Used P. Bacci Vertical Wood Machining Center for sale (94,061)

Condition: used, Year of construction: 2001, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 5,000 kg, We offer this used P. BACCI DOUBLE vertical woodworking machining centre, year of manufacture 2001. Bodpfx Ajyx S Svoggown Model: DOUBLE Serial number: AB001 Year of manufacture: 2001 Voltage: 380 V Frequency: 50 Hz Power: 25 kW Weight: 5000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center For sale is a very well-maintained HOLZ-HER Evolution 7405 White Edition, year of manufacture 2016. Bedpfxey Sicxs Aggjwn The machine is in excellent technical and visual condition and can be demonstrated under power. A particular highlight is the exceptionally low processing time: only 788 hours with active feed. The machine was professionally serviced and completely recalibrated by the manufacturer in 2021. Since then, it has seen only limited use and runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of manufacture: 2016 Serial number: 7405_408 Software / Controls CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active feed / Processing hours: only 788 h Machine ON: 6,723 h Features 4-MAT configuration Drilling unit with 15 spindles Saw and grooving unit Milling unit with 6-position tool changer Handheld control device Vertical and horizontal processing Vacuum clamping system Ideally suited for: Furniture production Interior fittings Kitchen construction Joineries CNC entry or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally recalibrated by the manufacturer in 2021 Minimal use since recalibration Immediately ready for operation Runs very cleanly and precisely No known technical defects Machine can be inspected and tested during operation Availability Available from calendar week 25 / 2026 Inspection possible by appointment Support with loading and transport organization available Price Asking price: €43,900 net

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Bwjdpeyvh Dpjfx Aggon

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Bwodpfxjyzadre Aggen

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000028110, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 2,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, For sale: Premium vertical CNC machining center. The machine was purchased new; we are the first and only owners, ensuring a clear maintenance and usage history. The machine is in fully operational condition, exceptionally well maintained, and requires no further investment. - Working range x/y/z: 2600-900-60 mm Bwodpfx Aey Sfw Ejggsn - Working head with BH17 drilling head (10 horizontal and 6 vertical drills) - Speed up to 65 m/min - BSolid control - Automatic dimension reading via laser

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 221/2-306, functionality: fully functional, operating hours: 207 h, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, workpiece length (max.): 1,000 mm, number of axes: 3, number of slots in tool magazine: 4, total height: 2,500 mm, total length: 1,500 mm, total width: 2,500 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediately High-performance industrial vertical CNC machining center suitable for milling furniture carcasses and other components from wood and laminated panels. Key Features - Vertical machining with highly accurate vacuum positioning system (including complimentary vacuum pads) - Rear clamping for processing all edges of the workpiece, enabling complete machining without repositioning - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible power supply for computer unit Technical Specifications - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: - Vector: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining Unit - 10.3 kW electrospindle (air-cooled) - HSK-F63 tool holder - 4-position tool magazine - XL boring unit – 19 drilling spindles (13 vertical, 6 horizontal) - Groove saw in Y-direction Software and Control - Complete CAMPUS V7 EVOLUTION CAD/CAM software Bodoy Eygnepfx Aggjwn - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment - ECO vacuum system (8 m³/h)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1000017221, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, controller model: BSuite3, number of spindles: 17, TECHNICAL DETAILS Working area X-axis: 2,500 mm Working area Y-axis: 900 mm Working area Z-axis: 60 mm Number of axes: 3 Tool: ISO 30 Spindles Bwodpjyzpcdefx Aggon Total number of spindles: 17 6 vertical in X-axis 5 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis MACHINE DETAILS Numerical control: BSolid Software - BSuite3 EQUIPMENT Automatic unloading device Integrated blade for groove insertion Front protective and safety systems with mats Perimetric protective grids External reference: MME002

