Used Mwm/Piller Nktb 4-1158 for sale (57,839)

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Transport dimensions: 6 loading meters -Total weight: 8600 kg Fodsivql Iopfx Ad Nsgb

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, overall weight: 46,700 kg, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, MWM Deutz TBG 441 CV16, including BHKW generator, dual fuel (gas, diesel), year 1993, 7 units available, generator AVK 6600V 173A 50Hz, control system, load switchgear cabinets, chimneys, heat recovery boilers, pumps, transformers, etc. Complete dismantling of the power plant. Fjdpfx Asy Hmhbjd Nsgb

Condition: excellent (used), functionality: fully functional, fuel type: diesel, output voltage: 10,000 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 6,750 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Deutz MWM, 5 units of power generator (power plant), total output: 6750 kVA. Completely overhauled in 2017, equipped with a new control system and advanced central management. The units were in use until 2025 as emergency backup power supply for a large data center and have always been maintained to the latest technical standards, with comprehensive servicing and upkeep. The system is in excellent condition. Engine: Deutz MWM TBD604 BV12, 200 operating hours, year built 1994. Generator: Siemens 1FC7 567, 10,000V, 50Hz, 78A, 1350 kVA. Generator control: DEIF, genset control, new version year 2016/17. Central management: DEIF, load management, synchronization, fuel management, etc., year 2017. 10kV circuit breaker: Siemens. Accessories: silencers, radiators, pumps, etc. Fgsdpfx Aoyzb R Tjd Nsb

Condition: good (used), Year of construction: 1980, Diesel emergency generator MWM Mercedes - AEG built in 1980 with switch cabinet, cooler. Diesel engine MWM 8 cylinder 405 HP Generator AEG Type:SIRI 100 D/4 330KVA . Fgjdpfxet In Nyj Ad Nob

Condition: used, High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.37 kW -Performance data: not available -Connection input: Ø 65 mm -Connection output: Ø 60 mm Fedpfxochaygs Ad Nogb -Dimensions: 510/480/H470 mm -Weight: 49 kg

Condition: as good as new (ex-display), Piller Apotrans II 200A-4 pol. Static-Transfer-Switch Fgodpfoigl N Ejx Ad Nob

Condition: ready for operation (used), MWM GFF-N-60 A/A 69.50.060.01 DC motor 24Vdc, serial number 514, used, good condition, 100% functional, delivery as shown in photos. Fsdpfoww Ru Hox Ad Nogb

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 1~60g; volume per weighing head: 0.3L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 90 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fgsdpfx Ajv Nnbced Nsb

Year of construction: 2025, condition: new, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(70-270)xW(70-270)mm, (double film pulling possible for longer bags); suitable film width: 160-560mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Fsdpsv Nnb Ajfx Ad Nogb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 85 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fgjdpsv Nnbpjfx Ad Neb

Condition: excellent (used), functionality: fully functional, Machine Data Machine Type: Vertical Slotting Machine Manufacturer: WMW MEUSELWITZ Model: STSR 400 Year of Manufacture: 1970 Control Type: Conventional Country of Origin: Germany Technical Specifications Max. Ram Stroke: 450 mm Work Table Diameter: 800 mm Min. Ram Stroke: 65 mm Max. Workpiece Height: 600 mm Ram Adjustment: 600 mm Ram Strokes per Minute: 18; 22; 28; 35; 45; 56 Ram Head Adjustment: +/- 15° mm Table Cross Travel: 800 mm Table Longitudinal Travel: 1000 mm Table Rotation: 360° Table Feed per Stroke: 0.14 - 0.22 - 0.35 - 0.56 - 0.9 - 1.4 mm/stroke Total Connected Load: 7.8 kW Machine Weight (approx.): 6.25 t Machine Dimensions (LxWxH approx.): 2.8 x 1.9 x 3.0 m Additional Information Further Features: Ram: - Tool holder adjustable up to 900 mm reach - Bed overhang = 700 mm - 3-jaw chuck Rapid traverse for both axes as well as rotary table Accessories are to be sold separately (see photo). Storage and Delivery Conditions Fodpfx Aey Rh Iqjd Njgb Shipping Terms: Ex location, without dismantling and unpacked Storage Location: Rostock Availability: Immediately Subject to technical modifications, errors and prior sale.

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Precision surface grinding machine Possible surface grinding operations: Fsdsx Afpaopfx Ad Njgb -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *

Condition: used, functionality: unexamined, workpiece weight (max.): 5,000 kg, Two-column coordinate boring machine CNC Manufacturer: Mikromat WMW Type: CBKoZ 1400x2240/2 Control: Siemens 840D (installed approx. 1997) Space required: 7000 x 6500 x 5300 mm (LxWxH) Weight: 22,500 kg incl. - tool holders shown - extensive documentation. For further information, see attachments. The machine can be tested/demonstrated on site under power. Freight basis: From location, without dismantling The buyer must dismantle and load the machine himself. A 10-ton bridge crane is available for this purpose, which was also used to assemble the machine at the time. Fgsdoxyq Hxopfx Ad Nsb Further assistance and the use of a forklift truck may be possible by arrangement. All information without guarantee. Subject to prior sale. The object of purchase is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duties by the seller or for any injury to life, body or health.

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: Fgsdpfx Aov A S Efjd Neb a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Fedpfxjhv S Ezj Ad Nsgb -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing -Individual components: see photos -Dimensions: 280/270/H450 mm -Total weight: 9.8 kg

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Fgedpjgy E Dpjfx Ad Neb Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Fgsdpfoif Upfox Ad Nsb Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Fgodpfjy Ixgxox Ad Nsb Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : Fgsdpfey Iw Emjx Ad Nsb The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Fodpfx Adey Iwzno Nsgb Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, power: 2 kW (2.72 HP), filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Fgjdeyma Tiopfx Ad Nob Hopper opening: length x width 1250 x 1000 mm Length x width: 1250 x 1000 mm Cutting unit opening: 562 x 462 mm Feed opening: 1250 x 1000 mm Length x width: 562 x 462 mm Number of shafts: 4 pcs of which: cutting shafts 2 pcs cleaning shafts 2 pcs Number of cutting discs: 23 Shaft speed: 25 rpm.

Condition: excellent (used), Professional paper drilling machine from the renowned German manufacturer Constantin Hang Maschinenfabrik Göppingen. Model 114-4 is equipped with four drilling heads designed for precise drilling of paper, documents, catalogs, calendars, and print materials. Fgsdpfx Ajy Nm A Red Njb The machine is suitable for use in: • printing houses, • bookbinding shops, • print production facilities, • binder and catalog manufacturing, • technical documentation preparation. Robust German engineering guarantees high working precision and long-term durability. Technical specifications: • Manufacturer: Constantin Hang Maschinenfabrik • Model: 114-4 • Number of heads: 4 • Adjustable head distance • Adjustable worktable • Foot pedal operation • Safety guard • Made in Germany

Condition: like new (used), Year of construction: 2019, operating hours: 10,800 h, For sale: complete containerized CHP (Combined Heat and Power) unit. Dimensions: 17x3x3.5 m (LxWxH). Equipped with MWM gas generator. Brand: MWM. Model: 2020 V20. Year of manufacture: 2019. Power output: 2000 kW. Voltage: 400 V. Operating hours: 10,800. In mint condition, ready for immediate use. Fitted with emergency cooler and exhaust heat exchanger. Fodpfx Aoy Him Tod Nsgb

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 Fgodpfsyga T Nox Ad Nob • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Fgjdsw R St Njpfx Ad Nob