Used Pelletizing Machine for sale (73,053)

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; Nljdpfez Duuxjx Ab Reh perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 26, Automatic bagging machine LAMAR SL-200 – 2015 For sale: an automatic bagging machine / packaging machine, model SL-200, manufactured by the Polish company LAMAR in 2015. The machine is designed for packaging bulk products, including pellets, fertilizers, animal feed, soil, and salt. Key parameters: Packaging capacity for pellets: approx. 5 tons/hour. Nsdpj Aa Duysfx Ab Rjlh Adjustable product weight per bag: 5–25 kg. Bag length adjustment: lengthening and shortening from the operator panel. Film tube: 940 mm. Technical specifications and equipment: 3-lane weighing dispenser, bag forming unit for 15 kg bags and other formats within the specified adjustment range, gusset forming unit, film sealing unit, servo motor for positioning the horizontal jaws, unit for measuring bag length on film without printing, roller perforating unit, technological platform, control cabinet, feed hopper. The machine is in very good technical condition. A video of the machine in operation can be provided. Please contact us for further information.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Nlsdpfxezxgglj Ab Rjh Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Engine power: 22 kW. Dimensions: 1400 mm x 600 mm x 1100 mm. Weight: 750 kg. Nlodpjxmhx Eefx Ab Rsh Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: used, This pellet press is being auctioned off in our industrial auction / machine auction, which includes surplus inventory, clearance sales, and individual/exhibition pieces, online. You can find this and many other items on our platform. Nledpfj Abaqmsx Ab Reh

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine Njdpfehmi Ucjx Ab Rolh This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: Nodpfxsxxb Rre Ab Rolh X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Nodpo Aayk Rofx Ab Rjlh Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Nsdpfjx D Tbmox Ab Rslh Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK Nodjz Eh Egspfx Ab Rolh XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets using dry, ground biomass, such as sawdust, hay, Miscanthus (Chinese silver grass), or similar, to save on heating costs or to produce feed pellets. The machine is available in 3 HP, 5.5 HP, and 7.5 HP versions, as well as with a PTO drive. The hourly output varies depending on the model, ranging from 30 kg to 70 kg. It is a purely Italian product that complies with EC regulations for workplace safety. - Drive via electric motor 400V/5.5 HP (~4.05 kW) - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 30-40 kg - Dimensions: 850 x 680 x 1110 mm (L x W x H) - Weight: 135 kg Nljdo Adh Urepfx Ab Roh GENERAL DESCRIPTION OF THE MACHINE This pelletizing machine, intended for non-professional use, has been designed and built to produce pellets from sawdust and wood waste from wood processing (the main features and morphological properties of the materials to be used are described below). The process automatically performed by the machine consists of compressing and extruding the material introduced into the upper feed hopper. Through heating, which occurs automatically and is maintained by the heat dissipation due to the compression, the pellet is compacted as it passes through the die. For the operation of the machine, the continuous presence of an operator is required, who feeds the raw material, either manually or using an automatic loading system. The limit properties of the feed material are listed below: MORPHOLOGY: chips or material with a particle size not less than 0.5 mm and not more than 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that depends heavily on the type of product used; in any case, these are indicative values). PROPERTIES: pure material (free from contaminants, especially metallic or of any kind that could damage the machine). The verification of the pelletizability of the materials is the responsibility of the buyer. Any verbal instructions, multimedia or written documentation provided regarding pelletizable products should be understood as purely informal and indicative. KONRAD HOG WERKSVERTRETUNGEN GMBH ACCEPTS NO RESPONSIBILITY FOR THE PELLETIZABILITY OF THE MATERIALS. NO COMPLAINTS WILL BE ACCEPTED REGARDING LOW OR LACK OF PELLET PRODUCTION, UNLESS THIS CAN BE CLEARLY TRACED BACK TO A FAULT IN THE MACHINE ITSELF. THEREFORE, IT IS RECOMMENDED THAT BEFORE MAKING ANY COMPLAINT, IT IS ENSURED THAT THE COMPLAINT IS NOT RELATED TO THE MATERIAL USED OR THE INABILITY TO USE THE MACHINE. THE FAULT DIAGNOSIS WILL IN ANY CASE BE THE RESPONSIBILITY OF THE BUYER. IF THE MACHINE DOES NOT SHOW ANY FAULTS DURING A POSSIBLE INSPECTION, WE RESERVE THE RIGHT TO CHARGE FOR THE COSTS OF THIS INSPECTION. IF THE BUYER REQUESTS THE INTERVENTION OF PERSONNEL FROM SMARTEC SRL (OR ITS REPRESENTATIVE)

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), or similar, to save on heating costs or to produce feed pellets. The machine is available in 3 HP, 5.5 HP, 7.5 HP versions and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg. Nedpfs Adh Uxjx Ab Rolh It is a purely Italian product that complies with EC regulations for workplace safety. - Drive via electric motor 400V/7.5 HP (~5.52 kW) - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: approx. 70-80 kg - Dimensions: 850 x 680 x 1110 mm (L x W x H) - Weight: 150 kg GENERAL DESCRIPTION OF THE MACHINE The pelletizing machine, designed for non-professional use, is designed and built to produce pellets from sawdust and wood waste from wood processing (the main characteristics and morphological properties of the materials to be used are described below). The process, which is automatically carried out by the machine, consists of the compression and extrusion of the material introduced into the upper feed hopper. Through heating, which is generated automatically and maintained by the heat dissipation due to the compression, the pellet is compacted as it passes through the die. For the operation of the machine, the permanent presence of an operator is required, who feeds the raw product, either manually or using an automatic feeding system. The limit properties of the feed product are listed below: MORPHOLOGY: chips or material with a particle size not less than 0.5 mm and not more than 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that depends strongly on the type of product used; in any case, these are guideline values). PROPERTIES: pure material (free of impurities, especially metallic or of any kind that could damage the machine). The verification of the pelletizability of the materials is the responsibility of the buyer. Any verbal instructions, multimedia or written documentation provided regarding pelletizable products are to be understood as purely informal and indicative. KONRAD HOG WERKSVERTRETUNGEN GMBH ACCEPTS NO LIABILITY REGARDING THE PELLETIZEABILITY OF THE MATERIALS. NO COMPLAINTS REGARDING LOW OR LACKING PELLET PRODUCTION WILL BE ACCEPTED UNLESS THEY CAN BE CLEARLY TRACED BACK TO A FAULT IN THE MACHINE ITSELF. THEREFORE, IT IS RECOMMENDED TO ENSURE BEFORE ANY COMPLAINT THAT THE COMPLAINED FAULT IS NOT DEPENDENT ON THE MATERIAL USED OR THE INABILITY TO USE THE MACHINE. THE FAULT CHECK WILL IN ANY CASE BE AT THE EXPENSE OF THE BUYER. SHOULD THE MACHINE NOT SHOW ANY FAULTS DURING A POSSIBLE CHECK, WE RESERVE THE RIGHT TO DEMAND REIMBURSEMENT OF THE COSTS FOR THIS CHECK. IF

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., in order to save on heating costs or to produce feed pellets. The machine is available in 3 kW, 5.5 kW, and 7.5 kW versions, and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg. It is a purely Italian product that complies with EU regulations on workplace safety. - Drive via PTO shaft, max. 540 rpm - Suitable for tractors from approx. 18 hp - Incl. 3-point linkage - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 70-80 kg - Dimensions: 850 x 760 x 1260 mm (L x W x H) - Weight: 158 kg The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., in order to save on heating costs or to produce feed pellets. The machine is available in 3 kW, 5.5 kW, and 7.5 kW versions, and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg. It is a purely Italian product that complies with EU regulations on workplace safety. - Drive via PTO shaft, max. 540 rpm - Suitable for tractors from approx. 18 hp - Incl. 3-point linkage - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 70-80 kg - Dimensions: 850 x 760 x 1260 mm (L x W x H) - Weight: 158 kg GENERAL DESCRIPTION OF THE MACHINE Nodpfx As Adh U Eob Rjlh The pelletizing machine, designed for non-professional use, has been developed and built to produce pellets from sawdust and wood waste from wood processing (the following describes the main characteristics and morphological properties of the materials to be used). The process automatically performed by the machine consists of compressing and extruding the material introduced into the upper feed hopper. Through heating, which occurs automatically and is maintained by the dissipation of heat due to compression, the pellet is compacted as it passes through the die. For the operation of the machine, the continuous presence of an operator is required, who feeds the raw product, either manually or using an automatic feeding system. The following lists the limit properties of the supply product: MORPHOLOGY: chips or material with a particle size of no less than 0.5 mm and no more than 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that strongly depends on the type of product used; in any case, these are indicative values). PROPERTIES: pure material (free from impurities, especially metallic or of any kind that could damage the machine). The buyer is responsible for verifying the pelletizability of the materials.

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., to save on heating costs or to produce feed pellets. The machine is available in 3 HP, 5.5 HP, 7.5 HP versions and with a PTO drive. The hourly output varies depending on the model, from 30 kg to 70 kg. This is a purely Italian product that complies with EC regulations for workplace safety. - Drive via electric motor 230V/3.0 HP (~2.21 kW) Nsdpj Adh Ulsfx Ab Rjlh - Pellet Ø: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 30-40 kg - Dimensions: 850 x 680 x 1110 mm (L x W x H) - Weight: 135 kg GENERAL DESCRIPTION OF THE MACHINE The pelletizing machine, designed for non-professional use, was developed and built to produce pellets from sawdust and wood waste from wood processing (the main features and morphological properties of the materials to be used are described below). The process, which is carried out automatically by the machine, consists of the compression and extrusion of the material fed into the upper feed hopper. By heating, which is generated automatically and maintained by the heat dissipation due to the compression, the pellet is compacted as it passes through the die. For the operation of the machine, the permanent presence of an operator is required, who feeds the starting product, either manually or using an automatic loading system. The following lists the limit properties of the feed product: MORPHOLOGY: chips or material with a particle size between 0.5 mm and 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that strongly depends on the type of product used; in any case, these are only indicative values). PROPERTIES: pure material (free from impurities, especially metallic or any kind that could damage the machine). Checking the pelletizability of the materials is the responsibility of the buyer. Any verbal instructions, multimedia or written documentation provided regarding pelletizable products should be understood as purely informal and indicative. KONRAD HOG WERKSVERTRETUNGEN GMBH ASSUMES NO RESPONSIBILITY FOR THE PELLETIZEABILITY OF THE MATERIALS. NO COMPLAINTS WILL BE ACCEPTED REGARDING LOW OR LACK OF PELLET PRODUCTION UNLESS THIS CAN BE CLEARLY ATTRIBUTED TO A FAULT IN THE MACHINE ITSELF. THEREFORE, IT IS RECOMMENDED TO ENSURE BEFORE ANY COMPLAINT THAT THE ALLEGED DEFECT IS NOT DUE TO THE MATERIAL USED OR THE INABILITY TO USE THE MACHINE. THE FAULT DIAGNOSIS WILL IN ANY CASE BE THE RESPONSIBILITY OF THE BUYER. SHOULD THE MACHINE NOT SHOW ANY DEFECTS DURING A POSSIBLE INSPECTION, WE RESERVE THE RIGHT TO CHARGE FOR THE COSTS OF THIS INSPECTION. IF THE BUYER ENGAGES THE SERVICES OF PERSONNEL FROM SMARTEC SRL (OR

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, Nlsdpoz St Hwsfx Ab Roh coolant, Low Volt light.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, Nedpfez R Rbdox Ab Rjlh spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Nljdpfxezq Ur Te Ab Roh Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Njdpfxsz Iz Imj Ab Rolh Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2023, 400mm swing, Nodpfsz Srv Dox Ab Rslh 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2002, functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. Nledpfx Ajw U Swpsb Reh + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, Nledpfx Aboz Eh Nls Rsh 30 station ATC, through spindle coolant, swarf conveyor.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system. Njdpszzzm Eefx Ab Rjlh

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Nlsdpfx Asyahv Sob Roh Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Nlsdpfx Abozrnkro Rsh Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm Njdpoy Ni Ivefx Ab Relh 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.