Used O2/ Co2 Incubator - Calibrated! for sale (2,630)

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, comes with decontamination mode !!! Overall Dimensions - inches (mm): Model NU-5510/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - Minimum Temperature for 145 DEG Cycle 135°C Decontamination: 95 DEG Cycle 87°C - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% Fodpfx Aexbdt Iod Njgb - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Fgedpfx Aexaungjd Nsb Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells • User-friendly thanks to easy routine cleaning and convenient operation • Cost-effective operation without consumables PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures

Condition: refurbished (used), functionality: fully functional, !!!We have two units in stock, price is for one unit only!!! Thermo Scientific 3951 Reach-In CO2 Incubator - Calibrated! Specification Details Capacity 821 L (29 cu ft) Temp. Range Ambient + 5 °C to 50 °C CO₂ Range 0–20% (TC sensor) Humidity < 80% (medium) or < 90% (high) with 15 L reservoir Uniformity ± 0.3 °C at 37 °C (control ±0.1 °C) Interior Dimensions 68.5 × 78.7 × 152.4 cm Exterior Dimensions 83.8 × 96.5 × 203.2 cm Weight ~227 kg (500 lb) Electrical 200/230 V, 50/60 Hz, 10 A Certification CE, UL, cUL Fedpfjxaqncjx Ad Nsgb Good working condition. Please check out our other listings as well.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit Fgedsxbdyhopfx Ad Neb - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Year of construction: 1989, condition: excellent (used), We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Fodpfjvdb A Nox Ad Nogb Manufacture: AGA CRYO Volume: 600 litres; Working pressure: 17,5 bar Export from EU We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: like new (used), machine/vehicle number: 42556446, Top Opportunity! We are pleased to offer this virtually unused Heraeus / Thermo Scientific Cytoperm 2 CO2 incubator—one of the world's leading brands—which comes from the previous ownership of the Bundeswehr Medical Academy in Munich. The unit is in mint condition, with the stainless steel interior and shelves spotless – see pictures. There is absolutely no damage or malfunction; the incubator is ready for immediate use. However, for the sake of proper procedure, we must point out that all periodic safety checks (in accordance with STK / MTK regulations) must be freshly performed before any commercial use! Key features: • Cytoperm 2 controls temperature, CO2 concentration, and relative humidity • Convenient hot-air disinfection at 180°C without having to remove connectors or sensors • External water reservoir – no open water surfaces inside, effectively preventing contamination • Air-jacket heating system ensures constant and stable temperatures on all internal surfaces • Six individually sealed glass doors minimize atmospheric changes when opened, significantly shorten recovery times, and reduce contamination risk • Unique pyrolytic germ barrier sterilizes water vapor from the external reservoir before it enters the culture chamber • Full humidity control and display • Continuous monitoring of environmental parameters • Thermal conductivity CO2 sensor offers outstanding long-term stability and reliability Technical data: Capacity (US): 7.7 cu. ft. Fsdpfx Adjyv H Tpj Njgb Data output: Case RS232 Description: Single 220-L incubator Capacity (metric): 220 L CO2 concentration range: 0 to 20% CO2 sensor technology: TC sensor Lighting: LED Material: Stainless steel O2 control: None Relative humidity: 90%, controlled Temperature range (metric): Ambient temperature +5°C to 50°C Type: CO2 incubator CO2 incubator: External humidity reservoir Interior dimensions (D x W x H): 66.9 x 60.7 x 58.8 cm (26.3 x 23.1 x 23 in) Dimensions (D x W x H): 58.5 x 60.7 x 66.9 cm (33.7 x 36.2 x 30.5 in) Electrical requirements: 230 V, 50/60 Hz Voltage: 230 V Weight: 107 kg (235 lbs) Delivery and payment terms: Ex works, payment in advance. The device can be picked up during our regular business hours; please schedule an appointment in advance. For an additional fee, insured shipping by carrier is available within three working days after receipt of payment. The total system weight including accessories and pallet is approx. 130 kg. This sale is intended exclusively for commercial customers; of course, you will receive an invoice with VAT shown separately. Private buyers can purchase the device "on behalf of the customer"; a direct commercial sale to private individuals is expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller or for injury to life, limb, or health. For questions regarding pricing or technical details, please do not hesitate to contact us at the address provided.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Special Opportunity! We are offering top-maintained CO2 incubators from the world-renowned brand "Heraeus" or "Thermo Electron" model HERAcell 150i, copper version, sourced from the medical academy inventory of the German Armed Forces (Bundeswehr). The HERAcell 150i is one of the most widely used and reliable devices in its class, and is considered essential in laboratories worldwide. Features include a chamber made entirely of copper with a water reservoir integrated directly into the working space for added convenience, along with three copper shelves. The devices were procured by the Bundeswehr in 2014 but saw very little use, primarily being powered on occasionally for testing purposes only. All components, including the shelves, present in excellent technical and visual condition—please see images. There are no damages or malfunctions; the unit is immediately ready for operation. However, we would like to point out for proper order that, prior to commercial use, all regular safety inspections as per STK / MTK requirements must be renewed! The greenish discolorations shown in the photos are a result of water interacting with copper during functional testing and do not impact usability in any way. Fsdovph Enepfx Ad Negb Included in the scope of delivery: the incubator itself and three copper shelves. The price is per device as described and includes accessories. Technical Data: - Capacity (Imperial): 5.3 cu. ft. - Data output: RS232 - Capacity (Metric): 150 L - Chamber material: Copper - CO2 concentration range: 0 to 20% - CO2 sensor technology: TC sensor - Illumination: LED - Material: Copper - O2 concentration range: Optional 1 to 21% or 5 to 90% - Oxygen control: Optional 1 to 21% or 5 to 90% - Relative humidity: < 90% at 37°C - Type: CO2 Incubator - Application: multipurpose - Humidification source: integrated water reservoir - Interior dimensions (L x W x H): 20.9 x 18.5 x 23.9 in (53 x 47 x 60.7 cm) - Exterior dimensions (L x W x H): 30.8 x 25.1 x 34.1 in (78.2 x 63.7 x 86.7 cm) - Weight: 70 kg Ex-works pricing. Collection is possible during our regular business hours with a prior appointment. Insured freight shipping by a forwarding company is available within three working days of receipt of payment for an additional fee. Total system weight, including accessories and pallet, is approx. 100 kg. Sale is exclusively to commercial clients. You will receive a VAT invoice. Private individuals may purchase the equipment “on behalf of a customer;” direct commercial sales to private buyers are expressly excluded! Sold as-is, with warranty and liability for material defects excluded. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duties by the seller, or for injury to life, body, or health. For questions about pricing or technical details, please do not hesitate to contact us at the address provided.

Condition: used, Thermo Scientific HERAcell 150 i CO2 incubator cabinet Chamber volume [l]: 150 l External dimensions (W x H x D): 637 x 867 x 782 mm Internal dimensions (W x H x D): 470 x 607 x 530 mm Fgjdpfx Adstzakqo Neb Interior material: Solid copper You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2021, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2021 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions Description has been adopted. You are welcome to come by for a viewing. Fsdpfxotxakxo Ad Njgb We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2020, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2020 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions. - Condensation control: this prevents unwanted condensation in the chamber and possible contamination. Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Fgjdpfx Adjtxaczj Nsb Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2020, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2020 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). Fgedpfotxarcex Ad Njb - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions. Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Fgedpfx Aexxygxjd Neb Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Condition: excellent (used), Binder Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Fsderp Enbspfx Ad Njgb Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2016, condition: like new (used), functionality: fully functional, Thermo Scientific CO2 Incubator BBD 6220. Internal volume: 220 L. Stainless steel interior. Foil control panel with digital display. Temperature safety control. H2O level indicator. Fedpfx Aswurbpsd Njgb Disinfection routine: 180°C/3h. Ambient temperature range: +5°C to +50°C. CO2 range: 0-20%. Humidity: 60-95% rH. Maximum load per shelf: 5 kg. Maximum total load: 30 kg. Internal dimensions (HxWxD): 67x60x50 cm, divided into 6 compartments. External dimensions (HxWxD): 85x95x95 cm. 230V. 50/60Hz. 1.2 kW. Unused. Tested, including functional guarantee.

Condition: like new (used), Year of construction: 2023, PHCBI CO2 Incubator MCO-230AICUV. Protective door (glass, interior). 4x height-adjustable perforated shelves. 1x drip tray. Lockable. Interior: stainless steel. On castors. Display with touch control panel. Unused. Includes functional warranty. Fgjdpfxjwutx Ns Ad Njb

Condition: like new (used), Device as new ex demo. Fedpfxewfh T Ae Ad Nsgb Description The Binder CO2 incubator type CB210 is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used, among others, in tissue bioengineering, in vitro fertilization (IVF) clinics and teaching hospitals. The Binder CB210 also contains six compartments. The amount of CO2 is measured using a built-in infrared sensor. The outer door is made of stainless steel. In addition, this CO2 incubator is equipped with six shelves and forced convection. Technical data Voltage: 230 V, 50/60 Hz Current: 6.6 A Power: 1.5 kW CO2 control range: 0 – 20% Temperature range: approx. 7 °C above ambient temperature up to 60 °C External dimensions (W) x (D) x (H): 74 x 79 x 106 cm Internal dimensions (W) x (D) x (H): 58 x 44 x 75 cm

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, input voltage: 110 V, laser power: 30 W, working range: 175 mm, laser wavelength: 10,600 nm, input frequency: 50 Hz, Nearly unused Cajo Vega 30W CO2 marking laser (year 2023) High quality and top precision available! Our company is selling a like-new Cajo Vega marking laser due to low usage needs. The device was purchased new in 2023 and has seen very little use, making it virtually as good as new. This unit is better equipped than standard: it includes the extended Cajo Studio+ software as well as red-dot preview, which enables fast marking alignment and helps prevent marking errors. Fodpfx Aey I Ui Aod Njgb Machine type: Laser marking machine Serial number: Model: Cajo Vega CO2 30 W Laser power: 30 W Laser wavelength: 10600 nm Input voltage: 110–115 V Input frequency: 50 Hz Power consumption: 720 W Year of manufacture: 2023 If you have any questions or require further information, please contact us by message. We will respond as soon as possible.

Condition: as good as new (ex-display), functionality: fully functional, Compact and quiet CO2 laser with a maximum marking area of 460 x 305 mm (L x W) and a maximum object height of 145 mm. Possible applications: Ideal for laser engraving and laser cutting of plastics, wood, glass, and other organic materials, as well as coated surfaces. Engrave glass, produce plastic signs, cut, mark, and define crease lines on paper. Fgedpfxjy Ia Dxs Ad Neb High-quality construction: The laser engraver features a one-piece aluminum housing and includes professional CAD/CAM software and an RF laser source. Efficient and safe operation: This space-saving laser is equipped with an automatic scanning function, autofocus for automatic vertical adjustment, an integrated control panel, and an illuminated marking table with a wide front loading door. In addition, a built-in air compressor ensures a clean lens, and an exhaust system is integrated. Laser parameters can be stored in a library. Multi-technology software: Centralized management of settings, designs, and results within a single working environment. Equipped with a point-and-shoot function for easy positioning and job setup as well as a print-and-cut function for cutting printed materials. Dimensions: 775 x 725 x 450 mm Marking area: 460 x 305 mm Max. object height: 145 mm Max. speed: 2,540 mm/s Laser source: CO2 Power: 40 W Software: Gravostyle software (included)

Condition: ready for operation (used), Year of construction: 2014, This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Additional equipment • Bundleloader: 6.5 meters • Steploader: 6.5 meters • Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back Machine Benefits Technical Machine Benefits • Equipped with a 3d cutting head • Includes options such as weld detection, active focus, active scan, active piercing. • Laser source: rofin dc035 3. 5kw • Last maintenance: 24/6/2025 Fsdpfxjx H A Rxe Ad Nogb • Maximum weight: 35 kg/m • Maximum length: 6500mm • Maximum round diameter: 206mm • Maximum square: 200x200mm • Maximum thickness: 12mm Extra Information Machine still under power

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Fodpowcwbqofx Ad Nsgb

Condition: used, Refrigerant compressors system Bitzer Fgedpfx Adsy Aw S Ne Nsb -Type: 4HTC-20KI-40S (x3), 2HHC-2KB-40S (x2) -Volume: 12 m3/h (x3), 4.34 m3/h (x2) -Control cabinet included -Dimensions: 3200 x 870 x 1850 mm -Cabinet dimensions: 2050 x 1200 mm -Items in magazine: 1 -Reference number: Z122 -Condition: Used in very good condition, ready to work

Condition: used, Refrigerant compressors system Bitzer -Type: 2JSL-2K-40S (x1), 2HSL-3K-40S (x2), 4HTC-20K-40P (x2), 4HTC-20K-40S (x1) -Volume: 3.48 m3/h (x1), 4.34 m3/h (x2), 12 m3/h (x3) -Cooling capacity for CO2: approx. 96 kW at -20°C/40°C -Dimensions: 3980 x 880 x 2050 mm Fgodpey Aw R Ejfx Ad Nsb -Items in magazine: 1 -Reference number: Z120 -Condition: Used in very good condition, ready to work

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Fgsdpfxsrz R Aro Ad Njb Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF. Fodpfx Adjx H R Rys Nogb

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank suitable for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Fgedpoyuu Scofx Ad Nob Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.