Used Piller Uniblock Ub-V 1500 for sale (38,611)

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. Gjdsu Nzwujpfx Almjbl A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Gbjdpfsw Izrcjx Almel Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Year of construction: 2024, condition: new, weight max. in kg 300 kg dimensions 1200 x 900 x 1300 mm weight 125 kg Godpoxcywrefx Almobl For attaching to the forks. fastening with safety bolts, checker plate floor, entry door, safety grille, storage basket for tools, Fork pockets 190 x 100 mm, powder-coated. Approved for a maximum of 2 people, approved by the dekra. Basket height 1050 mm Basket width 1100 mm Basket depth 700 mm

Condition: good (used), electric motor, three-phase motor Gedpfjgx Al Uex Almsbl -Manufacturer: SEW, electric motor unfortunately no type designation -Power output: approx. 1.1 kW -Speed: 1500 rpm -Voltage: 220/380 V -Shaft: Ø 12 x 20 mm -Design: B3/B5 -Dimensions: 300/225/H200 mm -Weight: 19 kg

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch Gjdjgt E Ilepfx Almebl - Reducing sleeve for main spindle - Operating tool in tool box

Condition: ready for operation (used), Mattke MTR5000-170/25 servo controller, SN:4150038299, the servo controller has been overhauled by a specialist company, used, in good condition, 100% functional, scope of delivery as per photos Godpfx Asi Eb A Uslmebl

Condition: excellent (used), For sale: High-end SIEMENS industrial electric motor – robust German engineering, designed for demanding applications. The motor is equipped with an encoder (2048 pulses) and a temperature sensor, allowing for precise control and operation monitoring. Visual condition is good with normal signs of use for industrial equipment. Technically, the motor is fully functional. ⚙️ Technical data Manufacturer: SIEMENS Model: 1PH7167-2NF03-0BJ0 Type: 3-phase electric motor Power: 37–45 kW (depending on voltage) Voltage: 350–459 V Current: 76–82 A Speed: 1500 / 1750 / 2000 rpm Duty: S1 (continuous) Protection rating: IP55 / IP54 Encoder: D01 2048 S/R Temperature sensor: KTY 84-130 Standard: EN 60034 Country of manufacture: Germany Gbedpfx Alsyyppnemol 📌 Additional information ✔ robust construction – SIEMENS industrial quality ✔ pulley installed ✔ complete wiring set + encoder ✔ ideal for CNC machines, production lines, industrial drives ⚠️ Condition / remarks Motor in good technical condition Normal signs of use are visible One mounting lug has a small crack (visible in the photo) – does not affect operation. 🚚 Shipping / collection Pallet shipping available Personal collection possible Assistance with transport organization provided

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und neu lackiert mit original Elektrik jedoch neuer WSS Antrieb und Regler in Drehstromtechnik. Optional mit Spritzschutztüren und bedienpult vorne siehe Foto 1000U. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Schwenkwinkelanzeige Obertisch -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Godpfx Aod Ih Dvolmebl Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm weight of the machine ca. 3 t High-End Kellenberger 1500U Ideal for spindle producer or overhauler -BEMA Internal grinding device with separate, cooled motor. Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when it is in position. A quantum leap in safety -Infinitely variable grinding spindle speed 1000-1500 rpm -Infinitely variable internal grinding spindle speed 0-100%. -Digital display of grinding spindle speeds -Swivelling angle display top table -swivel angle display grinding headstock -Marposs gaper sensor for external grinding only -fluid gating sensor Marposs internal grinding -Center height up to 250mm possible Machine is already delivered. Identical machine can be built with additional with additional options. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gbedpfst Ii Rrsx Almsl Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV Lenze, clamping cylinder stroke 25 mm -Type: 63 TGL 30-7312 -Shaft Ø 32 mm -Number: 4x clamping cylinders available -Price: per piece -Dimensions: Ø 90 x 160 mm Godpfxjwzia Ae Almobl -Weight: 5.2 kg/piece

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, HESS RH 1500 2.1 SVA Year of manufacture: 2008 Start: 2009 Gbodsyb Rvkspfx Almol Very good technical condition. Operating until the end of January. In 2022 a new roller for the upper hopper was installed by Topwerk - Hess. Vibrating table completely overhauled Siemens S7 control 3 molds included Price 195000euro Machine is located in Slovenia

Condition: used, first registration: 10/2011, Year of construction: 2011, M&V 902 Container Chassis High Cube Extendable ● ABS ● Air suspension ● Lift axle ● Raise/lower system ● 3 x SAF axles with disc brakes ● Tyres: 385/55 R 22.5 ● Container mounts: 20 ft / 2 x 20 ft / 1 x 30 ft / 1 x 40 ft ● Gross weight: 39,000 kg ● Unladen weight: 6,300 kg ● Payload: 32,700 kg !! Extendable at rear and in the middle !! - German semi-trailer - TÜV / MOT: New on request and at extra cost! Subject to errors and prior sale! = Further information = Gjdpfxox Nc D De Almjbl Please contact Joannis Arpantzanis or Kai Bühler for further details.

