Pinch roll unit/strip leveller

MDS (SCHMITZ)

Year of construction: 1995, condition: good (used), strip width: max. 420 mm strip thickness: max. 12 mm coil weight: 2,4 t Redpfxjbibqwj Agpsn

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor Rjdpfetiy Ntjx Agpen 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 Redpfxoxc Hyyj Agpen No. of pinch rolls: 2 revised 1995

Condition: used, strip width: max. 450 mm Rsdpsxc Hytefx Agpon strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Rjdpfoihf Ufsx Agpon Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: ready for operation (used), Technical characteristics fully automatic center type QUADRA ES205 V04 Bar loading magazine o Max bar length 7500 mm o Minimum bar length 3000 or 1550 mm o Load capacity with axis 100 mm : 20 bars Rsdpfoundhfsx Agpjn o Load capacity with axis 200 mm: 10 bars o Maximum loadable weight: 500 kg Bar positioning unit o Max bar length : 7500 mm o Minimum length of manually loaded bar: 500 mm o Carriage translation speed: 0.60 m/min Milling section 4 machining units o Drilling o Milling o Tapping up to M8 on thicknesses up to 4 mm (aluminium) o Sawing (aluminium) cut 0/90° and +/- 45 Sawing machine Evacuation section Finished parts magazine Power and Motors Power: 35 Kw Overall dimensions Weight: 8420 Kg

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Redotn Rarepfx Agpjn

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm coil weight: 10 t Rjdjqw Akmopfx Agpjn

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Rodpfoif Sg Sex Agpjn Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Year of construction: 1967, condition: good (used), Conversion 2000 hydraulics and electrics, table 3600x400 Rjdolml Drspfx Agpsn