Used Optimum L34 Hs Cnc for sale (12,146)

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Bjdpfoymlfkox Ad Aswl Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Bodpfxjymlhro Ad Aowl Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Bjdpfjymlf Rjx Ad Aswl Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: like new (used), Year of construction: 2018, Manufacturer: Optimum Maschinen Germany GmbH Model: L34HS Serial Number (SN): 11261804002 Machine Type: Flat-bed CNC Lathe Year of Manufacture: 2018 Motor Power: 3.7 kW Power Supply: 400 V / 50 Hz Spindle Speed Range: approx. 30 – 3500 rpm Maximum Spindle Speed: 3500 rpm Maximum Turning Diameter: approx. 350 mm Turning Diameter over Cross Slide: approx. 146 mm Distance Between Centres: approx. 600 mm Travel X/Y/Z-Axis: approx. 185 / 185 / 540 mm Taper / Mount: MT 3 Weight: approx. 1200 kg Bedpjy Ia Uqjfx Ad Aewl

Year of construction: 2018, condition: used, machine/vehicle number: 11261804002, Swing over cross slide approx. 146 mm; center distance approx. 600 mm, turning diameter approx. 350 mm, max. spindle speed approx. 3,500 rpm, spindle speed (min.): approx. 30 - 3,500 rpm, travel X/Y/Z approx. 185/185/540 mm, spindle taper: MT 3 Bedpoyztdrjfx Ad Aewl

Condition: new, Year of construction: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with accessories (new, unused condition): Includes accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 liters of cutting and drilling emulsion AQUACUT C1 - Preparation for 4th axis - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drives on all axes (closed loop) - Max. spindle speed 10,000 rpm - Machine lamp in the working area - Portable electronic handwheel with enable switch and emergency stop - Coolant system with 120-liter tank - Tool change is automatic or at the push of a button (electropneumatic tool clamping system) Dimensions and weights: Length approx. 2,164 mm Width/depth approx. 1,860 mm Height approx. 2,200 mm Weight approx. 2,800 kg Drilling/milling capacity: Max. face mill diameter: 70 mm Max. shank cutter size: 35 mm Rapid traverse speed: X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Electrical data: Supply voltage 400 V Network frequency 50 Hz Electrical connection: Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Distance vertical spindle to table min. 100 mm Bsdpoyxyhfsfx Ad Aswl Distance vertical spindle to table max. 600 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Coolant system: Coolant pump drive power: 650 W Tank capacity 120 l Pneumatic connection: Operating pressure 7 bar Travel range: X-axis automatic 550 mm Y-axis automatic 305 mm Z-axis automatic 460 mm Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 rpm Motor power (continuous duty S1) 7.5 kW Motor power (intermittent duty S6-30%) 11 kW Motor torque (continuous duty S1) 48 Nm Motor torque (30% duty cycle S6) 70 Nm Feed motor torque: X-axis continuous duty S1: 8 Nm Y-axis continuous duty S1: 8 Nm Z-axis continuous duty S1: 11 Nm Tool changer: Type: Carousel Number of tool positions: 12 Max. tool diameter: 70 mm Max. tool length: 300 mm Max. tool weight: 6 kg Tool change time (T to T): 7 s CNC Tool Starter Set BT 40: - 1 pc. face mill arbor, 27 mm mounting - 1 pc. keyless drill chuck 1.5 – 16 mm - 2 pcs. Weldon 6 mm / 20 mm - 1 pc. each Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1 pc. adaptor BT 40 to MK 3 - 4 pcs. collet chuck ER 32 - 1 pc. collet chuck wrench ER 32 - 18-piece collet set ER 32 - 1 pc. height adjustment device - 1 pc. assembly and tool presetting aid - 15 pcs. pull studs Hydraulic Milling Vise HCV 105: - Robust design for milling - Guide surfaces hardened and ground - Booster system: low effort, high clamping force when tightening - Wide clamping range with locating pin and various hole spacings - Manufactured from high-quality stainless steel - Long service life thanks to high quality - High clamping force Jaw height 42 mm Jaw width 107 mm Clamping width 170 mm Length without handle 442 mm Total height 107 mm T-slots 16 mm Clamping force 24.5 kN Clamping pressure 2,500 kg Dimensions and weights: Weight approx. 22 kg

