Used Omc Omc Pl 90S for sale (11,954)

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Hodpfx Asyalmbsb Nefg Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Hedey Nkuwopfx Ab Nsfg Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 No of Pressing cylinders: 8 Hfjdpfov Akwgex Ab Nog

Condition: new, Year of construction: 2023, pressing force: 120 t, total length: 3,000 mm, total width: 1,300 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, opening width: 400 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons * maximum heating temperature 120 degrees * logic control system * machine control from touch panel Hedpfxoqu U Hqo Ab Nsfg * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production * heating medium: oil with built-in heater. Machine brand new, available from stock.

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Hsdpfxeiypzls Ab Nofg Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Hedpfoimwp Sox Ab Nofg Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request New machine

Condition: like new (used), functionality: fully functional, machine/vehicle number: FR Jungheinrich, Year of construction: 2020, load capacity: 1,000 kg, lifting height: 6,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,600 mm, fork length: 1,200 mm, tire condition: 95 %, Equipment: head guard, lighting, sideshift, Jungheinrich EFG 550 Electric Front Forklift, 450 hours, Year 2020, 6200mm lift height Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2020 Operating hours: 485 (may vary, machine is still in use) Technical condition: very good Optical condition: very good Mast type: none, lift height: 6,200 mm Overall height: 2,600 mm Free lift: 1,800 mm Hfjdpfx Abopq Id Rj Nog Fork carriage / side shifter Fork length: 1,200 mm Incl. charger In very good condition Pickup by appointment only in 79111 Freiburg. Shipping by freight carrier possible, please inquire with your postcode.

Condition: new, mileage: 100 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 72,800 mm, loading space width: 24,800 mm, loading space height: 26,700 mm, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone at ...). S-Way AD190S40/P flatbed curtain-sider with tail lift. Engine speed: 2,200 rpm. Standard dipstick and oil filler neck on the gearbox. Engine type plate, steel rims, standard reverse gears. Emission standard EURO VI E. Speed limiter set to 90 km/h. Manually operated cab tilt system. Front underrun protection for chassis with a gross weight over 7,490 kg. Plastic bumper, cab add-on parts in black, AD MY low roof cab, non-heated windshield, standard IVECO logo in light grey. Standard insulated cab roof, flat roof painted white. Electronic immobilizer and two vehicle keys. Storage with two compartments in the rear wall. Dashboard design: plastic with black trim. EC Certificate of Conformity, instrument cluster 10 inches, digital EC control unit 4.1. Air suspension on rear axle, SR-SOLO LIGHT 17x, batteries mounted horizontally on frame. Standard air tank labelling. Alternator 2,160 W (24V x 90A), recommended for tail lift operation. Rear shock absorbers. Vertical dry air filter. Configuration for temperate climate, standard version. Air compressor 1-cylinder, 352 cc. Chassis frame in grey. Standard trailer brake system. Steel air tanks, number depends on suspension and trailer version. Standard applications, front axle stabilizer. Exhaust tailpipe to the left. Standard component positioning on chassis. Standard ride height. Rear underrun protection omitted. Rear frame overhang: 2,208 mm. Fuel tank: 290 liters, aluminum. AdBlue tank: 50 liters, ECO. NORMAL MODE. Standard gearbox mode, 4G connectivity box incl. TCO service contract. Radio with Bluetooth, DAB+, and 7-inch display. Tire pressure monitoring system (TPMS) with internal sensors. Four upper DIN storage compartments. Gearbox software with ECO-Roll (coasting function), standard Cursor 9 engine setting. Adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning, hill holder for comfortable hill starts, electronic stability program (ESP), rearview monitoring system with camera, blind spot monitoring system (BSIS, right), intelligent speed assistant (ISA), NO HIGHWAY ASSIST, front area monitoring (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake. Pre-cabling for alcohol interlock (ALC). CEE-type plates, NOISE ECE 51/03, digital VIN code. CAMBIO 12TX 1850 TD, VIN: manufacturer index ZCF. ECAS air suspension with two sensors. Tires: 315/70 R22.5. Manual roof hatch. First-aid kit. Fog lamps with cornering/turning light. Cab air suspension. Exterior mirrors electrically adjustable and heated. Front LED headlights. Black decorative film on doors. Transparent sun visor installed outside on the cab roof. Leather steering wheel with multifunction buttons for radio, phone, cruise control, and menu navigation. Sun blind for driver's side window. Signal horn behind bumper (air-powered). Fully automatic air conditioning. Driver’s seat: high-comfort, multi-adjustable, air-sprung, integrated headrest, integrated height-adjustable seat belt, lumbar support with three-stage cooling or heating function. Luxury passenger seat: four-way adjustable, air-sprung, integrated headrest and seat belt, heated, ... Hedpfxoy Srt He Ab Nsfg

