Used Pfeiffer Splitflow 80 + Tc110 Controller for sale (61,193)

Condition: new, Year of construction: 2023, functionality: fully functional, Performance & Pumping Speed • Max Pumping Speed (N₂): ~60 to 67 l/s • Max Pumping Speed (He): ~58 l/s • Max Pumping Speed (H₂): ~48 l/s • Max Pumping Speed (Ar): ~66 l/s • Interstage Pumping (N₂ / He): ~2.8 l/s • Ultimate Pressure: < 1 × 10⁻¹⁰ mbar (with rotary vane backing pump) Physical & Electrical Specs • Rotational Speed: Up to 90,000 rpm (0–1500 Hz) via controller like the TC 110 • Run-up Time: ~75 seconds • Sound Pressure Level: 48 dB(A) • Weight: Approx. 1.7 to 3.8 kg (depending on flange and controller setup) • High Vacuum (HV) Flange: DN 63 CF-F or DN 63 ISO-K Nodjz Iw T Ejpfx Aaxsdc • Electrical Input: 24V DC (± 10%), 6.3A (controller dependent) Brand new never used. Please check out our other listings as well.

Condition: used, 80 Control Units Ndodpozvhnfofx Aaxec Electronics / PLC Controls Manufacturer: FESTO Type: CPX-CEC-C1 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2014, functionality: limited functionality, The Pfeiffer OnTool DryPump PDP100, with serial number 53005526 is an oil-free, multi-stage dry vacuum pump manufactured in November 2014. Manufacturer: Pfeiffer Vacuum Type: OnTool DryPump Ndjdpfxoz E Sgnj Aaxjc Serial Number: 53005526 Year of Construction: 11/2014 Electrical Requirements: 230 V, 3 Phase, 50/60 Hz Weight: 121 kg (approx. 267 lbs) Operation: Oil-free dry compression, commonly water-cooled for stable temperature control in industrial or semiconductor environments. Multi-stage roots vacuum pumps from Pfeiffer Vacuum+Fab Solutions operate with precisely engineered lobes that do not come into contact with each other or the housing. This design eliminates the need for lubricants in the compression chamber, ensuring dry and oil-free vacuum generation, which makes multi-stage roots vacuum pumps the perfect choice for a wide range of applications requiring clean vacuum such as semiconductor manufacturing, vacuum coating or chemical and pharmaceutical processes. Price 5.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila.

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Nsdpfxjphl Ece Aaxsdc Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: new, Year of construction: 2018, operating hours: 7 h, ABB IRB6700-205/2.80 + IRC5 controller + TPU DEVELOPMENT OF GSG ROBOTICS Njdpfxsz Taczs Aaxedc GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the renowned manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in 2000. Njdpj Afphijfx Aaxsdc This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype manufacturing. The machine is in a ready-to-use condition and impresses with the combination of large travel ranges, an NC rotary table, and the stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control system - 60-tool changer SK40 - chip conveyor - separate coolant preparation system with band filter

Condition: used, Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffing & vacuum operation with pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional Pfeiffer Vacuum HLT 560 helium leak detector. The device is designed for highly precise leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service. It is suitable for the reliable detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffing modes. With the sniffing probe, leak locations can be precisely identified, while in vacuum mode, complete assemblies or systems can be tested. The turbo pump and pre-pump are integrated, making the device usable as a complete, mobile testing system. Ndedpozix Hxofx Aaxsc Application areas (examples): Leak testing of components and assemblies Testing of vacuum chambers, pipelines, valves, heat exchangers Quality control in production Service and maintenance work on vacuum equipment Technical data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Manufacturer: Pfeiffer Vacuum Integrated turbo pump Pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Measuring gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum mode / Sniffing mode Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2021, Canon Varioprint 6180 Titan Ndedpfxowutchs Aaxoc Includes C53 controller. Total print count: 17 million. Currently available. All of the aforementioned equipment is not for sale or resale in Russia, or in any country subject to an EU embargo.

Condition: ready for operation (used), Year of construction: 2008, Available immediately ex-works: CNC press brake AMADA Type HFT 80 - 25 Year of manufacture 2008 Touchscreen control Pressing force 80 tons Working length 2570 mm Distance between uprights 2125 mm Overhang 420 mm Ndsdpfx Aj Afcmxoaxec Approach speed 100 mm/s Working speed 10 mm/s Retraction speed 100 mm/s Stroke 200 mm Overhang 420 mm Drive power 9 kW Weight 5750 kg Complete set of tooling Price: EUR 19,500.00 plus VAT, ex-works.

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG Turbo Molecular Pump with MAGPOWER Controller, Q2662100, ATH 2300M Model: Q2662100 Type: ATH2300M Condition: Used Technical Data: ATH-M 200–240V AC 50/60Hz General: Magnetically levitated turbo molecular pump Water cooling Magnetic bearing (Maglev), oil-free Speed: 39,000 min⁻¹ Pumping speed N₂: approx. 1,600 l/s Ultimate pressure: < 6 × 10⁻⁹ mbar Njdpfxozh I I Nj Aaxedc Motor: 40 Vrms, 1033 Hz, 12 Arms Inlet flange: DN200 ISO-F Outlet flange: DN 40 ISO-KF External electronics (Magpower) Adixen by Pfeiffer Vacuum Controller MAGPOWER S12A P/N: 120917 Rev. G Vi: V2.10.00 / Vn: V2.08.00 Vv: V2.10.00 Vm: V3.11 Accessories: Pfeiffer/Adixen pump cable A215300 - Pump-2-MAGPOWER cable for connection between turbo molecular pumps and control units Power cord: Hubbell HBL4770C (NEMA L7-15P, 277 V / 15 A) Remote control / I/O cable (DB25) Note on item condition: Gases passed: NF₃/N₂

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Nodsz Ehvxspfx Aaxodc

Condition: used, Grinding rollers for Pfeiffer / Babcock bowl mill Ndodpfsy Ittyex Aaxsc Used, refurbished, and new available from stock Heavy-duty grinding rollers from a bowl mill available for sale Viewing possible by appointment.

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 010325, COMPLETE TYRE RECYCLING LINE – SATURN / ELDAN A complete industrial tyre and rubber recycling line from reputable manufacturers Granutech Saturn and Eldan Recycling is for sale. The installation is sold as a complete, ready-to-dismantle and re-commission technological line. The line includes: SATURN 52-32 HT – industrial primary shredder (Heavy Duty Shredder) SATURN / ELDAN GRIZZLY 80 – secondary shredder ELDAN Granulator 160 – year of manufacture 1999 complete set of belt conveyors inter-stage conveyors 2 magnetic separators for steel recovery vibrating tables and material separation system discharge conveyors complete set of original control and electrical cabinets complete line control automation system Applications: recycling of car and truck tyres rubber shredding steel recovery production of rubber granulate Advantages: complete technological line machines from reputable manufacturers, Granutech Saturn and Eldan robust industrial design suitable for continuous operation Ndodpjzmucqsfx Aaxsc transportation and re-assembly possible The machine can be viewed by prior arrangement. We provide assistance with dismantling and loading. Additional photos are available upon request. INDIVIDUAL MACHINES CAN BE PURCHASED SEPARATELY

Condition: good (used), functionality: fully functional, For sale is a robust and reliable Pfeiffer Piccolo oscillating circular saw, designed for professional use in carpentry shops, timber construction companies, and woodworking businesses. The machine is equipped with a total of approximately 4,000 mm long roller table, pneumatic workpiece clamping, and two-hand operation. The cutting feed rate is continuously adjustable. Njdpezx U E Aefx Aaxedc Technical data / Features: Manufacturer: Pfeiffer Model: Piccolo Machine type: Oscillating circular saw / Miter saw Cutting height: max. approx. 125 mm Total roller table length: approx. 4,000 mm Pneumatic workpiece clamping device Two-hand operation Continuously adjustable cutting feed rate Length stop Roller track for workpiece feed and removal Dust extraction connection Separate control panel with emergency stop Robust industrial design The machine is in used condition, as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's premises. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to alteration. All information is without guarantee.

Condition: good (used), Press force: 200 tons Nodpfx Asgvz Hxsaxsdc Table: 1500x1000 mm Motor: 45 kW Weight: 18,000 kg Frame width: 1500 mm Dimensions: Machine: 5500x2610x2150 mm

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Ndodpfxo Aa Ikrj Aaxjc Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: excellent (used), Year of construction: 2016, operating hours: 16,803 h, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 850 mm, workpiece weight (max.): 1,800 kg, total height: 3,700 mm, total length: 5,000 mm, total width: 5,600 mm, table height: 700 mm, table length: 900 mm, overall weight: 21,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, Year of construction: 2016 CNC controller: CELOS with SIEMENS 840D sl operate 21,5" ERGOline Control with Multi-Touch Screen Nsdo Adzbrepfx Aaxjdc Axes X-axis travel mm: 800 Y-axis travel mm: 1050 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º (0,001) Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 7 Milling/turning table nc: Table dimensions mm: Ø900x700 Max. workpiece weight kg: 1800 Table rotation speed rpm: 40 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40/100%ED) Spindle torque Nm: 130/86 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 63 Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 650 Max tool weight kg: 15 Chip-to-chip time s: 4.2 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp Tool breakage probe Mist collector 3D quickSET MPC – Machine Protection Control Paper band filter Active chatter suppression (ACC), improved surface finish with reduced machining time, extended tool life Machine running times Under power: 38383 Spindle Working: 16803 Rated power kVA: 63 Basic machine dimensions / weight Length mm: 5000 Width mm: 5600 Height mm: 3700 Weight kg: 21500

Condition: used, Year of construction: 1984, Lathe Pfeifer Nodex Nw Abepfx Aaxjdc Year of manufacture approx. 1984 Bed length 1.5 meters

Condition: refurbished (used), functionality: fully functional, -Very good condition -1. year operating time after revision Nedpfxouq A Ags Aaxsdc -Digital analog control with RS232 interface. The recommended price is 6,000.00 EURO. The associated control unit is 800.00 EURO.

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMU 80 P duoBLOCK Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS 5-axis-simultaneous Travel Njdpfx Asz Dkunoaxsdc X-Axis: 800 mm Y-Axis: 800 mm Z-Axis: 800 mm B-Axes C-Axis Panning head Rapid motion: (X/Y/Z): 60 m/min. Spindle speeds: 12.000 rpm Spindle power: 28 / 19 kW Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table Table size: 900 x 700 mm Max. Table Load: 1.400 kg Equipment Internal cooling: 40/80 bar Chip conveyor Caliper Electronical handwheel Working mode: 4

Condition: used, Year of construction: 2008, functionality: fully functional, used lathe Ndede Aarraspfx Aaxec Manufacturer: Pfeiffer

Condition: excellent (used), Year of construction: 2007, Stöckel FX 80/50 ST 2 Surface grinding machine Stöckel FX 80/50 with ST 2 control, year of manufacture 2007, in SUPER condition. CE-compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture 2007 Technical data Clamping area (L x W in mm) Ndsdjz Ipk Ajpfx Aaxsc 900 x 500 Grindable area (L x W in mm) 800 x 500 Magnetic chuck size max. mm 800 x 500 Grinding wheel dimensions max. mm 300 x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 1900 Power kW 7.5 Machine weight approx.: 4.0 t Accessories and equipment: About the machine: Offered is a surface grinding machine Stöckel FX 80/50 with ST 2 control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for training purposes. It features a very easy-to-use control system. A grinding travel of 800 mm in the longitudinal axis and a transverse travel of 500 mm make it suitable for toolmaking, fixture construction, and small-series production. The extensive standard equipment and the easy handling of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Stöckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Stöckel on-site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, functionality: unexamined, machine/vehicle number: TSH 065 D, Used Pfeiffer TSH 065D with Mass Spectrometer. Complete set! Nsdpfx Ajw H Np Isaxedc Turbo pump: Pfeiffer TSH 065 D (Controller Pfeiffer TCP 015) Diaphragm pump: Vacuubrand MZ 2 NT Mass Spectrometer: Balzers QME 064 + Partial Pressure Gauge Printer: Philips PM8222 recorder Complete with many vacuum components.

Condition: ready for operation (used), Indramat DDS03.1-W030-D Controller, SN: 263508-08783, controller fully overhauled by the manufacturer, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ndedjx Etwyjpfx Aaxsc

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis Ndjdpfjzhuitox Aaxoc FMB multi-machining center, Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, FMB programming software, Pneumatic material stop, Measuring / probing device.