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optiturn Premium CNC lathe directly from the manufacturer. Bodpfjymk Ukox Ad Aswl S600M – The OPTIMUM Premium CNC lathe equipped with a Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw measuring arm for manual tool measurement • Ball screw with enhanced precision, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for particularly large workpieces • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tool capability • Hardened and precision-ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling button and emergency stop impact switch greatly simplifies program setup • Belt-style chip conveyor • Worklight for complete illumination of the work area • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic turret head VDI 40 • All 12 turret stations powered by an integrated motor capable of speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree inclination • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with the door open • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant detection and machining • ShopMill step programming • Manage network drives • 3D simulation • Remote view/assistance SIEMENS OSS Plus Additional Package • 12 months; Item no. 3589020 • 24 months; Item no. 3589021 • 36 months; Item no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Area Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (factory option) Angular accuracy: 51 '' Repeatability: 20 '' Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed Range Speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Mount: MT 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle nose: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle taper: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical Spindle Drive motor power S1 continuous duty: 11 kW Drive motor power S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque S6-30%: 140 Nm Feed Force Feed force, X-axis: 8.4 kN Feed force, Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN 5480 Number of tool stations: 12 Drive motor power: 4.82 kW Max. permissible speed at tool coupling: 6000 rpm Max. tool torque: 20 Nm

Condition: as good as new (ex-display), Year of construction: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Dimensions and Weight: - Max. width/depth: 2300 mm - Approx. length: 2530 mm - Approx. width/depth: 1595 mm - Approx. height: 1795 mm - Approx. weight: 2600 kg Working Range: - Chuck diameter: 150 mm - Chuck clamping actuation: hydraulic - Centre height: 223 mm - Centre distance: 850 mm - Swing diameter over bed: 446 mm - Swing diameter over gap: 520 mm - Swing diameter over cross slide: 240 mm - Bed width: 300 mm Servo Torque: - X-axis: 6 Nm - Z-axis: 8.5 Nm Spindle Speed Range: - Number of speed ranges: 1 - Spindle speed range: 10 – 3000 rpm Electrical Data: - Drive motor power: 7 kW - Voltage: 400 V - Network frequency: 50 Hz - Total connected load: 23 kVA Accuracy: - Repeatability: ± 0.005 mm - Positioning accuracy: ± 0.005 mm Hydraulic System: - Motor power: 0.75 kW - Tank capacity: 50 l Ball Screw: - X-axis diameter: 25 mm - X-axis lead P: 5 mm - X-axis accuracy grade: C3 - Z-axis diameter: 40 mm - Z-axis lead P: 5 mm - Z-axis accuracy grade: C3 Coolant System: - Coolant pump power: 270 W - Tank capacity: 90 l Machine Data: - Spindle bore diameter: 40 mm - Drive motor torque: 33 Nm Tailstock: - Taper: MT 4 - Quill travel: 165 mm - Quill diameter: 52 mm Spindle: - Spindle nose: DIN ISO 702-1 No. 5 - Spindle bore/bar capacity: 52 mm Controller: - Type: Sinumerik 828D PPU 240 - System software: SW 24 - CNC memory: 3 MB - Look Ahead: 50 - Block change time: 3 ms - Number of tools: 128 Travel: - X-axis: 250 mm - Z-axis: 760 mm Vertical Spindle: - Drive motor continuous power S1: 7 kW - Drive motor S6-30% duty cycle power: 16 kW - Drive motor torque: 33 Nm - Drive motor torque S6-30% duty cycle: 80 Nm Feed Rate: - X-axis: 15,000 mm/min - Z-axis: 15,000 mm/min Feed Force: - X-axis: 7.5 kN - Z-axis: 5.3 kN Tool Changer: - Type: hydraulic; VDI 30 - Number of tool stations: 8 - Max. square tool shank height/width: 20 x 20 mm - Max. boring bar diameter: 25 mm Features: Bodpfx Adsymkwre Aswl - Siemens spindle and servo motors - Full enclosure with safety interlock - Standard with max. spindle speed up to 3000 rpm - Automatic central lubrication - Swiveling control panel - Tailstock cover - Electronic hand wheels for X and Z axes - Coolant system with 90-liter tank - RJ45 connection, USB port, and 230 V power socket - EMC (Electromagnetic compatibility) - Six leveling feet - Operator tools included SINUMERIK 828D Basic – COMPLETE PACKAGE - Safety Integrated - Remainder material detection and machining - ShopTurn step programming - Network drive management - 3D simulation - Graphical tracking Control: - 10.4” color display - 4:3 format - User-friendly SINUMERIK Operate software - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Guides: - Rigid flat-bed guideways Ball Screw: - For high rapid traverse speeds on all axes - Reduced wear - High positioning and repeat accuracy

