Used Parcitank S.a. Gär- Und Lagerkeller for sale (6,921)

Condition: used, Year of construction: 2002, Overview  This tank package was manufactured in 2002 by Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for fermentation or storage depending on their configuration. The set is offered as three packs, each consisting of one 20,000 L fermentation tank, one 15,000 L storage tank, and one 10,000 L storage tank. On request, single packs can also be purchased. All tanks are made of AISI 304 stainless steel and are in good condition. Technical data  Fermentation tanks - 200hl (3 units): Capacity: 20,000 L Diameter: 2,500 mm Cylindrical height: 4,000 mm Type: Atmospheric with cooling jackets Storage tanks - 150hl (3 units): Capacity: 15,000 L Diameter: 2,500 mm Cylindrical height: 3,000 mm Type: Atmospheric Storage tanks - 100hl (3 units): Capacity: 10,000 L Diameter: 2,000 mm Cylindrical height: 3,000 mm Type: Atmospheric Material: AISI 304 stainless steel Scope of Delivery 9 stainless steel tanks (3 × 200 hl, 3 × 150 hl, 3 × 100 hl) Optional: Sale in complete set or in 3 individual packs (1 × 200 hl + 1 × 150 hl + 1 × 100 hl) Psdpfxoxbua Sj Ag Djgk

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA Manufacturer: TMCI Padovan Year of Manufacture: 1994 Quantity: 2 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 150 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm Podpfoy Hknxox Ag Dsgk

Condition: used, Year of construction: 1992, Overview These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is required, depending on usage and product type. Technical Data Manufacturer: TMCI Padovan Year of Manufacture: 1992 Quantity: 4 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 200 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank): Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 7,000 mm Total Height: approx. 9,000 mm Psdpfxjy Hkl Do Ag Dogk

Condition: used, Year of construction: 1985, Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Technical Data Manufacturer: TMCI Padovan Year of Manufacture: 1985 Quantity: 5 units Type: Pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 100 hl per tank Material:Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank):Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 4,000 mm Podpfoy Hkkyex Ag Djgk

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of Manufacture: 2005 Quantity: 8 units Type: Isobaric pressure tank Application: Fermentation, maturation, storage of carbonated beverages Capacity: 500 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet Working Pressure: 6 bar Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm Pjdpfx Agjy Hkkae Dogk

Condition: used, Year of construction: 2018, Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  Capacity: 10 hl each Application: Beer fermentation Configuration: 3 × iso fermenters   Pjdpfx Ageywn Svj Degk

Condition: used, Year of construction: 2012, Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L   Podpfx Ajyg R Aueg Dsgk

Condition: used, Year of construction: 2014, Overview  This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  Capacity: 6 x 1,000 liters Working pressure: up to 3 bar Diameter: approx. 125 cm Height: approx. 190 cm Base design: conical base with 30° angle Type: Isobaric fermentation and maturation tanks with cooling jacket With integrated cooling jackets With decorative wooden cladding (removable) Scope of delivery  6 x Talleres Perman DI1 | Year of construction 2014 isobaric fermentation and maturation tanks Pjdpfjwzb T Uex Ag Djgk

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Podpfowkfwpex Ag Dsgk

Condition: used, Year of construction: 2012, Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 | Horizontal isobaric with carbonation stones Pgjdpoyb S A Sofx Ag Dsk

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new Podpeyb S Dvjfx Ag Dsgk

Condition: reconditioned (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 Multisensor Measuring System equipped with camera, laser, Renishaw probing system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible) Complete maintenance history available Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery via factory service or forwarding agent, worldwide. Online or optional on-site demonstrations with customer parts, application-specific consultation by accredited Profitech metrology laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification to standard, certification, and extensive acceptance documentation. Individual training and education programs also available as online courses. Rental, hire-purchase, or financing available directly through Profitech without a financial institution. Measuring system can be individually configured to customer requirements. Pgjdpoxufk Ujfx Ag Dsk Measuring range for all sensors: 400x400x200 mm Dimensions: 800x1000x2000 mm Weight: approx. 800 kg Maximum load (glass plate): 30 kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. traverse speed: 250 mm/s Including camera Including rotary table Including laser Including LED ring light Including new frame grabber Including dual-monitor operation Including CNC control and PC Including Hexagon Vision3D software