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 1000058013, functionality: fully functional, operating hours: 1,225 h, Equipment: CE marking, documentation/manual, ENGLISH SPOKEN NOUS PARLONS FRANCAIS Manufacturer: BIESSE Model: BREMA EKO 2.2 Year of construction: 2022 Condition: very good Category ID: 2502 Type ID: 4257 Type: vertical wood machining center We offer this very good BIESSE BREMA EKO 2.2 vertical wood machining center, year of construction 2022. The machine was sold new in october 2022 together with a Biesse B-solid software for a total price of €120.000 excl. VAT. The machine only has 1225 working hours, it is sold with all the tools seen on the pictures, which make it a bargain ! Please keep in mind we sell the machine in "used" condition. We sell it as a user, therefore no warranty can be offered on the machine. We'll be happy to load it on a truck and even organize the shipment when required. If you have any questions or need more information, feel free to send us a message or give us a call. Notre entreprise de menuiserie vend cette très belle machine Biesse EKO 2.2 qui a peu servi 1225 heures de travail seulement Bwedpfx Agoyu Nulogjn La machine est très bien équipée et sera vendue avec le logiciel B-suite de Biesse, et tout l'outillage qui est présenté sur les photos. C'est une affaire à ne pas rater ! Prix neuf en octobre 2022 : 120.000€ HT La machine est vendue sans garantie car nous ne sommes pas revendeurs de machines-outils, nous sommes une entreprise de menuiserie. Nous pouvons organiser le transport et charger la machine sur un camion.

Condition: good (used), Year of construction: 1997, functionality: fully functional, We offer an nice condition Matsuura with tools and accessoriess, very atractive machine for a serious work. Description Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Bwedpfjvkx Rkex Aggen Country of Origin: Japan. Spindle Chiller WASTE CONVEYOR with Yasnac i80M Control 20 Position: ATC BT40 : Taper Specifications Manufacturer MATSUURA Model MC600VF Year 1997 Condition Used Serial Number 970112285 Table size 870 x 400mm Coolant tank X = 600 Y = 410 Z = 470mm Spindle speeds 30 – 15000 rpm.

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. Bedpfxoxc I Dgo Aggswn As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Fagor 8055/FL, spindle speed (max.): 1,200 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 850 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 450 mm Spindle speed (max.): 1,200 rpm Spindle speed (min.): 30 rpm Table width: 530 mm Table length: 900 mm T-slots: 14 mm wide, spaced at 60 mm Table load capacity: max. 400 kg MACHINE DETAILS Control system: Fagor 8055/FL Input voltage: 380 V Input current: Three-phase Connected power: 56 kW EQUIPMENT Bjdpey Tv Auofx Aggjwn Documentation/Manual Various tool holders and tools

Condition: used, Year of construction: 2021, EMAG VMC 450 MT Mfd. 2021 Control: Siemens 840D SL Machine has no production hours Description CHUCK DIAMETER: 24" MAX WEIGHT: 1100 LBS. MAX SWING DIAMETER: 31" MAX TURNING DIAMETER: 23.5" X STROKE: 30" Z STROKE: 19" MAIN DRIVE: POWER: 100 HP FULL POWER AT 800 RPM MAX SPINDLE RPM: 2,000 C AXIS POSITIONIONG TO .01MM ANGULAR DEGREES FEED DRIVE: RAPIDS Z / Z: 60 / 30 M / MIN. FEED FORCE X / Z 4 / 15 kN BALL SCREW DIAMETER X / Z: 40 / 50 MM MILLING SPINDLE: POWER: 100 HP MAX SPINDLE SPEED: 7000 RPM SPINDLE TAPER: CAPTO C8 TOOL MAGAZINE: 60 EQUIPPED WITH: MINERALIT MACHINE BED SIEMENS 840 D SL FULL ENCLOSURE LEVEL PADS TURN MILL DRIVE EMAG WORKPIECE CORRECTION SYSTEM EMAG OPERATING AND SETTINGS MASKS EMAG REMOTE DIAGNOSIS Y AXIS B AXIS +/- 95 DEGREE 1000 PSI COOLANT THROUGH TOOL X-AXI CLAMPING FOR GEAR TOOTH FORMING SWARF CONVEYOR, CHAIN TYPE - REAR DISCHARGE LIFTING PUMP Bsdpfx Asyzkdveggown PAPER FILTER LOW PRESSURE COOLANT HIGHT PRESSURE COOLANT 1000 PSI PROGRAMMABLE COOLANT PRESSURE COOLANT MIST EXTRACTOR AIR BLAST CHIP FLUSH QUALITY CONTROL: WIRELESS GAUGING CALIBRATION BLK FOR PROBE TOOL GAUGING - BLUM LASER

