Used Netzsch 60 Platten, 630X630 for sale (21,310)

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 630 x 630 mm, 20 - 60 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 500 liters, filter area 13 - 40 m², dimensions 2000 - 4500 x 900 x 1300 mm, weight 1500 - 2500 kg, optionally with manual or motor hydraulics, with or without filter cloths Cedpofbbp Dsfx Ac Djha

Condition: used, Cutting mill for high loads (heavy duty) Chedpfxozmdhis Ac Dja Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Year of construction: 1991, condition: good (used), Used progressing cavity pump Manufacturer: Netzsch Type: NE60B Chodpfoilpvtox Ac Doa Machine number: 224898 Year of construction: 1991 Dimensions: L 2500xW 400xH600 mm

Condition: used, Used Netzsch model PMD VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Chsdpfoy Ddv Dox Ac Dea

Condition: excellent (used), CATALOG NUMBER 7503 Chodpfx Acezr Ixcs Dsa TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW Chodpfx Aezrk T Asc Dea 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm Cjdpfx Aszhvaaec Doha - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 125 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Codpfsfbbqhsx Ac Dsha

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4BM geared motor with a 0.37 kW three-phase motor and an integrated 220 V AC electromagnetic brake. The unit is fully functional, tested, and ready for use. The geared motor is in good technical and visual condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4BM Motor power: 0.37 kW Power supply: 3×220Δ / 380Y V, 50 Hz Motor speed: 1380 rpm Output speed: 42 rpm Torque: 60 Nm Chjdjznnm Sopfx Ac Dea Brake: 220 V AC Braking torque: 5 Nm Protection class: IP54 Insulation class: B Weight: 16.88 kg Mounting position: IM V1A Year of manufacture: 2002 Country of manufacture: Germany

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Drive 90 kW Chedpozmc Tdofx Ac Dja With equipment

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Chsdpsznaq Nsfx Ac Dea Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Chjdpfxowc Afhs Ac Doa SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 Cedpjy H Aizofx Ac Deha • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Catalogue no. 6815 Cjdpfozkrnrjx Ac Dsha TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), Catalog number: 7303 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 3 pcs - Max. thickness of the workpiece: 250mm From above: - Pawls - Toothed infeed shaft, pulling - Pressure rollers - Surfacing shaft - Pressure rollers - Smooth outfeed shaft, pulling From below: - Adjustable rollers in the lower bed: 2 pcs - Motor: 7.5kW - Electric bed lifting - Lifting motor: 0.75kW - 4 feed speed settings - Feed motor: 1.5kW - Diameter of dust extraction nozzle: 140mm - Dimensions (L/W/H): 1120x1250x1680mm - Weight: 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Chjdpfezkg Tcsx Ac Doa Net price: 19900 PLN Net price: 4738 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to larger fluctuations)

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 190 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3060 Hts Vibratory Plate – NEW | 30 kN Centrifugal Force | 600 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item number: 5000610042 Technical Data: Manufacturer: Wacker Neuson Model: DPU 3060 Hts Condition: NEW Operating Weight: 190 kg Frequency: 90 Hz Centrifugal Force: 30 kN Working Width: 600 mm Engine: Hatz 1B30 Diesel Engine Engine Output: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium duty Surface Capacity: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction tasks - Robust construction – ideal for daily use on construction sites - 600 mm working width – high surface coverage with a compact design - Ergonomic guide bar – low vibration & comfortable operation - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Codjzh Engepfx Ac Doha Applications: ✓ Paving & medium-sized areas ✓ Landscaping & horticultural construction ✓ Municipal work & construction companies ✓ Fiber optic & cable installation ✓ Compaction work on small to medium-sized construction sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally on request Price ex-warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information provided without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! We also carry DPU 3760, DPU 5260, etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 3060 Hts NEW | Diesel Vibratory Plate 30 kN | Plate Compactor 600 mm Working Width | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new stock! Upon request, we are happy to arrange a virtual inspection of the machine via video call.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 171 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2560 Hts Vibratory Plate – NEW Wacker Neuson DPU 2560 Hts Vibratory Plate – NEW | 25 kN centrifugal force | 600 mm working width | Hatz diesel engine 1B20 with 3.1 kW output Article number: 5000610038 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2560 Hts Condition: NEW Operating weight: 171 kg Frequency: 90 Hz Centrifugal force: 25 kN Working width: 600 mm Engine: Hatz 1B20 diesel engine Engine power: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty compaction Chsdezh D Ilopfx Ac Dea Surface coverage: approx. 624 m²/h Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust design – ideal for daily construction site use - 600 mm working width – high surface coverage in a compact form - Ergonomic guide bar – low vibration & comfortable handling - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality, immediately available Fields of Application: ✓ Paving and medium-sized areas ✓ Landscaping and gardening ✓ Municipal applications & construction companies ✓ Fibre-optic & cable installation ✓ Compaction tasks on small to medium-sized sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Price ex-works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information subject to change. Errors and prior sale excepted. Prices are net of VAT / VAT excluded Other models and sizes available! Also in stock: DPU 3060, DPU 3760, etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 2560 Hts NEW | Diesel vibratory plate 25 kN | Vibrating plate 600 mm working width | Hatz engine | Wacker Neuson compaction technology | Vibratory plate for paving work Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new equipment! A virtual inspection of the machine via video call is available upon request.

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg -Platform: approx. 1740 x 1280 mm -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm Chedpfx Acsn Hbbus Doa -Empty weight: 1270 kg

Condition: good (used), Bead mill, agitator mill, shredder, crusher, grinder Codpfx Acsiqu R De Djha -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete

Condition: like new (used), Year of construction: 2024, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Chjdpjzipu Tefx Ac Dja No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2009, condition: ready for operation (used), Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical and cosmetic products, pastes made from pyrogenic silica, aluminium oxide pastes, plastisols, foam-free aqueous suspensions, casting resins. The machine has been used very little, with control cabinet, powder container, pressure load cells and operating manual. An on-site inspection is possible. Chedpozh Nhqofx Ac Dea

Condition: used, Year of construction: 1996, Name: Used filter press Manufacturer: Netzsch Type: 1000 /110 Year built: 1996 Construction form: Side beam press Filter pressure: 15 bar Press content: approx. 2509 Liters Cycle: Closed Filter area: Approx. 163 m2 Plate size: 1000 x 1000 mm Number plates: 100 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: Yes Csdpevta Najfx Ac Doha Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9.347 x W 2.245 x H 2.435 mm Empty weight: 11.800 kg Technical doc.: Yes Message: It will be available from January 2025 Accessories: A switch cabinet, a control cabinet, a hydraulic system, a light curtain, a filter cloth washing system and drip trays Condition: Second hand Price: On demand

Year of construction: 2006, condition: used, Name: Eccentric Screw Pump Manufacturer: Netzsch Type: NM031BY04S24B Year built: 2006 Material: mild steel Driving force: 3 kW Csdpfx Acjh Tkice Dsha Max. operating temperature: 20 C Dimensions: L 1700 x W 300 x H 500mm Empty weight: 150 kg Speed: 79-262-719 rpm Flow rate: 0,2 - 1-3 m3/h Operating voltage: 400 / 690 V Type of protection: 55 Flanges: DN 65 Condition: Used Technical documentation: no Price: on request

Year of construction: 2007, condition: used, Name: Eccentric Screw Pump Manufacturer: Netzsch Type: NMO45BY04S18B Chsdpfxjhukc Io Ac Doa Year built: 2007 Material: mild steel Driving force: 7,5 / 8,6 kW Max. operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8-10 m3/h Operating pressure: 16 bar Operating voltage: 400 / 690 V Type of protection: IP 55 Condition: Used Technical documentation: no Price: on request

Condition: used, Year of construction: 1984, Name: Used filter press Manufacturer: Netzsch Type: 800/32 Year built: 1984 Construction form: Side beam press Filter pressure: 15 bar Press content: Approx. 480 Liters Cycle: Closed Filter area: approx. 34 m2 Plate size: 800 x 800 mm Number plates: 32 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: No Plate pack length: approx. 2000 mm Chedpow Rb Ehsfx Ac Doa Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4.500 x W 1.700 x H 2.000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light curtain & drip trays. Condition: Second hand Price: On demand