Condition: good (used), Year of construction: 2011, Proofing cabinet, dough divider, moulder, folding and rounding machine Keilmeijer, year of manufacture 2011, complete line immediately available. Serviced with operating manual. Pgedpeyy S Tcjfx Ag Dsk

Condition: used, mileage: 158,000 km, power: 110 kW (149.56 HP), first registration: 01/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,500 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Pgedpfx Aowzrdqog Djk Quick & easy contact with our sales advisor. Attention!!! Sale preferably to commercial customers. Internal ID Number: [ 2989 ] ----Optional add-ons: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available, also with no down payment * Reversing camera/tow bar can be retrofitted on request! ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly serviced * 2nd owner * Euro 5 emissions standard * High roof + long wheelbase (L2-H2) * Air conditioning * Cruise control * Towing capacity = 3,000 kg * Ready for immediate use Further equipment: Overhead storage compartment in cab, driver airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, on-board computer, brake pad wear indicator, driver assistance system: emergency braking assist, windscreen with upper band filter, 130 A alternator, rear wing doors (opening angle 180 degrees), body/build: standard high-roof van, black radiator grille, cargo partition wall without window, steering column (steering wheel) adjustable in height and reach, engine 2.5 L – 110 kW CRDi CAT, radio preparation, 2 speakers, wheelbase 3,435 mm, tyre repair kit, particulate filter, low emissions compliant with Euro 5, right-side sliding door (cargo/passenger compartment), front and rear mud flaps, driver’s seat height adjustable, seat cover/upholstery: fabric/artificial leather, seats in cab: dual passenger seat, start/stop system, 3 x 12V sockets in cab, electronic immobiliser, central locking with remote control, permissible gross weight 3.5 t Looking for leasing or financing? We offer attractive deals – also possible with no down payment! Please feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is defined exclusively in the purchase contract on site or through written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 88,000 km, power: 110 kW (149.56 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,515 mm, total width: 2,038 mm, total height: 2,685 mm, loading space length: 3,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Preferential sale to commercial customers. Internal ID number: [2947] ----Optional extras available: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV (MOT) & emissions test * Nationwide delivery * Financing available, even without down payment ----Vehicle Highlights: * 19% VAT deductible * German vehicle * Service history included * Regularly maintained * Accident-free * 2nd owner Pgsdpfoxvwy Dex Ag Dsk * High roof + long wheelbase (L2-H2) * Tow bar (3,000 kg) * Automatic climate control * Cruise control * Bluetooth multimedia function * Reversing camera including parking assist * Additional features: Overhead storage in cab, driver’s airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, onboard computer, brake pad wear indicator, driver assistance system: emergency brake assist, windscreen with top band filter, 130 A alternator, front cupholders, rear wing doors (opening angle 180°), body/variant: high-roof panel van, black radiator grille, load compartment partition without window, height/lumbar adjustable steering column, engine 2.5 L – 110 kW CRDi CAT, radio pre-installation, 2 speakers, wheelbase 3,435 mm, tire repair kit, particulate filter, low emissions (Euro 5 standard), right-side sliding cargo/passenger door, front and rear mud flaps, height-adjustable driver’s seat, seat covers/upholstery: cloth/artificial leather, cab seats: double passenger bench, start/stop system, 3x 12V power sockets in cab, electronic immobilizer, remote central locking, permitted gross vehicle weight 3.50 t ----Leasing or financing required? We offer attractive packages — even with zero down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All information provided online is non-binding and only serves as a general description of the vehicle. Errors, typos, and prior sale excepted. The binding vehicle specifications result solely from the in-person purchase contract or from confirmed written assurances. Vehicles with mileage over 50,000 km or older than 3 years are preferentially sold to commercial customers.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Tilting Spindle Moulder KÖLLE F45 with power feed and integral fence Very good condition; the machine comes from a small model making workshop and has only seen light use. Everything works perfectly. All bearings and guides are in proper condition; the machine runs extremely smoothly. Year of manufacture: 1992 The moulder fence features one adjustable jaw with fine adjustment and scale, enabling jointing operations such as for gluing profiles. The entire fence can also be accurately and quickly adjusted in depth via a handwheel and leadscrew, with the milling depth displayed digitally. Spindle locking by lever. The machine is equipped with an eye-level control panel. Fitted with AIGNER integral fence. Efficient chip extraction with two extraction ports (125 mm and 100 mm). Equipped with a 30 mm spindle, continuously tiltable from -5 to 45°, tilting is electrically operated; for fine adjustment, there is a handwheel and digital readout. A 40 mm spindle can also be installed. Reverse/forward rotation capability. Podpfjy Hxtpsx Ag Djgk Nationwide personal delivery and demonstration within Germany for €220, eliminating all risk on purchase. Shipping to Austria and other EU countries available on request. Large table opening, adjustable by multiple insert rings (enabling use of both large and small diameter cutters with optimal safety). Spindle speeds: 3000, 4000, 5000, 6000, 8000, and 10,000 rpm. Spindle height adjustment is also electric, with fine adjustment via handwheel and digital readout. Includes 2200 mm long extendable auxiliary support. Very robust and durable construction, built for heavy-duty milling tasks and suitable for all routing operations. Optimal power transmission via belt drive system. Supplied with operating manual. Includes 4-roller HAFFNER power feed, model 904. The feed unit features forward/reverse operation and 4 speeds, with individually mounted feed rollers. Machine table is 1200 mm wide and 1000 mm deep, with 500 mm table extensions on both left and right sides. Ready to use immediately. 380V, 6000 and 8600W motor thanks to two speed ranges; fitted with a heavy-duty motor. Comes with all necessary safety features, including motor brake and emergency stop. The machine is certified by the Woodworkers' Professional Association and carries the GS tested safety mark. Weight: approx. 1000 kg Fitted with motor overload protection. Professional-grade machine, not DIY store quality. Optimal, simple, fast, and safe handling.

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 479 6475, Welding Machine Data: Model: MSE-III-F-EP-SB-200-250 Machine no.: 7739 Year of manufacture: 2002 The welding machine is equipped with: - All welding times can be set according to profile requirements. - Welding accuracy: 0.2 mm on the external dimension. - Clamping plates heated with interchangeable limit stops on the welding mirrors. - Automatic, movable limitation stops (white: 1.2 mm, colored: 0.5 mm). - Shims with adjustable gasket knives. Pgsdsy Eyqtepfx Ag Djk - Gasket former for shaping and notching the inside corners. - Minimum welding dimension with thicker shims: 330 x 500 mm. - Maximum welding dimension: 3800 x 3300 mm. - Heads retract for easy profile insertion. - Set to 5 mm welding bead (2.5 mm on each side). The cleaner is equipped with: - Four-axis cleaning unit for rapid finishing operations. - Automatic turning station with a gripping arm for gentle rotation of large, heavy elements. - Automatic turning for elements up to 3,000 x 3,000 mm. - Manual operation without the cleaning unit for small elements or U-frames. Top tool carrier: - Gasket groove milling cutter. - V-groove peeling knife. - Peeling knife for 3 mm grooves. - Inside corner knife, standard projection. - Inside corner knife, rounded projection. - Inside corner knife with groove. - Horizontal secondary milling for central gasket. Bottom tool carrier: - V-groove peeling knife. - Peeling knife for 3 mm grooves. - Gasket groove milling cutter. - Inside corner knife, standard projection. - Inside corner knife, rounded projection. - Peeling knife for half-offset surfaces. - Outer contour disc for external corners. The machine is set up for the BluEvolution 82 system by Salamander and Elegante by Deceuninck. The machine is sold for pickup and self-dismantling only. Sale only to business customers.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: AL-X20390, conveyor belt width: 1,500 mm, total width: 1,690 mm, overall weight: 68 kg, input voltage: 400 V, Equipment: type plate available, Air-cooled portable heating press for welding PVC/PU conveyor belts up to a width of 1500 mm and a thickness of 5 mm. Model GAMMA 1500 manufactured by FONMAR. Weight: 67.8 kg. Width: 1690 mm. 400V. The device is unused. Podjydb Ucopfx Ag Dogk