Year of construction: 1983, condition: good (used), Ventilator Piller RC VII Gsdsghrx Nspfx Almsbl Motor 11kW DIETZ 5220 1/min

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Gbedpfx Asyhph Eolmsl Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2025, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Gjdpfx Ashl H Ikolmsbl Height adjustable also available with other lengths Inkjet base

Condition: new, color: other, Year of construction: 2024, Year of manufacture: 2024 Empty weight: 500 kg Dimensions (LxBxH): 117 x 245 x 100 cm Bucket capacity: 1,5 m³ CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Gbsdpfxswl Rkkj Almsl Condition CE type: CE Unused Manitou CBA1500 Light material buckets, 2450 mm wide, Bolt-on edge, Multiple on stock

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,899 mm, operating hours: 1,478 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 10 / Mast: 2W5350 ID: 26063.5270 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Cabin width: 1200 mm Year: 20 Operating hours: 1,477 hours Battery capacity: 24V / 930Ah Options: FULL options!! - DOUBLE steering!!! - Special SAFETY gates!! Gedpfxey Itqfo Almjbl - Adjustable forks! - 2 x Blue spot

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 1,236 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 10 / Mast: 2W5350 ID: 26063.5274 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial lift: Yes Cabin width: 1200 mm Year: 20 Hours: 1236 hours Battery capacity: 24V / 930Ah Options: FULL options!! - DOUBLE steering!!! - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot Gjdpfx Aey Itp Uelmsbl

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 7,950 mm, construction height: 3,400 mm, operating hours: 3,590 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F7950 ID: 25012.4087 Category: Used Mast: 3F Lowered height: 3400 mm Lifting height: 7950 mm Capacity: 1200 kg Platform height: 7400 mm Order picking height: 9000 mm Gjdpsy Itcbjfx Almjbl Initial lift: Yes Cabin width: 1300 mm Year: 2017 Hours: 3590 hours Battery capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - SAFETY doors with TILT FUNCTION!! - Adjustable forks! - 2 x Blue spot - Induction / wire guidance - Entry sensor under battery Condition: LIKE NEW!!!

Condition: new, Year of construction: 2018, load capacity: 800 kg, lifting height: 1,800 mm, construction height: 1,510 mm, operating hours: 95 h, fuel type: electric, mast type: duplex, Manufacturer + model LINDE V 10 / 5212 2W1800 mast ID 22071.2130 o 2W mast Lowered height 1510 mm Lifting height 1800 mm Capacity 800 kg Platform height 1200 mm Picking height 2800 mm Cabin width ; 1200 mm Year 2018 Gbsdpey Ir Nmefx Almel Hours 95 hours Capacity 24 v / 620 ah Options NEW / UNUSEDFULL options - DOUBLE Steering - SAFETY DOORS - Adjustable Spoons

Year of construction: 2000, operating hours: 12,470 h, condition: used, Field of application: Construction Gjdpfsx R Twwox Almsbl Empty weight: 65.000 kg Please contact Emal Jaweed for more information

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, GRASSAIR RLR 1500VT screw compressor (screw module by ATLAS COPCO), machine after service with air dryer and frequency inverter (variable speed). Technical data: Gbjdpfx Aeyt H D Uslmsl capacity: 1.70 m3/min (1700 L/min); motor power: 11 kW; max. pressure: 12.5 bar; year: 2010; compressor is fully operational; net price: 8,500 PLN gross price: 10,455 PLN Video link below.

Year of construction: 2010, condition: good (used), SUNMILL VANTAGE JHV – 1500 MACHINING CENTER Gsdpfxjvzg Dyj Almjbl CNC SELCA S 4045 DH YEAR: 2010 WORK PLACE DIMENSIONS: 1,500 mm x 750 mm TRAVELS: X: 1,500 mm Y: 750 mm Z: 750 mm SPINDLE CONNECTION: ISO 40 SPINDLE SPEED: 12,000 RPM HIGH PRESSURE SYSTEM THROUGH THE SPINDLE: 20 BAR POWER: 15 / 20 KW TOOL MAGAZINE: 32 STATIONS CHIP CONVEYOR MACHINES IN EXCELLENT CONDITIONS COMPLETE WITH MANUALS

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 h Year of manufacture: 2022 Recirculating Air Corrosion Change Test Chamber / Salt Spray Test Chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 suitable for corrosion, salt spray, condensation water, and climate change testing applications. The unit is ideal for use in industry, research, development, and quality assurance. Technical Data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring flushing line Year of manufacture: 2022 Test chamber volume: approx. 1,450 liters Temperature / Climate Data: Temperature range (climatic test): +23°C to +70°C Humidity range: 20% to 98% r.h. Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation water test: ambient temperature +5 K to +42°C Electrical Data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant as per nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t LP max.: 17 bar g HP max.: 25 bar g Media Connections: Compressed air / GN2: max. 12 bar Deionized water: min. 3 bar / max. 5 bar Water connection for ring flushing line: max. 6 bar Condensate drain available Exhaust air connection available Power supply: 3/N/PE 400 V / 50 Hz Dimensions (according to drawing): External dimensions: approx. 3710 x 1537 x 1769 mm Test chamber length: approx. 2365 mm Loading height: approx. 850 mm Weight (according to nameplate): approx. 710 kg Operating hours (as indicated): approx. 11,889 h Equipment / Features: S!MPAC / WebSeason touch control panel Ethernet / Network connection USB interface Salt spray Condensation water test Dry climate Gbsdpfsy Hkg Isx Almjl Climate / humidity operation Ring flushing line Storage tank Rod inserts Control cabinet integrated Exhaust air connection Compressed air connection Connection for deionized water Water connection for ring flushing line Condition: used Unit is fully visible as per the images provided. Current status: external operating mode. Display notice: hood not closed. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection by appointment is possible. Loading can be organised. (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, table length 1500 mm table width 1500 mm table load 10 t voltage 380 V Heidenhain D.R.O. Godpjyuqf Ejfx Almjbl Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm