Used Pinch Roll Unit/Strip Leveller for sale (40,203)

Year of construction: 1980, condition: used, strip width 120 - 300 mm strip thickness 1 - 5 mm reference material (tensile strength) 800 N/mm² Cedpfelil Epex Ad Nogt

Year of construction: 1980, condition: used, strip width 120 - 300 mm Codjbidc Ujpfx Ad Nogt strip thickness 1 - 5 mm reference material (tensile strength) 800 N/mm²

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 Cjdpjxc Hr Aefx Ad Negt control as new

Condition: used, strip width: 100 mm Csdoxc Htmepfx Ad Njgt strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new

Condition: used, strip width: 100 mm Codpfx Ajxc Ht Tjd Njgt strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 Cgedpfx Aoxc Hytjd Not revised 1995

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995 Cgedpoxc Hygefx Ad Net

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 Codpfxexc Hyys Ad Njgt revised 1995

Year of construction: 1983, condition: good (used), strip width 1.600 mm Cgsdpfx Adsbidg Ee Net strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm Cgodpfx Aegryl Aed Net No. of pinch rolls: 2

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm Cgjdpfxogm E Rdj Ad Not strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm Cgjdpfx Adsgm E Rlj Not No. of pinch rolls: 2

Condition: excellent (used), Year of construction: 1980, strip width: max. 1.750 mm strip thickness: 0,5 – 3 mm speed: max. 160 m/min No. of pinch rolls: 2 Csdpsxaz Sfsfx Ad Nsgt

Condition: used, Technical details: sheet width: 250 mm Codpeu Ic Ewefx Ad Njgt plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine Cgodpjy Azgwofx Ad Nst 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Cgodpfxoh U Rzgo Ad Njt Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), 13 rolls, Ø 150 mm Cjdpfov S Ad Dox Ad Negt strip width: 600 - 2.000 mm strip thickness: 6 - 15 mm design: 4 hi cassette

Condition: used, For sale: GSW decoiler and GSW straightening machine. Both units are in good used condition (on the decoiler, the motor brake is defective). Decoiler: GSW Serial No.: AHM 1000 433 Load capacity: 1,000 kg Max. coil diameter: 720 mm With arm extension: 1,120 mm Cjdpfeyxbmpjx Ad Nsgt Defect: motor brake (out of tolerance) Price: €3,500 negotiable GSW straightening machine: Serial No.: RMA 32 / 114 Max. sheet width: 290 mm Price: €3,500 negotiable Further information and technical details on the equipment are available upon request.

Year of construction: 1978, condition: good (used), 17 rolls, Ø 66 mm strip width: max. 1.650 mm strip thickness: max. 3,5 mm Csdjbifp Uspfx Ad Negt

Condition: good (used), 5 rolls, Ø 100 mm strip width: 50 - 530 mm strip thickness: max. 5 mm Codpjgq D Acofx Ad Negt

Year of construction: 1990, condition: good (used), 8 rolls, Ø 53 mm Cgjdpfxegq D Ars Ad Nst strip width: 50 - 320 mm strip thickness: 0,4 - 3 mm

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm Cedpjg Iirnofx Ad Njgt strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm

Year of construction: 1975, condition: good (used), 23 rolls, Ø 18 mm Cjdpfx Adobif Egs Njgt strip width: max. 60 mm strip thickness: 0,2 - 0,8 mm

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm Cgodperrl Usfx Ad Not strip width: max. 1.250 mm strip thickness: 0,6 - 4 mm

Year of construction: 1972, condition: good (used), 23 rolls, Ø 16 mm Codpsbif Dyjfx Ad Njgt strip width: 170 mm strip thickness: 0,2 - 1,3 mm