Condition: used, mileage: 126,800 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 06/2018, emission class: euro6, energy efficiency: A, color: blue, suspension: steel, number of seats: 7, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, EJ9 COMAND Online, Q50 Towbar with removable ball head, JA7 Blind Spot Assist, T56 Electric operation for left sliding door, T55 Electric operation for right sliding door, EY5 Mercedes-Benz emergency call system, EY4 Remote Online, G42 7G-TRONIC PLUS transmission, CM2 Bumper and add-on parts painted in body color, FS5 Illuminated mirrors in sun visors, JS1 360-degree camera, FC1 Electronic key in chrome look, JK5 Instrument cluster with color display, LG2 LED Intelligent Light System, LG4 Rear, brake, and indicator lights in LED technology, EZ6 Parking Package with 360-degree camera, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ7 Active Parking Assist, T70 Child safety locks on passenger compartment doors, T74 Entry grab handle, HH4 THERMOTRONIC automatic climate control, UR1 Seat rail system with quick-release fastener, V33 Carpet flooring in the rear, V36 Roof lining, Y10 First-aid kit, MJ8 ECO start/stop function, IB6 Model series C447 Vito/V-Class, RL8 Alloy wheels 7 J x 17, MB6 Emissions class Euro 6b M/N1 GR. II, HY1 Radio remote control for auxiliary hot water heater, ES3 12V sockets for rear passenger seat rows left and right, ES2 12V socket in trunk/load compartment, VD5 Interior roof trim in crystal gray, H00 Warm air duct to passenger compartment, MS1 CRUISE CONTROL, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W64 Separately opening rear window, US4 3-seater comfort bench EASY-ENTRY in 1st row rear, V44 Carpet flooring in front interior, RM4 Comfort tires, W68 EASY-PACK tailgate, Z42 Registered as passenger car, US9 Comfort seat in 2nd row rear right, US8 Comfort seat in 2nd row rear left, LA2 Light assistant, RM7 Summer tires, HZ0 Electric auxiliary heater, C74 Illuminated Mercedes-Benz entry badge. You can reach us by phone Monday to Friday until 8:00 p.m. and Saturday until 4:00 p.m.! Further information: Leasing/Financing and trade-in possible! Pgodpfx Aoy E Hivjg Dsk Errors and prior sale excepted! All details without guarantee ... more on our homepage

Condition: good (used), Year of construction: 2006, CNC Multitron PS 10 Control: Psdpev I Rfuefx Ag Degk Column-guided Material roller conveyor on both sides 4000 mm / 1000 mm Cutting speed 15 - 105 m / min Technical details Cutting diameter 320 mm Saw blade length 3280 mm Cutting width 320 mm Total power requirement 3.8 kW Machine weight approx. 115

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) Pgedpfsykuh Njx Ag Djk ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: reconditioned (used), functionality: fully functional, Stock No.: 2858 1 used, partially overhauled and function-tested compounding and pelletizing line, consisting of: Extruder Berstorff (Krauss Maffei) Type ZE 60 A - 34 L/D twin-screw co-rotating Extruder drive 160 kW AC Degassing with vacuum pump Laser cutting head / melt filter Melt pump Eprotec Melt x10 ECON EUP 600 underwater pelletizer, complete with start-up valve water system Pjdpfx Agey At Iao Djgk granulate drying centrifuge >> 1 year PLASTICO warranty OPTIONAL for an additional charge: Material conveying system Gravimetric dosing units Granulate classification Pellet filling station for Big Bags or Octabins Additional compounding plants, pelletizing systems, gravimetric dosing units available from our Wuppertal facility. Visit us or send us your enquiry.

