the illumination of a significant area. The tallest model With its 10 meters in height, the CTF 10 is the tallest mast in the standard product range, ensuring the illumination of a very large area. Connectable model With the optional "Link Kit," the user can connect several CTF 10 lighting towers in series with a single power source, allowing a large area to be illuminated with low fuel consumption. Nwodj Adhldjpfx Ai Ton Zero emissions Since the CTF 10 is powered by an external power source, it represents the perfect solution when large areas need to be illuminated, but a low sound pressure level or low CO2 emissions are required. Access doors The new CTF 10 has three lockable doors for access to the interior, where documents and tools can be stored. Easy handling Now, the CTF 10 is equipped with a central lifting hook and forklift pockets for safe and trouble-free handling. Technical data Dimensions min. (L x W x H) 1150 x 1150 x 2552 mm Dimensions max. (L x W x H) 1903 x 1903 x 10000 mm Dry weight 392 kg Mast system Manual Mast rotation 340° Luminous flux 4 x 240 W Type of luminaire LED Total lumen 139200 Lm Illumination 3800 m2 Output socket (A/V/Hz) 16/220/50 – 16/240/60 Input socket (A/V/Hz) 16/220/50 – 16/240/60 Wind stability 80 km/h

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,800 kg, empty load weight: 4,800 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,700 mm, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1000TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. Nedpex Tg Etefx Ai Tewn 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,750 kg, empty load weight: 4,750 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1200 pile driver is a high-performance and heavy-duty machine designed for efficient and precise pile installation in a variety of construction applications. With its powerful hammer, extended mast height of 6.1 m, and adjustable settings, the MW1200 is ideal for solar farms, fencing, guardrails, and infrastructure projects. Nsdpsx Tg Dpofx Ai Tswn

Condition: used, Year of construction: 2022, Permissible total weight: 1,500 kg Payload approx. 1,150 kg Box dimensions: 2760x1500x350 mm Loading height approx. 575 mm Tires: 195/55 R10 AF Chassis: Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics, hollow profile construction, welded and completely hot-dip galvanized Support wheel: Reinforced, automatic support wheel for safely parking the loaded trailer, load capacity 500 kg, with maneuvering handle Load securing: 6 folding lashing rings, recessed into the floor frame profile, each with a load capacity of up to 600 daN, Dekra certified Nwedo Afkk Eopfx Ai Tjn Side panels: Aluminum hollow profile, anodized, foldable on all four sides, removable, with recessed locks, 4 pluggable steel corner posts for high load capacity Loading area: Made of multi-layer glued screen printing board, 18 mm, continuous without joints, slip-resistant and waterproof Electrical system: Lighting with 13-pole plug and reversing light WITHOUT side panel extensions! 1 Registration certificate part II 1 Flat cover 2760x1500mm, grey, with loose rubber cord and mounting material 2 Crossbar for flat cover, for mounting on the side panel 1 Net and cover strip, 4-sided, for mounting

Condition: used, SINGLE Industrial Chiller / Water Cooler / Chiller SINGLE SKA-10-W/STK Nwodpfxo Aay H Sj Ai Ten Cooling capacity 14.0 kW according to the nameplate Year of manufacture 2016 – Industrial chiller with touchscreen control Refrigerant converted to R452A For sale is a used industrial chiller from the manufacturer SINGLE Temperiertechnik GmbH, model SKA-10-W/STK. The chiller is suitable for cooling industrial equipment, machines, production systems, and process circuits. The unit features an integrated controller with a touchscreen interface. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: SKA-10-W/STK Type of equipment: Industrial chiller / Chiller Year of manufacture: 2016 Country of manufacture: Germany Cooling capacity according to the original nameplate: 14.0 kW Permissible temperature range TS according to the nameplate: -30 °C to +20 °C Refrigerant circuit: Current refrigerant according to specifications: R452A Original refrigerant: R507 Original filling quantity according to nameplate: 13.0 kg Current filling quantity after conversion: not confirmed The refrigeration system was converted to the refrigerant R452A. The original refrigerant specifications on the nameplate refer to the delivery condition with R507. The current filling quantity and the CO₂ equivalent must be confirmed separately after the conversion. Pressure specifications according to the original nameplate: Max. operating overpressure PS: 24 bar Setting pressure safety valve: 28 bar Test pressure PT: 27 bar Electrical data: Power connection: 400 V / 3~ / PE / 50 Hz Rated current: 41.7 A Apparent power: 28.8 kVA Control / Operation: Touchscreen interface Display for three temperature control circuits (TCU 1–3) Display of process and temperature data Setpoint and actual value display Supply and return temperature display Flow display Modbus configuration menu Profibus status displays Alarm and operating status display Equipment: Industrial chiller with refrigeration circuit Integrated touchscreen control Electrical main switch Hydraulic connection lines and pipe connections Overflow connection Drain connection with shut-off valve Housing with ventilation openings Closed industrial housing Castors Equipment as shown in the pictures Areas of application: Industrial cooling Process cooling Machine cooling Production systems Machine tools Plastics processing Test bench cooling Temperature control and cooling circuits General industrial cooling applications Dimensions / Transport: Dimensions (L × W × H): not yet determined Unladen weight according to the nameplate: 1,020 kg The exact external dimensions must be determined before shipment. The actual transport weight may vary depending on residual media, accessories, and packaging. Condition: Used Year of manufacture 2016 Refrigerant converted to R452A Optical condition as shown in the pictures Signs of use and some deposits on the connections. Scope of delivery: 1 × SINGLE SKA-10-W/STK industrial chiller Integrated touchscreen control Connections and equipment as shown in the pictures Scope of delivery otherwise as shown in the pictures. Shipping by freight forwarder possible upon request. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Step ladder, 10 steps, aluminum. Overall height 3000 mm, with clip-step R13 tread, GÜNZBURGER. · With clip-step R13 tread · Aluminum · One-sided access · Steps 80 mm deep · With certified, non-slip clip-step R13 tread, for use in Ladder angle: 20° Step spacing: 235 mm Working height up to approximately: 4500 mm Design: with clip-step R13 tread Ladder length: 3010 mm Njdpfxo Ac T Etj Ai Tswn Platform height: 2340 mm Material: Aluminum Weight: 15.1 kg Max. total load: 150 kg Steps including platform: 10

Condition: new, Step ladder, 10 steps, aluminum. Overall height 3000 mm, with ergo-pad grip zone, GÜNZBURGER. * Aluminum * One-sided access * Sturdy rectangular tube stiles Nodpfx As Ab U T Asi Town * 80 mm deep, ribbed steps and large platform * Step spacing 235 mm * 4-way crimped step/stile connection Design: one-sided access Material: Aluminum Platform height: 2340 mm Weight: 13.6 kg Ladder length: 3010 mm Ladder inclination: 20° Max. total load: 150 kg Step spacing: 235 mm Lower outer width: 680 mm Working height up to approx.: 4500 mm Steps incl. platform: 10