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque Bedpjymkdxsfx Ad Aowl X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 80 CNC milling machine, direct from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by performance, speed, precision, and long service life. • Machine base constructed from cast iron for high rigidity • Carousel-type tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel featuring an enabling switch and emergency stop button makes program setup significantly easier Bedpfx Adeymkcue Ajwl • Coolant system with 70-liter coolant tank • Tool change performed automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, high-precision milling table – large dimensions and precision ground finish • Generously dimensioned access doors minimize cleaning and maintenance time • LED machine light for complete illumination of the working area SINUMERIK 808 ADVANCED Compact and robust Communication features: • Front USB port (IP65) • Serial RS232C interface • RJ45 Ethernet on rear panel User-friendly: • Technology-specific keyboard layout • Hard keys with protective membrane Process reliability: • LED tool number display • MCP with rotary switch for feed and spindle override Complete package: • RJ45 Ethernet port • Prepared for remote maintenance • AST function; allows simple optimization for enhanced dynamic and accuracy requirements • Absolute encoder / no reference run necessary • Higher precision Dimensions and Weight Length: approx. 1995 mm Width/Depth: approx. 1930 mm Height: approx. 1640 mm Weight: approx. 2300 kg Rapid traverse speed X axis: 20 m/min Y axis: 20 m/min Z axis: 20 m/min Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 12 kVA Horizontal Milling Table Length: 800 mm Width: 260 mm Distance vertical spindle – table, min.: 100 mm Distance vertical spindle – table, max.: 550 mm T-slot size: 16 mm Number of T-slots: 5 T-slot spacing: 50 mm Maximum load capacity: 200 kg Accuracy Repeatability: ± 0.01 mm Positioning accuracy: ± 0.01 mm Coolant/Lubricant System Coolant pump drive power: 450 W Tank capacity: 80 l Pneumatic Connection Operating pressure: 7 bar Travel X axis (automatic): 450 mm Y axis (automatic): 260 mm Z axis (automatic): 450 mm Max. spindle–column distance: 370 mm Vertical Spindle Spindle taper: BT 40 Speed range: 50 – 10,000 rpm Note: Maximum spindle speed must be reduced by approx. 20% during continuous operation Drive motor power S1 (continuous duty): 3.7 kW Drive motor power S6-30% duty cycle: 5.5 kW Drive motor torque S1: 24 Nm Drive motor torque S6-30%: 36 Nm Feed Motor Torque X axis S1: 6 Nm Y axis S1: 6 Nm Z axis S1: 11 Nm Tool Changer Design: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip tool change time: 7 s

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm Bedpoww Nb Sefx Ad Aowl max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - SHOW-ROOM-MACHINE

