Used Pearson Plate Shear for sale (12,514)

Condition: used, Edwards Pearson Hydraulic Guillotine 4m, model V.E. SHEAR 6.5/4080, Hedpfx Aszh Rfqsaionr

Condition: used, Used guillotine / shear for sale with non ferrous falling sheet support Used guillotine / shear for sale with non ferrous falling sheet support EDWARDS PEARSON D.D 2500mm x 3.5mm mechanical Guillotine for sale Direct drive guillotine / reliable sheet metal cutting machine Model: Truecut Control programmable / Front operated back gauge Datum Elgo control Back stop / back gauge Rapid blade gap adjustment Squaring arms Front sheet support arms Rear infra-red safety guarding Roving foot switch Year 1999 Can be seen working Hnsdpefuam Hjfx Aaior Manufactured in England Current blades are in good condition however new blades are available at extra cost Delivery and installation available at extra cost Also 2metre, 3metre dd guillotines for sale. Also Keetona Hydraulic guillotines for sale

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Hnjdpfey S D Nmsx Aaior Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Hnodpfx Asuddh Aeaior Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: used, Year of construction: 1980, sheet width / mm plate thickness / mm distance between columns / mm Hjdpfxsg Twmho Aaijnr Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts Hjdsul Eixjpfx Aaionr are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Hnjdeya Hwzepfx Aaier

Year of construction: 2000, condition: ready for operation (used), Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible. Hnsdpfx Aaszka Igjijr

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Hodpfx Ajxc Nikjaisnr

Condition: ready for operation (used), A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible. Hjdezlt Suspfx Aaijnr

Year of construction: 1994, condition: ready for operation (used), A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Hnedpfoy R Drfox Aaier

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Hnjdpfx Asy U Nqboaior

Year of construction: 1990, condition: ready for operation (used), A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement. Hedsy Tat Dspfx Aaienr

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Hnsdpjzukrqofx Aaier

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Hodpfx Aot Tqkdeaisnr Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm Hedjww Nccjpfx Aaijnr cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1997, sheet width 0610 mm Hnjdpfxjxu Nrpo Aaior plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm Hnodpfxot Tqnve Aaijr table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Year of construction: 1990, condition: ready for operation (used), Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible. Hnsdpfx Asztzrfeaier

Condition: used, Year of construction: 1998, plate thickness 16 mm cutting length 4075 mm weight 23 t output 45 kw Hnedpfxsztfvnj Aaisr

Condition: used, Year of construction: 1997, cutting length 2000 mm sheet thickness - max. 6 mm Hnsdjztfv Uspfx Aaior operating pressure 250 bar fabric-no. S2669 weight of the machine ca. 4,7 t working width 2059 mm

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min Hodpfxszr Rqnj Aaijnr down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: used, Year of construction: 1990, plate thickness 5 mm cutting length 3000 mm Hnodpsztf Azefx Aaior rear stop 750 mm total power requirement 7,5-10 kW weight of the machine ca. 4 t

Condition: ready for operation (used), Offered is a combined Peddinghaus section shear with punch unit for punching, shearing and notching flat bar, sections and bar stock. Punching force: approx. 80t, punching capacity: 31mm in 20mm steel, throat depth: 510mm, max. round bar diameter: 50mm, max. square bar size: 45mm, max. angle iron dimensions X/Y/Z: 140mm/140mm/13mm, weight: approx. 3400kg. An on-site inspection is possible. Hsdpfxszrhhdj Aaienr

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Hodpfx Aovkbrqjaienr Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.