Used Mut 360/400-1150 for sale (22,220)

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Iiodpfx Abeiryyajmof Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: excellent (used), For sale: a three-phase motor with a brake, model SEW-Eurodrive RF32DT80K4BMG/HF/TF. The unit is 100% functional, tested, and ready for operation. Before sale, the motor was thoroughly inspected and operates flawlessly. The housing shows normal signs of use and some localized paint chipping, as shown in the pictures. These do not affect the proper operation or technical parameters of the device. Technical data: Manufacturer: SEW-Eurodrive Type: RF32DT80K4BMG/HF/TF Power: 0.55 kW Supply: 3×230/400 V AC, 50 Hz Rotational speed: 1360 rpm Motor torque: 10 Nm Gearbox: RF32 Electromagnetic brake: 230 V AC Rated current: 3.05 A (230 V Δ) / 1.76 A (400 V Y) Iiedpfx Abozna Tkemef Power factor (cos φ): 0.77 Protection class: IP54 Insulation class: H Operating mode: S1 Weight: 18.57 kg

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Iisdpfx Ajyma Dbobmef Specifications: Capacity: 14.1 ft³ Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Length: 66.14" Jacket: No

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,500 kg, Accessories Condition: New Ijdpfx Aozd H Nqobmjif Technical Condition: New Description: Manitou 180° Swivel Fork Carrier – More flexibility on every construction site. Welcome to today's product highlight: the Manitou 180° Swivel Fork Carrier. This intelligent attachment significantly expands the application possibilities of your Manitou telehandler and ensures maximum efficiency in handling pallets and long materials. The swivel fork carrier enables a 90-degree rotation to the left and 90 degrees to the right. This allows loads to be positioned precisely without constantly having to realign the machine. This is especially beneficial on tight construction sites, between buildings, or in hard-to-reach areas, as it saves valuable time and increases safety. Whether it's sandwich panels, drywall, wood, or steel structures – long loads can be easily transported lengthwise and placed exactly where they are needed. Even pallets that are not optimally aligned can be easily corrected. Another advantage: positioning materials through window openings or narrow passages becomes significantly easier. The driver does not have to constantly move the machine but can align the load directly using the rotating function of the fork carrier. This saves travel distances, reduces fuel consumption, and increases productivity on the construction site. With a load capacity of up to 1,500 kilograms, the Manitou Swivel Fork Carrier is suitable for most daily material transport tasks on construction sites and in industrial applications. Typical applications include roofing and facade work with sandwich panels, drywall construction, wood and steel construction, and all applications where long or bulky loads need to be moved safely. The Manitou 180° Swivel Fork Carrier offers a perfect combination of flexibility, precision, and productivity. Less maneuvering, faster workflows, and more efficient material logistics make it an indispensable tool for modern construction sites.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: AN970109, For sale is a professional arc spraying system (Twin Wire Arc Spray / Arc Spray) consisting of a Praxair PF400 Arc Spray Feeder in combination with a powerful ESAB 360 CV constant voltage power source on a mobile system cart. Isdpfx Abezqn A Somsif The system is used for thermal metal spraying and is suitable for the production of high-quality wear, corrosion, and repair coatings on metallic components. Such systems are used, among other applications, in mechanical engineering, maintenance, power plants, steel construction, and surface technology. Equipment: Praxair PF400 Arc Spray Feeder (wire feeder) ESAB 360 CV constant voltage power source Mobile cart with wire spool holder Connection and control cables Hose set Scope as shown in the pictures Technical data: Praxair PF400 Professional wire feeder for arc spraying systems Suitable for Twin Wire Arc Spray (TWAS) Precise wire feed for high-quality coatings ESAB 360 CV Constant voltage power source (CV) Mains connection: 3~ 220/400 V, 50 Hz Welding/spraying current: up to 450 A Duty cycle: 450 A at 60 % 350 A at 100 % Protection class: IP21 Condition: Used Optically in accordance with its age, with normal signs of wear. Sold as pictured. Application areas: Thermal arc spraying (Arc Spray) Wear protection coatings Corrosion protection Repair and refurbishment of shafts, bearing seats and machine components Metallization of steel structures 2 units available Inspection and collection are possible by arrangement.