Condition: excellent (used), Year of construction: 2013, Used automatic band saw MEP SHARK 310 CNC HS Bwjdpfx Aeyyuxnsd Aol Blade dimensions: 4640x34x1.1 mm Variable blade cutting speed: 15–115 m/min Cutting capacity: round 310 mm, square 310x310 mm Automatic blade tensioner Automatic chip conveyor Additional equipment: vertical vise Machine weight: 2200 kg The machine is in excellent condition and will be fully inspected and serviced.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting Bjdpewnyu Defx Ad Aowl - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Bending angle: 145 degrees

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min Bwjdjfm T Hbopfx Ad Ajl total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: ready for operation (used), Industrial CNC router for sale – AXYZ Automation Group Automation Series 6010, fitted with a high-speed Perske GmbH spindle. This is a large-format production machine suitable for woodworking, plastics, signage, and light aluminium work. Solid gantry construction with vacuum bed – ideal for sheet materials. ⚙️ Key Specs Model: AXYZ 6010 (6000 Series) Bed Size: approx. 10ft x 6ft (3048 x 2150mm) Spindle: Perske high-speed spindle Power: approx. 4kW / 5.5HP Speed: up to 18,000 – 21,000 RPM Bed: Vacuum table (grid type) Axes: 3-axis gantry CNC Power: 3-phase Build: Heavy-duty industrial frame Bsdpfx Aoy A R Dxsd Ajwl

Condition: used, Year of construction: 2014, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: J02140918ER, turning diameter over cross slide: 300 mm, spindle bore: 30 mm, turning diameter over bed slide: 200 mm, center height: 169 mm, turning length: 430 mm, quill diameter: 30 mm, quill travel distance: 120 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Z-axis: 12,000 m/min, travel distance X-axis: 145 mm, travel distance Z-axis: 465 mm, chuck outer diameter: 300 mm, spindle motor power: 2,200 W, Turning machine (Lathe). Bodpjwnqk Aofx Ad Aowl

Condition: like new (used), Year of construction: 2019, functionality: fully functional, spindle bore: 30 mm, spindle speed (min.): 40 rpm, travel distance X-axis: 145 mm, travel distance Z-axis: 465 mm, rotational speed (max.): 4,000 rpm, center width: 650 mm, center height: 150 mm, load capacity: 1,200 kg, throat depth: 4,000 mm, For sale is a nearly new CNC lathe from OPTIMUM, model OPTIturn L28HS. The machine is in excellent condition. It comes from a vocational training institute (BFI) and was used exclusively for training purposes (setup and program transfer). Technical specifications: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Centre height: 150 mm Centre distance: 650 mm Swing diameter over bed: 300 mm Bwsdpfey D Hkqox Ad Asl Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mounting: ISO 702-1 No. 3, Form A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool changer: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Space requirements (L x W x H): 1,655 x 1,485 x 1,955 mm Note: Machine hours can be read on site if the necessary expertise is available. As the lathe was only used for training, a very low number of operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized throughout Europe at extra cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website.

Year of construction: 2009, condition: ready for operation (used), A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Bwedpfxsyyplij Ad Ael

Condition: as good as new (ex-display), Year of construction: 2022, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel Bsdpoynf Unefx Ad Aswl • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Bodpfeymka Hox Ad Ajwl Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: as good as new (ex-display), Year of construction: 2025, Machine is on display. Optimill F 200 HSC Premium CNC milling machine directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control system features high performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile rail guideways with roller bearings for high rapid traverse rates on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precision-ground milling table with five T-slots, large dimensions · The portable electronic handwheel with enabling button and emergency stop switch greatly simplifies program setup · Coolant system with chip flushing and cleaning gun · Internal spindle coolant with 20 bar pressure · Belt-type chip conveyor for efficient chip removal · Chip trolley · RJ45 connection socket and 230 V power supply · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dust particles · Work area machine light · Additional SIEMENS warranty package for material defects and free online/on-site service OSS Plus · 1 year Basic maintenance contract included in D/A/CH region Milling spindle: inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Drive motor torque S1 operation: 50 Nm Drive motor S6-30% duty cycle: 26.4 kW Drive motor torque S6-30% duty cycle: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system Coolant pump power, 3 units: 1 kW Delivery rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Maximum tool diameter: 78 mm Maximum tool diameter (adjacent stations free): 120 mm Tool length: 300 mm Maximum tool weight: 8 kg Tool change time: tool-to-tool 2.5 seconds Travel Bwedpfx Adjymd Hme Ajl X axis: 850 mm Y axis: 500 mm Z axis: 550 mm Feed drive Rapid traverse X, Y, Z axes: 48 m/min Drive torque motor X/Y/Z axes: 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axes: 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6–8 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–650 mm Table (L x W): 1,000 x 500 mm T-slot size/number/spacing: 18 mm / 5 / 100 mm Max. load: 500 kg Dimensions L x W x H: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg !!! Image shows optional setup with 3D printer, not included in the price !!!

Condition: as good as new (ex-display), Year of construction: 2025, Machine currently on display. Optimill F 300 HSC Premium CNC milling machine, direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control features outstanding performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with roller recirculation on all axes for high load capacity • High-torque servo drives directly coupled to the ball screws in all three axes • Precision-ground, preloaded high-performance ball screws for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm, inline spindle • Solid, precision-ground milling table with five T-slots, generously dimensioned • Portable electronic handwheel with enabling switch and emergency stop impact switch significantly simplifies program setup • Automatic tool changer with double-arm gripper, 30 tool stations • Coolant unit with chip flushing system and cleaning gun • Through-spindle coolant 20 bar • Belt-type chip conveyor ensures efficient chip removal • Chip cart • Oil separator • Machine light in working area • Additional SIEMENS warranty package and free online/on-site service (OSS Plus) • 1 year basic maintenance contract included for Germany, Austria, Switzerland • Control unit • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remainder material detection and processing • ShopMill operation step programming • Network drive management • 3-D simulation • Program tracing • Additional Siemens OSS PLUS package • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Equipment details Bwsdpfeymd Epox Ad Aol • Inline spindle • SK 40 / DIN 69871 spindle taper • Spindle speed 15,000 rpm Dimensions and weight • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA Milling table (horizontal) • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Maximum load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis (automatic) 1000 mm • Y-axis (automatic) 620 mm • Z-axis (automatic) 630 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Continuous operation motor power (S1) 20 kW • Motor power (S6-30% duty cycle): 52.4 kW • Continuous torque (S1): 96 Nm • Torque at 30% duty cycle (S6): 250 Nm Feed force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 12.01 kN Feed drive torque • X-axis continuous operation (S1): 20 Nm • Y-axis continuous operation (S1): 20 Nm • Z-axis continuous operation (S1): 36 Nm Tool changer • Double-arm gripper • Number of tool stations: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 seconds

Condition: used, Technical details: Bwodpfxou Ndcas Ad Asl x-travel: 200 mm y-travel: 450 mm z-travel: 460 mm control: Siemens 802S base line spindle taper ISO: ER 32 spindle head swivable left - right: nein ° turning speed range: 150 - 8600 U/min feed:: X/Y/Z: 2000 - stufenlos mm/min table surface area: 750 x 210 mm interface: 232 total power requirement: 3 kVA weight approx.: 760 kg dimension machine xH: 1,9 x 1,2 x 2,1 m Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control unit cooling system central lubrication machine interior lighting Machine feet *

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WE OFFER AND VERY NICE CONDITION SURFACE GRINDING MACHINE READY TO WORK. MACHINE WILL BE READY FOR PICK UP IN MIDLLE OF FEBRUARY 2026 FULLY DATA IN PHOTO-TECHNICAL DETAILS TECHNICAL DATA Table surface dimensions: 700 x 1020 Max table Travel: 760 x 1150 Bwsdpeydrhgefx Ad Ael Max Distance Center of Spindle table: 600mm Table speed Approx: 5-25 M/min

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Bedpjkqz H Djfx Ad Ajwl