Condition: used, Spinner MICROTURN 52 LTBS Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles AUTOMATION READY - MC0122 Less than 300 hours No bar feed Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling Chucks etc. included Yes Coolant: used Water Based What kind of facility is it in? R and D for performance parts for injector and turbos Specifications Work Area: Swing Diameter: 23.9 in (608 mm) Turning Diameter (max): 5.9 in (150 mm) Turning Length(max): 9.8 in (250 mm) Travels: X: 23.6 in (600 mm) Z:13.8 in (350 mm) Y1 Turret: +/- 1.9 in (50 mm) Y2 Milling Spindle: +/- 1.9 in (50 mm) B Rotary: 180 degrees Feedrate: Rapid Traverse X: 944.8 ipm (24 m/min) Rapid Traverse Y: 590.6 ipm (15 m/min) Rapid Traverse Z: 944.8 ipm (24 m/min) Spindle #1 Left / #2 Right: Liquid cooled motorized spindle with C-axis servo drive and encoder for synchronous machining. Spindle Bore Capacity: 52mm (2.0 in) Speed: 5,200 rpm Performance (S6 40%): 22.1 hp (16.5 kW) Torque (S6 40%): 81.1 ft-lb (110 Nm) Spindle Nose: DIN 55026-A6 Bsdpfx Aoyzkdcjggswn B-Axis Milling Spindle: Speed (max): 12,000 rpm Performance (S6 40%): 12 hp (9 Kw) Torque (S6 40%): 15.4 ft-lbs (21 Nm) Swivel Angle: +/- 180 degrees Positional Measurement: Rotary Encoder Clamping: Hydraulic Turret: Stations: 12 / BMT45 Live Tooling Speed: 8,000 rpm Performance (S3 25%): 5.8 hp (4.3 kW) Torque (S3 25%): 10 ft-lb (13.6 Nm) Tool Magazine: Station Quantity: 72 Holder Type: HSK40 Tool Length (max): 4.1 in (105 mm) Tool Diameter (max): 3.5 in (88 mm) Tool Diameter (max) - Adj Pocket Empty: 3.9 in (100 mm) Size & Electrical: Technical design according to CE standards. Machine Dimensions: 119.3 in (3030 mm) x 111.8 in (2840 mm) x 113.8 in (2890 mm) Machine Weight: 16,976 lbs (7,700 kg) Operating Voltage: 3 x 400V (+/-10%) Main Frequency: 60 Hz (+/- 2%) Electrical connection: TN network (5-wire) Standard Equipment • 72-station tool magazine mounted on top of the machine • Hydraulic spindle brake on spindle 1 • Hydraulic spindle brake on spindle 2 • Spindle rinsing on spindle 1 (switchable between coolant or compressed air) • Spindle rinsing on spindle 2 (switchable between coolant or compressed air) • CNC Clamping Force Setting on Spindle 1 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • CNC Clamping Force Setting on Spindle 2 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • Linear tool slide with coolant supply • Signal lamp • Rear exit chip conveyor - includes feed pump rated at 5 bar at 20l/min or 3.7 bar at 83l/min • High pressure coolant system with additional 61 gallon (230 liter) tank. Maximum 319 psi (22 bar) • Renishaw tool probe for measuring tools in the X/Y/Z axis • Preparation for mist collector unit • Automatic operator door that opens at the end of the program and closes with the start. Includes necessary safety technology. Suitable for manual loading or automation access. • UNIROB universal robot interface via a common plug on the machine control cabinet with the following signals: • Safety signals (emergency stop/door signals, etc.) • Standard signals via Profinet PN bus coupler on RJ45 module. Otherwise according to the Unirob-V2021 functional description CNC Control System

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Spindle power 24Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control. Bwsdpfx Agjzbkm Nsgen

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 660mm x 406mm x 508mm, Bsdpfjzbitzex Aggjwn table size 762mm x 356mm, 10000rpm spindle, 20 station ATC, BT40 spindle taper, Hurco WINMAX control, coolant.

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Bwodpfxszbitue Aggjn Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z 800 x 450 x 510mm, Bjdpfx Aezbhv Ijggown table size 1000 x 450 mm, table load 600KGS, spindle taper BT40, spindle speed 12,000rpm, 30 station ATC, spindle power 18.5/11Kw, Through spindle coolant, Siemens 828D control

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm Bwodpfxszair Ue Aggen X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Bwedpfey St Sdex Aggsn Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, feed length X-axis: 450 mm, feed length Y-axis: 400 mm, feed length Z-axis: 300 mm, nominal power (apparent): 12 kVA, controller manufacturer: Fanuc, controller model: Oi-MC, workpiece weight (max.): 200 kg, total height: 2,460 mm, total length: 2,100 mm, total width: 1,980 mm, table width: 320 mm, table length: 720 mm, table load: 200 kg, overall weight: 2,000 kg, spindle speed (max.): 10,000 rpm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 12, tool diameter: 75 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 🟦 2007 Dugard Eagle 450XP CNC Vertical Machining Centre | Fanuc Oi-MC | 12 ATC 🔧 Machine Details Manufacturer: Dugard Model: Eagle 450XP Year: 2007 Type: CNC Vertical Machining Centre (VMC) Control: Fanuc Series Oi-MC Condition: Good 💡 Description 2007 Dugard Eagle 450XP CNC Vertical Machining Centre equipped with Fanuc Oi-MC control, offering reliable and precise machining performance. This compact VMC is ideal for precision engineering, toolmaking, and general machining applications, combining high speed, accuracy, and a small footprint. The 12-station tool changer and rigid tapping make it a versatile and efficient machine for a wide range of jobs. ⚙️ Technical Specifications Table Size: 700 x 320 mm Max Table Load: 200 kg 📏 Travels X Axis: 450 mm Y Axis: 400 mm Z Axis: 300 mm ⚡ Spindle Bwsdpsy Ittmofx Aggsn Spindle Speed: 10,000 rpm Spindle Taper: BT40 🔄 Tool Changer Type: Carousel ATC Stations: 12 Max Tool Diameter: 75 mm Max Tool Weight: 6 kg Tool Change Time: 6 seconds ⚙️ General Data Machine Size (L x W x H): 1980 x 2100 x 2460 mm (approx) Weight: 2,000 kg 🧠 Features Compact high-speed machining centre Rigid tapping capability Fully enclosed splash guarding Heat exchanger for electrical cabinet Reliable Fanuc CNC control (industry standard) Compact footprint – ideal for smaller workshops Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility Bodpfxjwwau Nj Aggjwn All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. Bwsdpoyfh Ixefx Aggjn This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Bwedeyfh H Uspfx Aggsn Table Table Size: 1200 × 540 mm Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Overall Height: 2703 mm Machine Weight: 6,500 kg Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1087278, SPECIFICATION Table size 1321mm x 457mm X axis traverse 1270mm Y axis traverse 508mm Z axis traverse 635mm Spindle BT40 Spindle speeds 0-12000rpm Spindle motor 22.4kW Rapid feed rate 35.6m/min Toolchanger capacity 40 + 1 tools Bsdpjzbhn Rjfx Aggswn Approx. weight 6033kgs MACHINE EQUIPPED WITH: - HRT 210 4th axis Through spindle coolant Swarf auger Lighting Guarding Manual

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23087A, SPECIFICATION Bedpfx Asvntguoggown Maximum grinding surface 140 x 300mm Distance between column and wheel axis 300mm Max.distance between table and wheel 280mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0.01mm Size of cup wheel 2.2kW Wheel speed 2840rpm Approximate weight 400kg MACHINE EQUIPPED WITH 260mm x 140mm x75mm (thickness) magnetic chuck Coolant system Guarding