Condition: good (used), Clamping table, clamping angle, T-slot table, milling machine table for shaping machine, shaping machine, high-speed planer, broaching machine, slotting machine, slotting machine, slotting tool, broaching machine, shaping machine, horizontal shaping machine, planing machine, Schepping -T-slot plate: Mounting plate with adjustable angle of inclination Isdpfxoiaql To Abmeif -Groove width: 20 mm -Slot spacing: 105 mm -Overall dimensions: 640/400/H360 mm -Weight: 103 kg

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Iedpfx Ajxf Uxcobmsif

Condition: ready for operation (used), functionality: fully functional, shelf height: 4,000 mm, Nedcon frames – approx. 400 x 110 cm | inspected & used These Nedcon frames, measuring approximately 400 x 110 cm, come from our inspected used stock and are available immediately from our warehouse. They are ideally suited for expanding existing Nedcon pallet racking and heavy-duty shelving systems. Thanks to their robust construction, the frames can be reliably used in daily warehouse operations. We can also offer suitable crossbars upon request. Data: Height: 400 cm Depth: 110 cm Color: Blue Shelving system: Nedcon Used, in stock, available for immediate delivery -- MULTIPLE UNITS AVAILABLE IMMEDIATELY -- Iijdszuxkzopfx Abmsf Price: Negotiable You will receive an invoice with VAT shown. STILL HAVEN'T FOUND WHAT YOU'RE LOOKING FOR? Visit our website, where you'll find a quick overview of many offers and variations of the articles! Transport: Delivery can be arranged through our partner shipping company, if desired; the costs depend on the postal code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment, if required. Our recommendation: Let us know your requirements... We will gladly help you with the implementation of your projects, from planning to ordering to installation. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, from 08:00 to 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), Siemens 1FT6082-8AF71-2AH2 synchronous servo motor SN:YFJ960113604001, used, normal signs of use, 100% functional, scope of delivery as per photos Iiedsvl Uk Aepfx Abmjf

Condition: excellent (used), CATALOG NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations) Ijdpfx Abozulzmemsif

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,207 h, load capacity: 14,000 kg, lifting height: 3,600 mm, free lift: 1,750 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,000 mm, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 400/60-15, rear tire type: superelastic tires (black), rear tire size: 465/55-20, overall weight: 30,000 kg, empty load weight: 16,000 kg, total height: 2,950 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are experts in the field! 🔧 Iiodpfjzufkhsx Abmjf We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! In this listing, we present: 🔥 COMBILIFT C14000 – DUPLEX 3600mm – Year: 2019 – 4207 HOURS – GAS – FREE LIFT – POSITIONER – 1500MM FORKS – Condition: 5/5 🔥 The forklift is in excellent technical condition, fully inspected and ready for immediate operation. 🛠️💨 🔍 Key Features and Technical Data: Model: COMBILIFT C14000 Year of Manufacture: 06/2019 Load Capacity: 14,000 kg Operating Hours: 4207 h Mast Type: Duplex Lift Height: 3600 mm Drive Type: GAS Load Center: 600 mm Engine Manufacturer: G.M. Total Weight: 16,000 kg Tyres: Solid, superelastic, in very good condition Front Tyres: Superelastic – 400/60-15 – 100% TREAD Rear Tyre: Superelastic – 465/55-20 – 100% TREAD Overall Height (mast lowered): 3150 mm Fork Length: 1500 mm Free Lift Height: 1750 mm Overall Height (structure): 2950 mm Overall Length: 3000 mm Overall Width: 3300 mm Positioner Width: 2000 mm Technical Condition: Fault-free, after full service Visual Condition: Very good ✅ 📞 Contact us today and get a powerful machine that will work hard for your business!

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm Iodpfx Abozrug Tsmoif - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal pressure rollers - Pawls - Saw shaft - Smooth pressure roller - Pawls - Smooth pressure roller From below: - 2 metal, toothed feed rollers - Pawls - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter - Main motors 2x55 kW Iisdpszrmn Aofx Abmsf - Feed motor 4 kW - Hydraulic lifting of the top/bottom frame - Hydraulic adjustment of saw shafts - Pump motor 0.37 kW - Central lubrication - Suction connector diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight approx. 5500 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-blade saw, in very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change with significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,207 h, load capacity: 14,000 kg, lifting height: 3,600 mm, free lift: 1,750 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,000 mm, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 400/60-15, rear tire type: superelastic tires (black), rear tire size: 465/55-20, overall weight: 30,000 kg, empty load weight: 16,000 kg, total height: 2,950 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are experts in the field! 🔧 We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! In this listing, we present: 🔥 COMBILIFT C14000 – DUPLEX 3600mm – Year: 2019 – 4207 HOURS – GAS – FREE LIFT – POSITIONER – 1500MM FORKS – Condition: 5/5 🔥 The forklift is in excellent technical condition, fully inspected and ready for immediate operation. 🛠️💨 🔍 Key Features and Technical Data: Iiodpoztkdkjfx Abmsf Model: COMBILIFT C14000 Year of Manufacture: 06/2019 Load Capacity: 14,000 kg Operating Hours: 4207 h Mast Type: Duplex Lift Height: 3600 mm Drive Type: GAS Load Center: 600 mm Engine Manufacturer: G.M. Total Weight: 16,000 kg Tyres: Solid, superelastic, in very good condition Front Tyres: Superelastic – 400/60-15 – 100% TREAD Rear Tyre: Superelastic – 465/55-20 – 100% TREAD Overall Height (mast lowered): 3150 mm Fork Length: 1500 mm Free Lift Height: 1750 mm Overall Height (structure): 2950 mm Overall Length: 3000 mm Overall Width: 3300 mm Positioner Width: 2000 mm Technical Condition: Fault-free, after full service Visual Condition: Very good ✅ 📞 Contact us today and get a powerful machine that will work hard for your business!

Condition: used, Year of construction: 2002, SEW Movitrac Frequenzumrichter 31C011-503-4-00 Iiodsk Abqqspfx Abmof RA1284 Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: excellent (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,900 mm, total width: 700 mm, total height: 1,000 mm, overall weight: 750 kg, SAC FS 400 Planer | 4-knife surface planer! Excellent condition! SAC FS 400 Planer | 4-knife surface planer! EXCELLENT CONDITION! Machine from an Italian manufacturer. TECHNICAL SPECIFICATIONS: - Table length 2900 mm - Working width 430 mm - 4 traditional knives - 3kW motor - Shaft rpm 5000 - Shaft diameter 120mm - Both tables are adjustable - Stable, solid fence - Shaft damping system Machine dimensions: - Length 290 cm - Width 70 cm - Height 100 cm - Weight 750 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Ijdozqlqmjpfx Abmsif jbsmaszyny.pl

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. Iiodpfx Abjzpbufsmsf The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,207 h, load capacity: 14,000 kg, lifting height: 3,600 mm, free lift: 1,750 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,000 mm, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 400/60-15, rear tire type: superelastic tires (black), rear tire size: 465/55-20, overall weight: 30,000 kg, empty load weight: 16,000 kg, total height: 2,950 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 Looking for a reliable forklift? We are experts in the field! 🔧 We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! In this listing, we present: 🔥 COMBILIFT C14000 – DUPLEX 3600mm – Year: 2019 – 4207 HOURS – GAS – FREE LIFT – POSITIONER – 1500MM FORKS – Condition: 5/5 🔥 The forklift is in excellent technical condition, fully inspected and ready for immediate operation. 🛠️💨 🔍 Key Features and Technical Data: Model: COMBILIFT C14000 Year of Manufacture: 06/2019 Load Capacity: 14,000 kg Operating Hours: 4207 h Mast Type: Duplex Lift Height: 3600 mm Drive Type: GAS Load Center: 600 mm Engine Manufacturer: G.M. Total Weight: 16,000 kg Tyres: Solid, superelastic, in very good condition Front Tyres: Superelastic – 400/60-15 – 100% TREAD Rear Tyre: Superelastic – 465/55-20 – 100% TREAD Overall Height (mast lowered): 3150 mm Fork Length: 1500 mm Free Lift Height: 1750 mm Iiedpfszphx Dsx Abmjf Overall Height (structure): 2950 mm Overall Length: 3000 mm Overall Width: 3300 mm Positioner Width: 2000 mm Technical Condition: Fault-free, after full service Visual Condition: Very good ✅ 📞 Contact us today and get a powerful machine that will work hard for your business!

Condition: new, For sale is a new, unused three-phase electric motor, LOHER ANGA-355LB-04A, with a power rating of 270 kW. The motor comes from warehouse stock (NOS – New Old Stock). It has never been installed or used. Its technical and visual condition is very good, with only minor signs of storage. Manufactured in Germany, it features a robust, industrial design. It is ideally suited for driving pumps, fans, compressors, crushers, conveyors, and other industrial machines. Technical specifications: Manufacturer: LOHER Model: ANGA-355LB-04A Power: 270 kW Rotational speed: 1490 rpm Frequency: 50 Hz Voltage: 400/690 V (Δ/Y) Voltage range: 380–420 V Δ / 655–725 V Y Power factor (cos φ): 0.85 Isdpfx Abjzn Awxjmjif Protection class: IP55 Insulation class: F Mounting design: IM B3 Standard: EN 60034 / IEC 38 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE WF30DT63L4 geared motor with a 0.25 kW three-phase electric motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. It shows normal signs of wear and tear resulting from use. The robust SEW-EURODRIVE gearbox ensures reliable operation and is ideal for conveyors, feeders, packaging machines, production lines, and other industrial applications. Technical specifications: Isdpfoznw Ewsx Abmeif Manufacturer: SEW-EURODRIVE Type: WF30DT63L4 Motor power: 0.25 kW Power supply: 3× 230Δ / 400Y V Motor speed: 1300 rpm Output speed: 47 rpm Torque: 33 Nm Duty cycle: S1 Current: 1.19 / 0.68 A Frequency: 50 Hz Power factor: cos φ 0.81 Protection class: IP54 Insulation class: B Design: IM B5A Weight: 10.63 kg Lubrication: synthetic oil SEW PG460 Country of manufacture: Germany

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 Manual transmission Tridem 4th axle is steering axle and lift axle Wheelbase 3.80m Iodpfxordd Alo Abmjif Length of loading area: 6.80m Technically in good working order and ready to drive

Condition: excellent (used), For sale: SEW-EURODRIVE WF20 DT63L4/B03/Z geared motor with a three-phase motor rated at 0.25 kW and a 400 V AC electromagnetic brake. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is very good, with normal signs of use. The robust worm gear ensures quiet operation and high torque, making this geared motor ideal for conveyors, feeders, production machines, and other industrial applications. Iedpfeznnrhsx Abmjif Technical data: Manufacturer: SEW-EURODRIVE Model: WF20 DT63L4/B03/Z Power: 0.25 kW Output speed: 47 rpm Torque: 34 Nm Gear ratio: 27.50:1 Power supply: 230/400 V, 50 Hz Protection class: IP54 Insulation class: F Brake: 400 V AC, 3.2 Nm Weight: 11.09 kg Country of manufacture: Germany

Condition: excellent (used), For sale is an SEW-EURODRIVE SPIROPLAN WA20DT71D4 geared motor with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear from use. The power cable, as shown in the pictures, is included. Thanks to its compact design, the geared motor is ideally suited for driving conveyors, production machines, packaging machines, feeders, and many other industrial devices. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: WA20 Motor type: DT71D4 Complete type: WA20DT71D4 Power: 0.37 kW Supply: 230/400 V Δ/Y Frequency: 50 Hz Motor speed: 1380 rpm Output speed: 71 rpm Gear ratio: i = 19.44 Torque: 36 Nm Rated current: 2.15/1.24 A Protection class: IP54 Insulation class: B Operating mode: S1 Iodsznlb Hjpfx Abmsif Design: Universal Weight: 8.685 kg Country of origin: Germany

Condition: excellent (used), For sale: Mannesmann Dematic AG SFV20UD MNA 80 B4 geared motor with a 0.75 kW three-phase electric motor. Iiodpfx Absznd Ufomsf The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear resulting from operation are visible. Thanks to its robust construction and high torque, the geared motor is ideally suited for driving conveyors, feeders, production machinery, transport equipment, and other industrial applications. Technical data: Manufacturer: Mannesmann Dematic AG Type: SFV20UD MNA 80 B4 Design: IM B5.6 Power: 0.75 kW Motor speed: 1380 rpm Output torque: 62 Nm Supply voltage: 230 V Δ / 400 V Y Frequency: 50 Hz Rated current: 3.60 / 2.10 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Operating mode: S1 (continuous duty) Weight: 13 kg Gearbox lubrication: mineral CLP oil Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE R40DT71C2BMG/Z geared motor with a three-phase electric motor and integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good – normal signs of use resulting from operation are visible. This robust geared motor is ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: SEW-EURODRIVE Type: R40DT71C2BMG/Z Motor power: 0.37 kW Motor speed: 2700 rpm Output speed: 43 rpm Power supply: 230 V Δ / 400 V Y Frequency: 50 Hz Iijdoznd Niopfx Abmjf Current: 1.65 / 0.96 A Cos φ: 0.91 Protection class: IP54 Insulation class: F Brake: 400 V AC Brake torque: 2.5 Nm Mounting position: IM B8 Weight: 19.24 kg Gear lubrication: Mineral oil CLP220 Country of manufacture: Germany