Condition: used, Year of construction: 2021, functionality: unexamined, tank capacity: 240 l, Multipurpose Autoclave 240 l Manufacturer: Panzer Cooking and Smoking Systems Model: 240 l Year of manufacture (as per nameplate): 2021 Heating: electric Voltage: 400 V Pressure: 2.5 bar Accessories: 3 x 1/3 height stainless steel insert baskets 1 stainless steel base plate Fully automatic MIC 900 control system Net purchase price €16,500 plus applicable VAT. VAT will be shown separately on our invoice. Subject to change, errors, and prior sale. Sale without warranty or guarantee, to business customers only. Pgsdpoy Anu Iefx Ag Djk Enquiries will be processed Monday to Friday from 8 am to 4 pm.

Condition: used, mileage: 5,000 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 11/2024, emission class: euro6, color: silver, suspension: steel, number of seats: 7, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, Z3N Night Package, Q50 Tow Bar with Removable Ball Head, FB4 AMG Spoiler Lip on Tailgate, F2W Winter Package, JA7 Blind Spot Assist, T56 Electric Operation for Left Sliding Door, T55 Electric Operation for Right Sliding Door, EY5 Mercedes-Benz Emergency Call System, BS1 Brake Calipers with Mercedes-Benz Lettering, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, FK5 Black Anodized Trim Strip, LG4 LED Tail, Brake, and Indicator Lights, SE1 Active Seat Ventilation for Front Passenger, SE0 Active Seat Ventilation for Driver, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Lumbar Support Driver’s Seat, SE4 Lumbar Support Front Passenger Seat, QA4 Towing Capacity 2500 kg, T70 Child Safety Locks in Passenger Compartment Doors, ZC6 Sales Identifier 1, T74 Entry Grab Handle, Y10 First Aid Kit, MJ8 ECO Start-Stop Function, IB6 Model Series C447 Vito/V-Class, 805 AEJ X4/1, VL7 AMG Floor Mats, H00 Warm Air Duct to Passenger Compartment, C6L Multifunction Steering Wheel, Z42 Registered as Passenger Car, C74 Illuminated Mercedes-Benz Door Sill, J55 Seat Belt Warning Device for Front Passenger, H16 Heated Seat for Driver, H15 Heated Seat for Front Passenger, XA5 Weight Variant 3,200 kg, RF1 Tire Brand: Continental (10 units), SH2 Thorax-Pelvis Sidebag for Front Passenger, SH1 Thorax-Pelvis Sidebag for Driver, SH8 Windowbags for Driver, Front Passenger and Rear, H20 All-round Heat-Insulating Glass, JW8 ATTENTION ASSIST, PS2 AMG Line, Y44 Warning Triangle, ZG2 Permanent All-Wheel Drive, JX2 Maintenance Interval 40,000 km, FP3 Mirror Package, BH1 HOLD Function, XC8 VIN Visible From Outside, SZ8 Storage Net on Front Passenger Seat Backrest, SZ7 Storage Net on Driver Seat Backrest, JH3 Communication Module (LTE) for Digital Services, X3. You can reach us by phone Monday to Friday until 8:00 p.m. and Saturday until 4:00 p.m.! Pedpfoxpd Ubsx Ag Degk More information: Leasing/financing and trade-in possible! - Subject to errors and prior sale! - All information without guarantee ... more on our homepage

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Pgedpfoirmulex Ag Dek