Used Pescha Ek 100 for sale (26,269)

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 mit 3 Werkzeugen / with 3 Set of Blades Serial-No. 202 076 Bdedpfxjz H Aw Hj Ahmjh Geschwindigkeit / Speed max. 50 cycles/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Karl Tranklein EK-100 Corner Rounder Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades with a 12 mm radius is included. Stack height: 100 mm Weight: 130 kg Cycles per minute: 50 cycles/min Power supply: 400 V Waste is directed outside the machine to the chutes. This is the model currently in production. Bjdszt H Uropfx Ahmjdh

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Description WEOFFER AN BEAUTIFULL CONDITION REIS PRESS YEAR: 2004 WITH SIEMENS OPERATIONAL PANEL. Bjdpfx Aexu Ddtshmodh Description Press force: 1000 KN Press closing speed: 50 mm/s Press opening speed: 50 mm/s Installation height: 1400 mm Maximum table distance: 1700 mm Tables: 1600×1300 mm Allowable weight 12000 kg No.1 clamping table Translation 1500 mm speed 200 mm/s Maximum load 6000 kg Nr.1 Tilting table Angle 60° Maximum load 7500 Kg Overall dimensions: 3900 x 2400 x 3045 mm FOR TRANSPORT WILL BE DISASEMBLED -CILINDER AND HYDRAULIC UNIT TO FIT ON MEGA TRAILER 3000mm height is required. Weight: 17000 Kg

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: Bdjdpfx Aezt I Rnohmsh - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Bdodpfx Ahezucxcjmjh Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Bsdpoyz Dhzsfx Ahmodh Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Bsdpfx Aozizlqohmedh Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm Bodpfx Aheuqma Asmodh • Max. diameter: 300 mm • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Condition: ready for operation (used), Year of construction: 2019, overall weight: 9,000 kg, number of axes: 3, This 3-axis INANMAK MEKOR PL-YPe 3100 was manufactured in 2019. It features a working area of 3,000 × 12,000 mm and is equipped with a Hypertherm HPR400XD High Definition plasma source. The machine includes a 3D bevel cutting head and operates at a maximum positioning speed of 20 m/min. If you are looking to get high-quality plasma cutting capabilities, consider the INANMAK MEKOR PL-YPe 3100 machine we have for sale. Contact us for further details. Bodpjzcn I Hofx Ahmodh • Plasma Source: Hypertherm HPR400XD High Definition, 400 A • Control System: Hypertherm Edge Connect CNC • Working Area: 3,000 × 12,000 mm • Cutting Head: 3D bevel cutting head • Maximum Positioning Speed: 20 m/min • Machine Voltage: 200 V / 50 Hz • Generator Voltage: 380 V / 60 A • Table Dimensions: 4,300 × 15,000 × 2,300 mm • Material Compatibility: Carbon steel, stainless steel, aluminum • Usage: Approximately 1 year • Technical Condition: Excellent Additional equipment • Inanmak filtration and dust extraction unit included

Condition: like new (used), Year of construction: 2021, functionality: fully functional, 100 MEX Grain Roaster, Azteca Model, Year 2021, includes husk collectors, 1,500 kg capacity, approx. 3.62 x 3.52 x 3.50 m. - Tostadora de grano Marca 100 Mex, Modelo Azteca, Año 2021 Incluye colectores de cascarilla de Capacidad 1500kgrs con Medidas aprox 3.62 x 3.52 x 3.50 mts. Bsdpfezyv Iuex Ahmjdh

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Bdedpfxou Udp Ie Ahmoh

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 5,050 mm, construction height: 2,900 mm, operating hours: 3,183 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + S - 2W5050 ID: 25053.2983 Category: Used Mast: 2W Lowered height: 2,900 mm Lifting height: 5,050 mm Capacity: 1,000 kg Platform height: 4,250 mm Picking height: 5,850 mm Initial lift: Yes Cabin width: 1,000 mm Bdjdpfx Aszq Udvjhmeh Year: 2015 Hours: 3,183 h Battery capacity: 48 V / 465 Ah Options: - Side guidance / Rail guidance

Condition: excellent (used), Electrically controlled infeed magazine for planing machines For sale is an electrically controlled infeed magazine for continuous and uninterrupted feeding of planing machines. Technical features: Bdedpfx Ahsz Dpvdemoh * Automatic adjustment of the feed rate to the planing machine * Feed rate of up to 60 m/min * Adjustable feed force, adapted to the respective workpiece size * Continuous and uniform feeding * Front section can be folded down for better accessibility and convenient operation * Robust design for professional use The infeed magazine is ideal for continuous operation and efficient material feeding to planing machines.

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Bdsdpfxoz Ep Aye Ahmsh Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 460 V, input current: 109 A, power of the servo motor: 73,500 W, input frequency: 60 Hz, power: 73.55 kW (100.00 HP), cable length: 1,000 mm, control voltage: 460 V, Equipment: type plate available, We offer you a new A-synchronous motor for KMT SLV 100 HP for sale. Bedpfx Asrwxu Ijhmsdh Please also visit our other advertisements with spare and wear parts, water jetting machines and pumps. Or visit our webshop. For the access data, please contact us by phone or e-mail. As your contact for all things waterjet with 25 years of experience, we can also offer you the following: - Used systems and pumps (used and reconditioned) - Machine relocations - Machine and pump overhaul or refurbish (at your site) - Fast spare parts supply (stock 24/7) - Special solutions in the waterjet sector - Technical and online support (XM Reality) - Qualified software training - Service, training and maintenance work Calculate your annual requirements with us or secure your maintenance contract and we will guarantee you your TOP price for 12 months. We are already looking forward to making you an individual offer. No matter which application you require - you can count on us! Simply get in touch with us. Our team will be happy to help you.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand Bdsdpfoz Hcz Ssx Ahmeh - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: used, machine/vehicle number: --567--EB--OK--EK, Year of construction: 2019, operating hours: 4,516 h, load capacity: 2,500 kg, lifting height: 5,480 mm, free lift: 1,694 mm, load center: 320 mm, fuel type: electric, mast type: triplex, construction height: 2,474 mm, battery voltage: 80 V, fork length: 1,100 mm, front tire size: 9, rear tire size: 5, overall weight: 5,300 kg, Equipment: 4th hydraulic function, cabin, 5068448 Serial Number: --567--80100--E25 H2X387V05169 Bjdpfxsz Hgvms Ahmedh Battery Details: AIM 80V 4PzS 500Ah, Bj 28/2026 NEU

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3292010, total width: 1,070 mm, total length: 2,030 mm, total height: 2,320 mm, input voltage: 400 V, ULTRON U-100 ultrasonic cleaner – 30 kW – 400 V – 2011 For sale: ULTRON U-100 industrial ultrasonic cleaner, manufactured in 2011, designed for thorough cleaning and degreasing of industrial components using ultrasonic technology. The machine has an ultrasonic power of 30,000 W and operates on a 400 V power supply. The unit is constructed from stainless steel and features a spacious working chamber with a lid. Additional equipment/modification: The cleaner has been fitted with a custom-made lifting and lowering mechanism for the basket, operated by an actuator, which greatly simplifies the loading and unloading of cleaned components and the operation of the device. Technical data: - Manufacturer: ULTRON Bsdpfxjzza Ins Ahmjdh - Model: U-100 - Year of manufacture: 2011 - Machine number: 3292010 - Ultrasonic power: 30,000 W - Power supply voltage: 400 V - Overall dimensions: 2030 × 1070 × 2320 mm - Basket lifting/lowering: by means of an actuator – custom-made - Construction: stainless steel The machine has a robust, industrial design and is suitable for use in production plants, workshops, and for cleaning industrial parts and components. Transportation is the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WE OFFER NICE CONDITION AMADA PRESS BRAKE CNC Bsdjvnzvdepfx Ahmedh MACHINE WE CAN ALSO DELIVER TO THE CUSTOMER WORKSHOP-FACTORY TECHNICAL DATA pressure 100 t chamfer lenght 3000 mm distance between columns 2700 mm Control AMADA AMNC II-PC throat 415 mm stroke 200 mm dayligth 500 mm adjustment of the rear stops 600 mm table width 60 mm number of controlled axis 7 ajustment speed 200 mm/sec bending speed 20 mm/sec POWER 5,3 kW WEIGHT 6,7 t DIMANSIONS:

Condition: excellent (used), functionality: fully functional, clear span: 2,700 mm, total height: 10,050 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 10,000 kg, number of shelf rows: 5, overall weight: 14,500 kg, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system on offer has a total of 648 pallet spaces, including spaces on the floor level. At a total price of €14,240.00 net, this corresponds to a price of only €21.97 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Level load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 5 beam levels - Pallet spaces: 648 including floor spaces - Price per pallet space: €21.97 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: Bdsdpfez H Nccjx Ahmeh - 28 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 270 × Beams, approx. 360 × 12 × 5 cm - 540 × Locking pins PRICE: €14,240.00 net €16,945.60 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner logistics company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, a renovation, or an extension – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: Bdjdpfxez H Nane Ahmsh - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: good (used), Year of construction: 2015, operating hours: 527 h, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 2.650 kg Functional Mast: articulated arm Lifting capacity: 200 kg Bedpfx Ahozzl R Ismjdh Working height: 1.000 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 300 m Transport dimensions (LxWxH): (L/B/H): 2,80m / 1,00 m / 1,99 m Additional information Please contact Tobias Mayr for more information

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Bedpfxod En Ryj Ahmjdh Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH There's something for everyone!

Condition: new, Year of construction: 2023, Carrying capacity: 10.000 kg Bdodpfx Ahezbl Dvomsh

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment Bdsdpoyc H I Ssfx Ahmoh • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg