Used Neptronic Skge 3170-2Nc for sale (61)

Condition: excellent (used), functionality: fully functional, Humidifier installation This system was used in an office building. A total of 3 of these units are available. Length: 1,570 mm Bjdpfxoy Alr Ro Afwedg Width: 570 mm Height: 1,530 mm The listed price is per unit.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm Bjdpfxsy Nb Tko Afwjdg For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: used, Year of construction: 2008, operating hours: 14,357 h, power: 129 kW (175.39 HP), gearing type: other, maximum speed: 80 km/h, first registration: 03/2008, color: orange, overall weight: 12,000 kg, mileage: 14,358 km, empty load weight: 7,277 kg, maximum load weight: 4,723 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, trailer coupling, * German vehicle * 1st owner * Condition, see photos * Mulag verge mower head RMK1200 * Working width: 1,200 mm * Mounted on Mulag boom MRS300 * Reach: 3.00 meters * Drive via PTO shaft * Mulag rear boom MHS800 * Lateral displacement: 1,600 mm * Reach right & left: 8.70 meters * with Mulag mower head MK1200 * Working width: 1.20 meters * Municipal hydraulics & rear hydraulics * Rear power lift * Height-adjustable trailer hitch * Trailer load: 32,845 kg * Comfort cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfort driver's air suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * Rotating beacon lights * Distance warning lights * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false expectations regarding the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors. Bdsdpfexiyqfjx Afwjg

Condition: used, Year of construction: 2008, Transnorm roller conveyor 3170-900-850 RA2151 Make: Transnorm Roller width (RB): 850 mm Nominal/outer width (NB): 700 mm Length: 3170 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gearmotor R17 DT71D4/TH Eletrical Data: 380-500 V, 0,37 kW Conveying speed (v m/s): 0,2 Height frame: 140 mm including Motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Bjderg Nz Hepfx Afwjdg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm Bsdpfoyrtzkjx Afwsdg > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm ...

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Welding table: clamping plate with T-slots on a solid base frame with vice -Bottom: with cooling fins -Table surface: 2010 x 650 mm -Groove width: 19 mm -Groove spacing: 130 mm -Overall dimensions: 3170/860/H1060 mm Bdodpfeliugmox Afwjg -Weight: 880 kg

Year of construction: 2018, condition: good (used), heating cooling device HB Therm 160 Z2 Serie 5 Water, 160°C 17 KW year: 2017-2018 price: 5.950 € Bdjdpfok Tapwex Afwjg contact: Mr. Rainer Eckerle

Condition: used, functionality: fully functional, mileage: 140,541 km, power: 114 kW (155.00 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 3,170 kg, maximum load weight: 1,510 kg, overall weight: 4,690 kg, axle configuration: 4x2, next inspection (TÜV): 06/2027, fuel: diesel, color: silver, driver cabin: other, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 7, total length: 6,400 mm, total width: 2,300 mm, total height: 2,890 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,300 kg, loading space length: 2,300 mm, loading space width: 2,100 mm, loading space height: 1,800 mm, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, soot filter, trailer coupling, truck registration, Ford Transit tipper truck with tarpaulin and drop-side body Double cab with 7 seats Vehicle from first owner Formerly a municipal/government vehicle Low-emission Euro 5 Green environmental badge 6-speed manual transmission Air conditioning Auxiliary heater Electric windows Electric exterior mirrors Power steering Central locking with remote control Driver and passenger airbags Bdodpfxozkmmcs Afwog Radio with Bluetooth hands-free system Multi-function steering wheel Trailer coupling, 2,800 kg towing capacity Raised front and side panels Lashing points on the loading area Large tool cabinet behind the cab Small tool box under the loading area Twin-tire rear axle Yellow LED rotating beacon Payload 1510 kg Unladen weight 3170 kg Permissible total weight 4690 kg Wheelbase 3954 mm Engine 2.2 L - 114 kW CDI catalytic converter Low-emission according to Euro 5 emission standard Formerly a city vehicle Errors, changes and prior sale reserved We only sell according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale reserved. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m. and on Saturdays by appointment. Outside these opening hours, telephone appointments can be arranged. We will gladly accept your existing used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale are subject to change!

Condition: used, functionality: fully functional, mileage: 140,541 km, power: 114 kW (155.00 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 3,170 kg, maximum load weight: 1,510 kg, overall weight: 4,690 kg, axle configuration: 4x2, next inspection (TÜV): 06/2027, fuel: diesel, color: silver, driver cabin: other, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 7, total length: 6,400 mm, total width: 2,300 mm, total height: 2,890 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,300 kg, loading space length: 2,300 mm, loading space width: 2,100 mm, loading space height: 1,800 mm, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, power assisted steering, soot filter, trailer coupling, truck registration, Ford Transit tipper truck with tarpaulin and drop-side body Double cab with 7 seats Vehicle from first owner Formerly a municipal/government vehicle Low-emission Euro 5 Green environmental badge 6-speed manual transmission Air conditioning Auxiliary heater Electric windows Bedozcac Nspfx Afwsdg Electric exterior mirrors Power steering Central locking with remote control Driver and passenger airbags Radio with Bluetooth hands-free system Multi-function steering wheel Trailer coupling, 2,800 kg towing capacity Raised front and side panels Lashing points on the loading area Large tool cabinet behind the cab Small tool box under the loading area Twin-tire rear axle Yellow LED rotating beacon Payload 1510 kg Unladen weight 3170 kg Permissible total weight 4690 kg Wheelbase 3954 mm Engine 2.2 L - 114 kW CDI catalytic converter Low-emission according to Euro 5 emission standard Formerly a city vehicle Errors, changes and prior sale reserved We only sell according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale reserved. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m. and on Saturdays by appointment. Outside these opening hours, telephone appointments can be arranged. We will gladly accept your existing used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale are subject to change!

