Used Multi V Lower Tooling 75 X 75 X 3100 Mm for sale (112,662)

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Pjdozc Iztjpfx Airogt Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Pgodozc Izgopfx Airot Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm Pjdpezc Iypjfx Airogt V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2005, machine/vehicle number: 05/460/013, functionality: fully functional, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, stroke length: 265 mm, operating speed: 200 mm/s, overall weight: 18,000 kg, Equipment: CE marking, For sale: Betzeler 3200 KN x 3100 MM machine – Hydraulic bending press Manufacturer: Beyeler GmbH, Mühlhäuser Strasse 3, D-99867 Gotha Machine type: PR 3200 kN x 3100 mm Serial number: 05/460/013 Year of manufacture: 2005 Machine weight: 18,000 kg Electrical data Voltage: 400 V Power: 30 kW Frequency: 50 Hz Phases: 3∼ Max. fuse rating: 80 AT Hydraulic/pneumatic data Podpfx Aiszm S Ttsregt Max. air pressure: 8 bar Technical data (press brake) Force: 3200 kN Max. stroke: 265 mm Max. closing speed: 200 mm/s Pressing speed: 1–10 mm/s Max. O.A. response time: 90 ms Min. ESPE safety distance: 290 mm

Condition: new, Year of construction: 2025, diameter 28 mm length 75 mm clamping range 70-75 mm Podpfxsuia Ngs Airegt The price is exclusive of statutory VAT. Also available in D28 x 50 mm (clamping range 45–50 mm). Clamping range: 70–75 mm Type: Ball Lock Pin 75 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF's ball lock pins are specialized fastening elements designed for integration into various welding table systems and setups. Their primary function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers featuring 28 mm bore holes. The unique ball-lock design enables flexible alignment of workpieces at different angles and positions. Thanks to high-quality craftsmanship and robust construction, GERD WOLFF's ball lock pins provide reliable holding force throughout the entire welding process. These pins ensure easy handling, quick clamping, and release of workpieces — no additional tools required. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the demanding requirements of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons Pgjdpfx Aioyxvgqjret The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical Details: Pgsdpfexyvx Tsx Airot Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Pgodpfx Aeru Un Hsirst Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 1987, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Pgedpfeyy Tqcsx Airjt Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, functionality: fully functional, Year of construction: 2026, CIDAN PRO folding machine is our most versatile machine yet. From the integrated back gauge, allowing complex parts production from the folding side, to the Combi beam with its high divided tools and straight rail, the CIDAN PRO folding machine takes many of our additional options and makes them standard. With its 100% duty cycle of forming 4 mm at 3100 mm, this fully upgraded metal folder makes it possible to replace two operators with one and still produce accurate parts up to four times faster than with a press brake. -Dual drive of clamping beam gives incredible speed and accuracy. The turbo drive also increases hemming capacity to 50 tons (55US). Pjdpemdqycjfx Airsgt -Combi beam with high divided tools and straight rail in combination with segmented tools in the lower beam and folding beam can facilitate extremely complicated folding work. -Automatic folding beam crowning and automatic sheet thickness adjustment for precise folding. - With high speed and extreme accuracy of the back gauge, exact measuring is ensured and with turbo driven folding beam you will get the right folding angle every time. - Height adjustable back gauge table a as standard.

Condition: used, Max. Cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motor rear stop with digital display Manual cutting gap adjustment Variable cutting length Cutting edge lighting New blades Pedpfjw I Tu Nox Airjgt Very good condition

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery Podpfx Aepag Tdjiregt - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Pjdpfx Aieymm D Isrjgt Working length: 3100 mm Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: used, Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth Tailstock CM5 Lubricant tank Psdjzwfdmepfx Airegt Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Podpfjya Iaqjx Airogt Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine Pgsdpfx Asydi A Isirst -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Pgsdpfx Aiowg Tmdsrst Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 – 10 complete with pneumatic sheet support at the rear. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC BLADE GAP ADJUSTMENT Cutting capacity for 450N/mm2 material: 10 mm Cutting capacity for 700N/mm2 material: 6 mm Cutting length: 3100 mm Distance between uprights: 3600 mm Variable cutting angle: 0.5 - 3° Sheet clamping cylinders: 14 Strokes per minute: 7 – 13 Throat: 250 mm Motor power: 22 kW Psdpfxjfh R Ilo Airsgt Graduated square and two sheet supports: 1000 mm Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 10.5 tons

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm dayligth 410 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping Pedpfx Aexzuwkeirsgt - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die Pedpfjiqhh Djx Airsgt -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Condition: excellent (used), strip width: max. 1.750 mm strip thickness: 0,4 - 3 mm cross cut swivelling range: +/- 34° Pgedsy Nyugjpfx Airst coil weight: max. 25 t Coil OD: max. 2.000 mm mandrel Ø: 508 mm year: 1971/2004/2020/2023

Condition: new, Hydraulic shear MVD 3100 X 6 mm complete with pneumatic sheet support at the rear Cutting capacity for 450N/mm2 material: 6 mm Cutting capacity for 700N/mm2 material: 4 mm Cutting length: 3100 mm Distance between uprights: 3330 mm Fixed cutting angle: 1.9° Pgjdpfx Aiefh R Igsret Sheet clamping cylinders: 14 Strokes per minute: 18–23 Throat: 250 mm Motor power: 10 kW Graduated square and two sheet supports: 1000 mm Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 6000 kg

Condition: used, functionality: fully functional, Year of construction: 1990, Technical data: Max. sheet width 3,000 mm Max. Sheet thickness at max. yield strength 240 N/mm² when bending to max. sheet width 35 mm when rounding Bending length 2.2 x S Max. Passage between the rolls 145 mm Roll diameter top roll 552 mm Bottom roller 532.4 mm Side rollers 400 mm Number of rollers 4 Driven rollers 2 top and bottom rollers Hydraulic drive of the rollers Podpfxsu R D Dtj Airjgt Rollers arranged symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Hydraulic adjustment of the rollers Adjustment speed of bottom roller 0-200 mm/min. Side rollers 0-700 mm/min. Pneumatic roller brake Actuation of the hinged bearing hydraulic Operating voltage 3 x 380 V / 50 Hz Display device for roller positions 4 x optical/analog Weight of the machine approx. 42 tons Area 2.71 x 6.4 m Height 3.12 m Additional equipment: - Conical bending shoe - Top support device - Interchangeable roller 440 mm The machine has been extensively overhauled and is in very good condition.

Condition: excellent (used), Transport scooters, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailer tires, stroller wheels -Tyres: outside Ø 250 mm - Tread: plastic (hollow) -Rim: Inner Ø 13 mm - Quantity: 162 pieces Podjv Tm Tlopfx Airjgt -Price per piece - Minimum purchase: 4 pieces -Dimension: Ø 250 x 75 mm -Weight: 0.8kg/pcs

Year of construction: 1999, condition: good (used), Specification: Adjustable bed 2 foil pulls Variable Accel / Decel and delay pull pulse – to provide accurate foil pull and prevent preheating of foil. Pgedpfjhy N Uhsx Airst Foil Countdown in metres – this system will provide a warning that a foil change is required and is controlled via the touchscreen. Electronic front and sidelay sensors Auto impression Preloader Machine has been completely built by Starfoil. Condition as is.