Condition: refurbished (used), Year of construction: 2017, Vutek H2000 UV Hybrid Printer Hfsdpfxjyzg Tys Ab Njg fully refurbished with 3-month warranty Colors: 6C CMYL LCLM, 2 White Resolution: 1000 dpi with 7pl Ultradrop Print width: 205 cm, print height: 5 cm Speed up to 90 m²/h

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, Shelf length: 3000 mm Shelf width: 1300 mm Clearance: 400 mm 6 hydraulic cylinders Piston diameter: 85 mm Machine control via touch panel Built-in electric oil heating Electric time-controlled opening Safety breakaway cable Year of manufacture: 2025, NEW Control system: logic control Overall dimensions: Length: 360 cm Width: 160 cm Height: 203 cm Hfjdpfsy N Rczsx Ab Neg

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Hodpjyfpwzjfx Ab Nofg Iveco S-Way AD190S40/FP 4x2 Refrigerated Box Truck + Tail Lift + Door Superstructure: Lamberet deep-freeze body, Type SLP YPA, internal dimensions: L 7,383 mm x W 2,495 mm x H 2,450 mm; external dimensions: L 7,563 mm x W 2,600 mm; Insulation: Floor: 134 mm, Roof: 84 mm, Side walls: 45 mm, Front wall: 85 mm, Rear doors: 90 mm; ATP certificate for multi-compartment vehicle; Mitsubishi TU1250Mt underfloor refrigeration unit (Multi-Temp); Evaporator S + MW; incl. Euroscan RX3; incl. extension cable for stationary cooling (loose, supplied in tool box); CA axle configuration 4x2, 2 axles, rear axle drive; CT cab type AD MY; DR steering SX left-hand drive; EM emission level: Europe; EP engine: 400 C9 Cursor 9, 400 HP, Euro VI; GT gearbox: TX-12M, 12-speed HiTroniX automated; MT permissible gross weight: 18-20 t; RT drive axle version: SR single reduced, single axle; SU suspension: FP full air suspension; TF brakes: DISC-DISC (disc/disc); US use: STD standard; VE vehicle variant: CABINAT - standard chassis with cab; VS vehicle setup: ON; WB wheelbase: 5700 mm. 73131 DRIVE T. 315/70 R22.5 tires, 00640 roof hatch, mechanical, 00632 transparent sun visor (fitted externally on cab roof), 02326 painting of cab plastic parts in cab color, 72537 hot water circulation pump (suitable as auxiliary heating, utilizes residual coolant heat, recirculated), 02443 leather steering wheel, 78563 air horn behind bumper (compressed air), 02576 batteries 225 Ah, 05365 without jack, 75182 electrical pre-installation for tail lift operation as per VEHH standard, 07356 weight variant: front axle 8,000 kg / rear axle 11,500 kg (technical possible: 13,000 kg), 78713 battery charging socket, terminals, 07805 trailer coupling, make: Rockinger, 00430 trailer version for trailer operation with continuous braking system, 00733 rear axle ratio: i 2.85, 00159 rear crossmember, D-value: 130 kN, 02085 trailer socket for 24 volt operation, 15-pin, 06156 trailer coupling, 40 mm, 130 kN, 00351 edge protection at frame end, 00875 Infotainment 10" TFT display, 05108 hazard warning beacon, 02548 side marker lights, 75181 reversing warning buzzer, deactivatable, 50105 white IC 194, 30804 documentation (operating manuals), 30184 tire manufacturer: GOODYEAR, 20504 tires: 315/70 R22.5, 28588 KMAX S GEN-2 (3PMSF), KMAX D GEN-2 (3PMSF), 72920 operating and maintenance manual (electronic), 02659 fully automatic air conditioning, 02759 air suspension for driver's cab, 05629 roller sun blinds for side windows (driver and passenger side), 02916 HI-Comfort driver's seat (multi-adjustable, air-sprung, integrated headrest, integrated height-adjustable seatbelt, lumbar support, with 3-stage cooling or heating), 72543 front LED headlights, 78715 LED rear lights, 72629 fog lights incl. cornering/turning light, 00915 electric parking brake, 07306 axle load display in cluster, 78287 lane departure warning system (LDWS), 14522 adaptive cruise control (ACC), 73240 electro-hydraulic power steering. On request, we can prepare a leasing or financing offer for you. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our homepage. Subject to errors, changes, and prior sale! ESP, navigation system...

Condition: used, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, loading space length: 73,100 mm, loading space width: 25,000 mm, loading space height: 26,330 mm, Year of construction: 2026, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel is available to assist you (by phone at...). Hsdpfx Aeyfvtvob Nsfg CO S-WAY AT190S40/P 4x2 box truck with tail lift Engine speed: 2200 rpm, standard oil dipstick and oil filler neck on the transmission, engine type plate, steel rims, standard reverse gears, speed limiter 90 km/h, manually operated cab tilting mechanism, front halogen headlights, black decorative film on doors, cab rear wall without window, fog lights, front underrun protection for chassis with a gross weight over 7,490 kg, first aid kit, plastic bumper, cab attachments in black, non-heated windshield, electrically adjustable and heated exterior mirrors, standard cab roof insulation, white flat roof, electronic immobilizer and 2nd vehicle key, digital EU tachograph 4.1, static passenger seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, COC-type approval, 2 wheel chocks, batteries mounted horizontally on frame, standard labels for air tank, generator 2160 watts (24 Volt x 90 Amp), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate version, standard version, air compressor 1-cylinder, 352 cc, chassis frame in grey, digital VIN code, APU air release to atmosphere, standard full-train brake, steel air tanks - number depends on suspension and trailer version, standard applications, front axle stabilizer, exhaust end pipe to the left, VIN: manufacturer index ZCF, emission standard EURO VI E, rear frame overhang 2,793 mm, rear underrun protection omitted, AdBlue tank 50 liters, heated fuel pre-filter with separator, standard transmission mode, optimized aerodynamics at A-pillar, toll system (OBU) pre-installation including antenna and dashboard wiring, ECO-Switch (switch from Power to Eco mode to optimize Total Cost of Ownership (TCO) by fuel-optimized engine and transmission tuning), VDI interface (Vehicle Data Interface) for telematics services (FMS) version 4.0, transmission software ECO-Roll (freewheeling function), driving style analysis (DSE), adaptive cruise control (ACC), lane departure warning system (LDWS), warning triangle as per ECE-27 directive (design and dimensions), warning beacon, electronic stability program (ESP), advanced emergency braking system (AEBS), load compartment dimensions: L 7,310 mm x W 2,500 mm x H 2,633 mm. We can provide you with a tailored leasing or financing offer upon request. Mr. Seidel (Tel...) will be pleased to assist you further. For more information, please visit our homepage. ...Errors, amendments, and prior sale excepted! Navigation system, particulate filter = Further information = Engine displacement: 9,000 cc Gross vehicle weight: 18,000 kg Please contact Tobias Ebert for further information.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Year 2021 Condition: ex-demo, like new - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm Hsdpfx Absy Erwfo Nofg - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection Hfedpjhrukiefx Ab Neg

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed Hfjdpfxjhrumae Ab Nsg - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: Hfedpfx Aberxcu Sj Nsg - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Bito Type: PL 38 Hodpfx Abenfvnuo Nsfg Included in delivery are: 01x pallet rack traverse, used Material color: blue box profile: 127 x 50 mm type of truss: PT36.127SN agraffe: 3 HK (hooks) clear width: 3.600 mm max. load per truss pair 2.400 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: good (used), Technical data: Manufacturer: BITO Hsdpfx Aoi Ema Eeb Nsfg Type: PL 38 (Adjustment grid: 75|75 mm) Included in delivery: 01 x console, used Material color: sendzimir galvanized Opening dimension: 47x51 mm 02 x nut M8 02 x washers Ø 8,4 02 x screws M8x20

Condition: used, Technical data for the frame profile: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x frame profile, used Material color: sendzimir galvanized Frame profile: P 20 Profile dimensions: 90 x 65 x 2.0 mm Frame height: 2,475 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the Hfsdoufw Acspfx Ab Nsg or scope of delivery can be requested from us.

Condition: good (used), Technical data for pallet rack beam: Hjdow Dc U Ejpfx Ab Nefg Racking system: Bito Type: PL 38 Scope of delivery includes: 01x pallet rack beam, used Material color: blue Box profile: 127 x 50 mm Beam type: PT36.127LN Connector: 3 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 2,300 kg, with evenly distributed load 02x safety pins, used Version: fully galvanized For securing the beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet rack upright: Racking system: Bito Type: PL 38 Included in delivery are: 01x pallet rack upright, used material color: sendz. galvanized type of upright: P 20 upright profile dim.: 90 x 65 x 2.0 mm Incl. cross and diagonal braces, Hfodpfx Ajnfvlyob Nog foot plates The stands are pre-assembled ( screwed truss ) 4.800 mm high 900 mm deep Note: The yellow upright protectors are not part of the delivery delivery scope, but can be purchased as an option.

Condition: good (used), Technical data for pallet rack beam: Racking system: Bito Type: PL 38 Included in delivery: 01x Pallet rack beam, used Material colour: blue Box profile: 110 x 50 mm Beam type: PT36.112LN Connector: 3 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,900 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Hedpfjw Dd Srsx Ab Njfg Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping beyond this is subject to additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone at ...). IVECO S-Way AD190S40/P box body with tail lift Hodpfxjyfqprj Ab Nefg Steel wheels, standard reverse gears, speed limiter 90 km/h, cab tilting device operated manually, halogen front headlights, black decorative film on doors, rear cab wall without window, fog lights, front underrun protection for chassis with a gross weight over 7,490 kg, first aid kit, plastic bumper, black cab attachments, electrically adjustable and heated exterior mirrors, standard cab roof insulation, flat roof in white, electronic immobilizer and second vehicle key, digital tachograph 4.1, static passenger seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, two wheel chocks, batteries mounted horizontally on the frame, generator 2160 Watt (24 Volt x 90 Amp), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, single-cylinder air compressor, 352 cc, chassis frame in grey, APU pressure release to atmosphere, standard combination brake, steel air tanks (number depends on suspension/axle version), front axle stabilizer, exhaust pipe to the left, emission standard EURO VI E, rear frame overhang 2,793 mm, omission of rear underrun protection, AdBlue tank 50 liters, heated pre-filter with separator, standard transmission mode, optimized A-pillar aerodynamics, pre-installation for toll system (OBU), includes antenna and wiring to dashboard (without receiver unit), ECO switch (switch between power and eco mode to optimize total cost of ownership (TCO) through fuel-optimized engine and gearbox settings), VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0, Eco-Roll transmission software (freewheel function), driving style analysis (DSE), adaptive cruise control (ACC), lane departure warning system (LDWS), warning triangle according to ECE-27 directive, warning beacon, electronic stability program (ESP), emergency brake assist (AEBS), tires 315/70R22.5, transparent sun visor exterior, curtains at bed, pneumatic horn behind bumper, ashtray in center console, reinforced parabolic spring on front axle, electrical preparation for tail lift operation as per VEHH standard, front axle weight variant 8,000 kg / rear axle 11,500 kg (technically possible: 13,000 kg), reinforced rear torsion bar D 60mm, battery disconnect switch in cab (electronically operated), batteries 225 Ah, without jack, battery charging socket with terminals, rear axle ratio: i 3.08, trailer socket for 24-volt operation (15-pin), trailer coupling brand Rockinger, trailer version for operation with continuous braking system, fuel tank 390 liters, aluminum, end crossmember, D-value: 130 kN, trailer coupling, 40 mm, 130 kN, frame end edge protection, electrical connection for body on left side of frame, side marker lights, reverse warning buzzer (can be switched off), axle load indicator in cluster, hill holder for comfortable starting on slopes, LED rear lights, tire manufacturer: GOODYEAR - 315/70 R22.5 KMAX S GEN-2 (3PMSF), KMAX D GEN-2, printed operating and maintenance manual, young box body tail lift according to AN 200028995 + optional right side door, ...

Condition: ready for operation (used), Heidenhain VD030K AES2 card + Gildemeister 0.88.639-0 SI0ADP additional board, used, normal signs of use, 100% functional, scope of delivery as per photos Hfedstztgdjpfx Ab Nog

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. They do not sell independently. Hfodswyvh Rjpfx Ab Njg Collection from Patras, Greece (we have a fork lift truck to help if need)