Used Parker Hiross 120 Q for sale (11,231)

Condition: good (used), Compressed air filter, fine filter Fedpfx Asb A Ni Eebfjgc -Connection: 2" inch -Number: 3 filters available Price: per piece

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Volumetric flow rate of air (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection (air): G 2" Threaded connection (water): G 3/4" Weight of the aftercooler: 11 kg Dimensions of the aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Volumetric flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters Fgjdpedzqn Uofx Abfsc - operates without compressed air loss All mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER Fedpfx Aey Twahebfogc COOLED (AIR/WATER) ON TANK DOCUMENTS YES CONNECTION NEW/USED USED

Condition: like new (used), Year of construction: 2024, operating hours: 252 h, functionality: fully functional, machine/vehicle number: FTR-12-1315, working width: 1,200 mm, type of input current: three-phase, total length: 2,150 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 3,490 kg, input voltage: 400 V, workpiece height (max.): 150 mm, workpiece width (max.): 1,200 mm, space requirement width: 2,200 mm, space requirement height: 2,500 mm, space requirement length: 2,150 mm, Q-Fin F1200 Deburring and Edge Rounding Machine | Year of Manufacture 2024 | Only 252 Operating Hours For sale is a Q-Fin F1200 deburring and edge rounding machine in near-new condition. The machine was installed and put into operation by Q-Fin in December 2024 and currently has only 252 operating hours. The system is ideally suited for deburring, edge rounding, and surface finishing of steel, stainless steel, and aluminum parts. The combination of a belt grinding station, four disc brush stations, and a magnetic conveying system ensures consistent and reproducible processing quality. Equipment: • Magnetic system for secure workpiece transport • 1 belt grinding station • 4 disc brush stations • HMI touchscreen operation • Quick Lock Disc System • Automatic belt height adjustment at the 1st grinding station (AGS1) • SmartLink (IXON) for remote access, diagnostics, and analysis • IXON module already integrated Current configuration: • Grinding belt Cubitron II K120 Fedpfx Asza U Rcjbfjgc • 4 x Brush Type QL Dark Brown K80 Additional accessories: • 1 x Grinding belt K80 Technical data: • Manufacturer: Q-Fin • Model: F1200 • Working width: 1,200 mm • Min. workpiece size: 80 x 80 mm • Max. workpiece width: 1,200 mm • Max. workpiece height: 150 mm • Net weight: 3,490 kg • Dimensions (L x W x H): 2,150 x 2,200 x 2,500 mm Location: Bünde, Germany Selling price: 93,500 EUR plus VAT Special features: • First installation by the manufacturer in December 2024 • Only 252 operating hours • Ready for immediate use • Very well-maintained condition • Inspection and demonstration possible by appointment We will gladly send further technical information, photos and videos upon request.

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future! Fodpfoyt Nm Eox Abfogc

Condition: used, Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high-pressure filter with clogging indicator / filter unit with 2 filters -Type: O-28P-1-10Q-M2-98-C2C2-1-1 / 0-24P-1-40W-M-1-2 -Number: 6x filter unit available -Price per unit -Dimension: 380/150/H250 mm Fjdsmv T Hqopfx Abfsgc -Weight: 20 kg/pc.

Condition: ready for operation (used), Festo 556815 / EGC-120-2000-TB-KF-0H-GK toothed belt axis SN: 3S7PLQX3B9D, used, in good condition, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Fsdex Erlcspfx Abfjgc

Condition: new, GMN HV-X 120-45000 / 18 high frequency spindle, serial number as per photo, unused, 100% functional, scope of delivery as per photos Fgjdoi D U T Ijpfx Abfsc

Condition: new, 12 boxes (24 rolls) of strapping tape, Tewe, 12x0.63mm, length 3000m, core 200, black – used -: Price for complete collection from location: only €1,200 (net)!! Manufacturer: Tewe Type: 12063, 7640 / Q 2242402 Year of manufacture: 2x 3,000m black Fgsdsv T Rwhopfx Abfjc Diameter: 200mm Condition: New Available: Immediately Location: Braunschweig

Condition: ready for operation (used), Year of construction: 2021, overall weight: 1,087 kg, load capacity: 152 kg, arm reach: 3,100 mm, controller manufacturer: KUKA, controller model: KR C4, number of axes: 6, This 6-axis KUKA KR 120 R3100-2 Quantec-2 was manufactured in 2021. It features a maximum reach of 3100 mm and a rated payload of 120 kg, making it suitable for various applications. With its robust design and IP65 protection class, this robot arm is ideal for demanding environments. If you are looking to get high-quality automation capabilities, consider the KUKA KR 120 R3100-2 Quantec-2 robot arm we have for sale. Contact us for further details. • Controller: KR C4 • Rated payload: 120 kg • Maximum payload: 152 kg (with supplementary loads) • Pose repeatability (ISO 9283): ±0.05 mm • Robot arm weight: approx. 1087 kg • Protection class: IP65 (wrist IP67) • Mounting position: Floor • Footprint: 830 mm x 830 mm • Availability: In stock / Available immediately Fgedpjyzhf Rsfx Abfoc • Quantity: 2 units ready for transport • Connectivity status: Disconnected and prepared for shipping

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Fgjdpfx Abjdfc Ikefsc

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: SMC, Valve manifold SX7000 / SY7000 -Solenoid valves: SY7120-5YOE-02F-Q 7 pieces Fgsdpexx Nazefx Abfoc -Individual components: see photos -Price/Fee: complete -Dimensions: 270/120/H90 mm -Weight: 1.7 kg

Condition: used, Year of construction: 2013, functionality: fully functional, cooling capacity: 113 kW (153.64 HP), type of cooling: water, overall weight: 943 kg, total width: 2,100 mm, total length: 2,270 mm, total height: 1,330 mm, heating capacity: 117 kW (159.08 HP), Equipment: compressor, Used Carrier 30 RQS 120 air cooled chiller / heat pump on R410A. Complete with 3 Copeland ZP182KQE-TFD-604 scroll compressors, braced heat exchanger, Carrier PM 100-110mm fan - 50 Hz - 0,53/0,18 kW - 720/500 RPM, Mecasem OOPSG001171100C receiver with a volume of 23,5 liter and a control cabinet with a Carrier Pro-Dialog+ display. Fgodsrlk E Nspfx Abfec Specifications Brand: Carrier Type: 30 RQS 120 Product type: Water chiller / Heat pump Refrigerant: R410A Weight: 943 kg Dimensions: 2270x2100x1330 mm (LxWxH) Compressors: 3 Copeland ZP182KQE-TFD-604 Display: Carrier Pro-Dialog+ Number of fans: 2 Fan specifications: 50 Hz - 0.53/0.18 kW - 720/500 RPM Year of manufacture: 2013 Quantity in stock: 1

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure piston compressor with associated pressure vessel and control cabinet Type: QTOX 120/65/35 WM-W Max. final pressure: 66 bar Volume flow: 50m³/h Nominal power: 18.5kW Nominal speed: 1450min Voltage/frequency: 400/50V/Hz Year of construction:2000 Maschinen- und Behälterbau GmbH High pressure tank up to 65bar Type MB 00320-2,10 1000 liters Fsdpfxjki Tzus Abfjgc Year of construction:2017

Condition: like new (used), Year of construction: 2024, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only been used as a test model and is therefore in excellent condition. You are always welcome to visit our showroom in Bergeijk to take a look. 2024 Deburring and Finishing Machine F200 XL with vacuum support. Suitable for deburring, rounding, and/or grinding steel cut parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products, from a euro coin to 200 mm wide, can be processed on this small but powerful machine. At the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by two oscillating cup brushes that apply light pressure. The brushes ensure a uniform rounding of all edges and holes, both around and within the flat-ground product, leading to the most optimal finish. The F200 XL offers options for automatic brush calibration, which ensures constant consistency and precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, manufactured in 2024, which can optionally be combined with a WES3000 wet-dust extraction unit and associated piping. Available only until it is sold. The machine is supplied with a 1-year warranty, excluding wear parts. Delivery is ex works Bergeijk. If desired, we can also offer the machine including transport, installation, and training of your operators on-site. We also have a lightly used F200 XL machine with magnetic product fixation available, manufactured in 2023. This machine can be viewed in the showroom in the Netherlands. Fgodeyt I U Ujpfx Abfec Contact us, and we will send you an interesting offer.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. Fgsdpfx Ael Dw D Esbfec The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: ready for operation (used), Siemens C98043-A1200-L 107 control card SN:Q69004, used, in good preserved condition, 100% functional, scope of delivery as per photos. Fgodpsxlwq Isfx Abfsc

Condition: new, Parker D1VW001CVJWL91 directional valve 24 VDC, unused, 100% functional, scope of delivery as per photos Fodpfx Abjy Srpzsfjgc

Condition: ready for operation (used), Parker VM064A10VM15 pressure reducing valve 64 bar,used, small traces of use, 100% functional, scope of delivery according to photos Fjdol Ecixspfx Abfegc

Condition: ready for operation (used), Ross Parker Hannifin MG051210AAAB Hydraulic Motor ,Ø housing: 93 mm , Ø drive shaft: 25.5 mm , hole spacing of the mounting holes: 106 mm , used, normal signs of wear, 100% functional, scope of delivery according to photos Fedpfxsi Ec D Uo Abfsgc

Condition: new, Siemens 1PH7133-7QD32-0CB3 asynchronous motor SN: YFF7619411201001, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Fgedpfx Abjx Dv Amefjc

Condition: new, Parker NV41248969/CDDHMIRNS27 hydraulic cylinder MC-M1113, unused, 100% functional, scope of delivery as per photos Fedpfoi Ecc Asx Abfegc

Condition: new, Parker PGP503B Gear pump 0058CP2D1NE3E2S-503A004 , Hole spacing of mounting holes: 118 x 118 mm, Ø hole for drive shaft: 24 mm ,unused, 100% functional, scope of delivery according to photos Fgedpfxei Ecc Ho Abfoc

Condition: ready for operation (used), Parker Compumotor 71-006763-01 Brushless servo motor , hole spacing of the mounting holes: 81 x 81 mm , Ø drive shaft: 20 mm , used, strong traces of use, , 100% functional Fedpfx Abei D Nalefogc

Condition: ready for operation (used), Parker PRM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve ,used, good condition, 100% functional, scope of delivery acc. photos Fjdpfji Ecc Rsx Abfjgc