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Bsdpfx Afozvaz Djwedg Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Condition: used, Year of construction: 2010, operating hours: 1,600 h, Equipment: all wheel drive, JCB Telehandler 531-70 DS !!!!! ONLY 1600 HOURS !!!!! Year of manufacture: 2010 German machine, first owner All-wheel steering Fork Bucket Spare wheel Bodjyqk R Hepfx Afwedg Delivery possible Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/?????/?????..... Roman We will gladly take care of your financing or leasing options. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 EUR Our services for you: - Customs license plate - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,860 mm, travel distance Y-axis: 1,793 mm, travel distance Z-axis: 185 mm, number of axes: 3, overall weight: 4,300 kg, spindle motor power: 17,000 W, spindle speed (max.): 24,000 rpm, This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. • Electrical power: 400 V · 50 Hz · 3~+N · 17.5 kW · 35 A · 24 V • Milling spindle: 1 unit • Working field (X/Y/Z): 3250 × 1250 × 1215 mm • Rapid traverse speed (X/Y/Z): 100 / 50 / 20 m/min Bdjdpfx Afszugvfowjg • Routing area: 3595 × 1378 × 125 mm • Alternative operation area: 1450 mm • Two-field operation area: 1100 mm • Compressed air required: 7 bar • Dust extraction (minimum): 3170 m³/h

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp. Bedpfx Ajv Nqppofwsdg

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] - Travel : 610 [mm] TURNING-MILLING SPINDLE - X stroke : 580 [mm] - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] Bdodpfxszgx Aho Afwjg - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 140 - Tool exchange time : 6 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 114 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4800x2960 [mm] - Machine height : 3170 [mm] - Machine weight : 18500 [kg] MACHINE HOURS - Number of hours under power : 57184 [h] - Spindle hours : 1756 [h] - Number of turning-milling spindle hours : 1694 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Bdsdpfx Aswid Spsfwog Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: excellent (used), Year of construction: 2010, Arburg 370S 500-70 Year of manufacture: 08.2010 Injection unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1550 bar Dosage volume: 44 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 interface Robot interface Air valve x 8 Hydraulic core pull x 1 Bdjdpfx Aszc Nk Asfwjg Control for hot runner x 6 Injection unit hardened - bimetal Option to adjust vertical injection unit via special brackets Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3170 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Bdedpfx Afeywhvhjwsg Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg

Condition: used, Year of construction: 2004, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 2nd – 4th September 2026. For more information go online. Bsdpfx Aozubn Aofwedg

Condition: used, Year of construction: 2008, functionality: fully functional, MEP Shark 282 NC evo band saw machine. This robust saw is ideal for precise cuts in various materials. Bdsdpfx Aezmikvefwjg MEP Shark 282 NC evo Manufacturer: Mep Type: Shark 282 NC evo Year of manufacture: 2008 Condition: used Further information available upon request.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 352 NC EVO, Semi-automatic circular saw for sawing aluminum and light metal alloys, using carbide-tipped circular saw blades. Includes dust extraction and material handling (roller conveyors). Machine for miter cuts from 45° right to 45° left. The vertical alignment allows for sawing operations with the head tilted between 0° and 45° left. Bsdpfx Afev T U Tgswodg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Bodpfx Aoylawxofwodg

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm Bdsdpfxoy Ruvbe Afwjg 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Bdedpfxjxfkm Ao Afwjg Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: used, lifting height: 7,000 mm, Year of construction: 2017, operating hours: 3,507 h, load capacity: 3,100 kg, Equipment: cabin, JCB 531-70 Year of manufacture: 2017 Approx. 3,507 operating hours JCB Eco Max 4.4-liter engine Without DPF or exhaust aftertreatment 3 control circuits 3 steering modes – front-wheel steering, crab steering, all-wheel drive Lifting height: 7 m Load capacity: 3.1 tons Price: €35,900.00 net Bdedpfsyq A Rfex Afweg Available at an extra cost: Earth bucket: €1,490.00 net Light materials bucket, 2 m³: €2,100.00 net Light materials bucket, 2.7 m³: €2,150.00 net Light materials bucket with double wear strip (reversible blade), 2 m³: €2,250.00 net Light materials bucket with double wear strip (reversible blade), 2.7 m³: €2,450.00 net Small work platform for JCB or Manitou, Claas, Merlo, 1.2 m wide: €990.00 net Large work platform, 2 m wide: €1,550.00 net Inspection possible at any time by prior appointment. All information without guarantee.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm MACHINE DETAILS Bodpfxjmkhynj Afwsdg weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm