Used Oil-Free Screw Compressor + Dryer for sale (22,277)

Condition: excellent (used), Year of construction: 2002, operating hours: 122,000 h, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), fuel type: electric, volume flow: 1.56 m³/h, operating pressure: 8 bar, noise level: 65 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023. Refrigerator: Ppodpfxsrn S Hpj Akqet Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 Ppjdpfoy Iplfsx Akqst 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Ppjdsu Rnzispfx Akqjt Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Mains frequency: 50 Hz The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: excellent (used), Year of construction: 2017, s016677 CREEMERS TYPE: RCA7.5 S/N: ITJ099846 YEAR: 2017 POWER (kW): 7.5 OUTPUT (m3/min): 1 PRESSURE (bar): 10 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no Podpfxoy Ddfrs Akqspt DOCUMENTS: no CONNECTION: 3/4 NEW/USED: USED s016691 MAKE: CREEMERS TYPE: EDD1200 S/N: ITJ059524 YEAR: 2017 POWER (kW): 0.475 OUTPUT (m3/min): 2 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: no BUILT-IN DRYER: R134a 0.35kg HEAT EXCHANGER: no COOLING (AIR/WATER): no ON TANK: DOCUMENTS: no CONNECTION: NEW/USED: USED owomat

Condition: excellent (used), Year of construction: 2002, operating hours: 46,357 h, functionality: fully functional, Oil-free screw compressor Atlas Copco GA75VSDFF Inverter and dryer integrated. 160 kW 7.5 bar Ppedpfxsyz R U Is Akqot 27.90 m3/min Year of manufacture: 2002 Operating hours: 46,357

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: Podpjdtm Ndefx Akqjpt (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Psdpfx Aewgca Tokqspt Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter Ppsdew Rcgtjpfx Akqjt CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Pedsw Nzrfepfx Akqspt Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Ppedpjwrm T Ijfx Akqst

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Psdpfx Asv Al Nqjkqjpt Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 Psdpfx Ajc Rt D Nokqopt technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: good (used), Year of construction: 2003, MANUFACTURER: ATLASCOPCO MODEL: ZT18 SERIAL NO.: AII702327 YEAR: 2003 POWER (kW): 18.5 CAPACITY (m3/min): 2.51 Pjdpfx Akexxb Evsqjpt PRESSURE (bar): 8.6

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 4 kW (5.44 HP), We offer you: Podpsvygf Isfx Akqjpt Compressor with boiler and refrigeration dryer Manufacturer: Kaeser Type: SX 6 / TA 11 Year of manufacture: 2004 / 1997 Subject to changes and errors in the technical data and information as well as prior sale! Location: Berlin

Condition: used, operating hours: 32,574 h, Ingersoll Rand SSR MH-55 Rotary Screw Air Compressor – Used Industrial Compressor Description: Ingersoll Rand SSR MH-55 industrial rotary screw air compressor, suitable for workshop, manufacturing, fabrication or general factory compressed-air supply. This is a heavy-duty industrial compressor with integrated control panel, air pressure and temperature gauges, hour meter, electrical cabinet and internal compressor/motor assembly. The machine is currently in used condition and has been removed from regular service / stored on site. The hour meter show approximately 32,574 hours. Key features: Manufacturer: Ingersoll Rand Model: SSR MH-55 Type: Rotary screw air compressor Integrated control panel Air pressure gauge Temperature gauge Hour meter fitted Internal compressor and drive motor present Industrial cabinet-mounted unit Suitable for production or workshop air supply Good candidate for recommissioning, refurbishment, spares or export Condition: It is offered sold as seen. Buyer should inspect the compressor and satisfy themselves as to running condition, electrical requirements, service history, capacity, pressure rating and suitability before purchase. Important note: Professional inspection, lifting, loading, transport and recommissioning will be the buyer’s responsibility unless otherwise agreed. Electrical and pressure-system checks should be carried out before use. Ideal for: Engineering workshops Manufacturing sites Fabrication shops Spray shops Industrial air systems Compressor refurbishment specialists Spares or parts use Ppedpfx Ajy Ry E Uokqjt Viewing recommended. Loading / removal: Buyer to arrange, unless agreed separately

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Pedpfxsy T Ibvs Akqept Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Year of construction: 2006, condition: good (used), Airpress screw compressor with dryer Podpei Eq D Dofx Akqopt Bar: 10 Tank: 200 L Year: 2006

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air Podpfx Akjy H Dv Aeqopt The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2014, operating hours: 53,000 h, machine/vehicle number: APF 194907, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm MACHINE DETAILS Ppedsy Ia R Sepfx Akqst Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: new, Year of construction: 2026, total length: 1,010 mm, total width: 680 mm, total height: 1,605 mm, power: 7.5 kW (10.20 HP), fuel type: electric, pressure (min.): 6 bar, pressure (max.): 8 bar, Equipment: CE marking, DUCOMP BRD 7.5kW - Screw compressor + Air Tank + Dryer In BRD Series Compressors, the compressor and dryer are mounted on the air tank and their Ppjdpfoygdk Esx Akqjt connections are made. It is shipped ready for operation thanks to its internal tank and dryer.

Condition: used, Year of construction: 2002, Air compressor (oil-free) CompAir R 180 Model R 180 TS-Z11 Podpfsu Rphqsx Akqept Year of construction: 2002 Weight: 3860 kg Volume flow: 17.0 m³ / min Intake pressure: 1 bar Stage pressures: 2.4 / 12 bar Installed motor power: 110 kW The compressor was regularly serviced and inspected until it was decommissioned.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 45 kW (61.18 HP), operating pressure: 10 bar, SCREW COMPRESSOR EKOMAK 45, type EKO 45, 10 bar, 45 kW. Equipped with refrigerated dryer, water separator, and 1,500 L tank. EXCELLENT CONDITION, ALWAYS SERVICED. READY FOR IMMEDIATE USE, ALL DOCUMENTS AVAILABLE. Ppjdsy D D D Uspfx Akqjt

Condition: like new (used), CATALOG NUMBER 7969 TECHNICAL SPECIFICATIONS - Motor power: 11kW - Tank capacity: 500l - Noise level: 70dB - Max pressure: 10 bar - Performance: 1500 l/min - Performance: 90 m3/h - Voltage supply: 400 V / 50 Hz / 3 Ph - Dimensions (L/W/H): 1920x750x1600mm - Weight: approx. 420kg ADVANTAGES – Manufactured by the Polish company GUDEPOL – Screw compressor is equipped with a microprocessor control panel, informing the user about the compressor's operating mode – Not painted Ppedpsy Dfydofx Akqst – Used machine – In excellent condition Net price: 16,900 PLN Net price: 4,030 EUR (at a rate of 4.2 PLN/EUR) (Prices may change with greater exchange rate fluctuations)

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Psdexmg A Aopfx Akqept Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Ppedpfx Aoxnyhuekqst Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm