Used Pivapunch Punchin Line Pcc125-E for sale (74,643)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, PivaPunch punching center PCC 125-e - in very good condition with few operating hours. System consisting of coil car, decoiler, straightening machine, loop pit with hydr. transfer tables, automatic punching machine, scrap removal system, exit conveyor, sheet turning unit, stacking system and Siemens system control. Technical data: Coil weight: 10,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,600 mm Material thickness: 0.5 - 1.5 mm Material width: 60 - 1,250 mm Tensile strength: max. 400 N/mm2 Product dimensions: max. 2,500 mm long For detailed technical specifications see PDF. Gedpovxr Tzsfx Alxeit

Condition: good (used), Year of construction: 2007, functionality: fully functional, total length: 33,300 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Insulation glass production line for Low-E glass LiSEC – Austria, h=2.00 m with Gas Press, Sealing Robot, … Glass dimensions: max. 3500 (4500) x 2000 mm Year: 2007. In good condition. Gsdpfx Ajy R Tc Hslxeit Inspection during production is possible by appointment. 1. AKL, vertical edge deletion system for coated glass sheets, 2. RTL-20B (2003), washing and drying machine, 6 brushes, 3. PSL-35/20V (1989), automatic assembly station for insulating glass, 4. FPS-35/20U2B, gas filling press, 5. UKL-35/23VA, tilting table 6. KFL-35/22, horizontal roller conveyor 7. VFL-1D/16 + DOS (PS), automatic sealing system / robot with dosing unit, 8. A complete set of appropriate transport stations (inlet and outlet).

Condition: excellent (used), functionality: fully functional, mileage: 109,560 km, power: 209.62 kW (285.00 HP), fuel type: gasoline, gearing type: automatic, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, Mercedes‑Benz E 300 AMG Line – Elegance you drive. Performance you feel. This Mercedes-Benz E 300 AMG Line is more than just a vehicle – it’s a statement. Powerful lines, a sporty presence, and luxurious comfort combine to create a saloon that impresses both in everyday business and on long journeys. The AMG Line exterior gives the vehicle a dynamic appearance, while the sports suspension and air suspension deliver the perfect balance of sportiness and top-class driving comfort – noticeable on every journey. A real highlight is the MULTIBEAM LED headlights with Swarovski crystals, which not only ensure outstanding visibility but also lend a distinctive look by day and night. Inside, you will find a full range of premium features at luxury-class level: top-quality materials, state-of-the-art technology, and an ambience that radiates calm, quality, and confidence. A car for people who know what they want – and who value style, comfort, and driving pleasure. Transparent note: The left wheels have light, superficial scratches. The price has been adjusted fairly and realistically to reflect this – an excellent opportunity to acquire an exceptionally well-equipped vehicle at an attractive price. Gisdpfey A Hmpjx Alxet 👉 Get in, enjoy, and arrive. This E 300 isn’t waiting for just anyone – it’s waiting for its next owner.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Gijdpfx Alowka S Ujxot Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: used, functionality: fully functional, Hydraulic bar steel shear with punch Manufacturer: Epple Model: E-HPS 65 E-Line Technical specifications Manufacturer Epple Model E-HPS 65 E-Line Stations 5 Punching force 65 t Max. punching capacity Ø 26 x 20 mm Stroke 55 mm Working radius 305 mm Working height 1,030 mm Motor 5.5 kW Dimensions (LxWxH) 1.7 x 0.95 x 1.90 m Gedpfx Aowtqmnslxoit Weight 1.6 t Equipment - Electric contact stop All details without guarantee. A demonstration is available at any time in our exhibition hall.

Condition: used, Year of construction: 2000, Schneidmaschine - Guillotine Schneider Senator SEN78 E-LINEYear 2000 - Serial-No. M-078E-004-10/30-09 Schnittbreite max. 780mm / Cutting width max. 780mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gisdpfx Aoh Ayarolxst Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, functionality: fully functional, machine/vehicle number: NM0LKTP62BSR94836, mileage: 1,000 km, power: 389.81 kW (529.99 HP), fuel type: electric, empty load weight: 12,827 kg, maximum load weight: 14,173 kg, overall weight: 27,000 kg, tire size: 315/70 R22.5, tire condition: 100 %, axle configuration: 6x2, wheelbase: 4,750 mm, axle spacing: 1,350 mm, fuel: electricity, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 3, emission class: none, suspension: steel-air, number of seats: 2, total length: 10,530 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 52 m³, loading space length: 8,300 mm, loading space width: 2,480 mm, loading space height: 2,533 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, central locking, cooling unit, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, non-smoking vehicle, onboard computer, power mirror, retarder, seat heater, tachograph, tail-lift, tire pressure monitoring, traction control, NM0LKTP62BSR94836 - Reference 85231 - Warranty 2+0 years - High-voltage battery warranty 8 years or 400,000 km STANDARD EQUIPMENT: 2,470 Nm torque ▪ Continuous Power 310 kW (421 HP) ▪ Peak Power 390 kW (530 HP) ▪ 8T Front Axle Capacity ▪ 11.5T 2nd Axle Capacity ▪ 7.5T 3rd Axle Capacity ▪ 6-Bag Rear Air Suspension (C6AS) ▪ Disc Brakes Front and Rear ▪ Regenerative Braking Power 390 kW ▪ 4 Battery Packs – NMC ▪ Installed Battery Capacity 392 kWh ▪ Usable Battery Capacity 314 kWh ▪ Charging Type CCS2 – DC Charging – Up to 285 kW, 350A ▪ U-profile Chassis, High Strength, 7mm Thick ▪ 315/70 R22.5 Tyres ▪ 22.5x9.0 Steel Wheels ▪ Pre-Collision Assist ▪ Lane Keeping Alert (LDWS) ▪ Electronic Stability Program (ESP) ▪ Driver Alert System ▪ Moving-Off Information System (MOIS) ▪ Reversing Camera ▪ Blind Spot Information System (BLIS) ▪ Alcohol Interlock Preparation ▪ Traffic Sign Recognition ▪ Emergency Stop Signal ▪ Tyre Pressure Monitoring System (TPMS) ▪ Automatic High Beam ▪ Pre-Collision Assist with Pedestrian Detection ▪ Intelligent Adaptive Cruise Control with Stop & Go (iACC) ▪ EBS: Electronic Braking System with ABS & ATC (Automatic Traction Control) ▪ Differential Lock ▪ Multimedia System with 9” Touchscreen (DAB Radio, Bluetooth, USB (A-Type – C-Type), Apple CarPlay, Android Auto, Remote Control) ▪ Navigation ▪ Enhanced Sound and Thermal Insulation ▪ Air Conditioning ▪ High Voltage Water Heater (Wet Type) ▪ Axle Load Meter (air suspension only) ▪ Adjustable Steering Wheel ▪ Seatbelt Warning ▪ Electric Windows ▪ Air Suspension Height Adjustment via Remote Control ▪ Tinted Side Windows ▪ Premium Seat Fabric ▪ 2 Multifunction Keys with Remote Control ▪ Heated and Electric Side Mirrors ▪ Sideskirts ▪ 4-Point Independent Cab Suspension ▪ Power Distribution Unit ▪ Electrically Tilting Cab ▪ Rain Sensor: Automatic Wipers & Lighting ▪ 95Ah AGM Battery ▪ Electric Air Brake Compressor ▪ Smart Tachograph ▪ Medium Bumper Gedpfex Uzdgjx Alxeit OPTIONAL EQUIPMENT: Steerable Rear Axle ▪ 4,750 mm Wheelbase ▪ Aluminium Alcoa Wheels ▪ Spare Wheel ▪ LED Headlights ▪ Frigo Pack ▪ Side Protection Rails ▪ Refrigerated Truck Body by Carrosserie Matthys: Internal Length 8,350 mm; Internal Width 2,460 mm; Internal Height 2,530 mm; with LL2d and LL1d evaporator; Dhollandia underfloor liftgate 2T; Multi-temp, reinforced roof, side wall drainage; movable and foldable partition wall, with anti-compression hatch; side door in right wall, near the front, opens rearwards, 1000 x 2130 mm, with retractable step Discover our dealers via the website fordtrucksbelux.be Interested? Please feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl - Garage O.C.M. Srl - GTTS Jourdan SA - Herman Noyens Trucks NV - Marc Vansteenland BV

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Gsdswplgbepfx Alxoit Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: used, PLC control, line filter, line filter -Manufacturer: Siemens -Type: Simodrive 6SN 1111-0AA01-2EA0 -Line filter: for regulated feed Giodpfx Asdkk T Tolxet -Power: 80 kW -Sine wave operation block current operation -Dimensions: 275/200/H480 mm -Weight: 23.1 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: M-078E-018-11/20-05E, Schneider Senator 078E-Line paper cutting machine, serial number: M-078E-018-11/20-05E, built in 2005, with air table, side table, light barriers, and program control, in good condition, available immediately. Gisdpfewivimox Alxet If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machines in our facility by appointment.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Gisdjyzxyxspfx Alxot Tool magazine: 118 tools, type 50, DIN 69871

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Giedpfxow A Ng Ee Alxot Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Year of construction: 2008, condition: used, Labelling Machine / Marking System SRD Stano-/Alone-Line Features: * Used labelling machine with integrated marking system * Very robust construction * Condition: fully functional with signs of use * Ideal for fast material handling * Professionally dismantled and packaged Year of manufacture: 2008 Technical Data: Manufacturer: SRD Model: Stano/- Alone-Line Unit: Valentin SPE 106/12 Internal article number: 2026012704 Semi-automatic marking system for image and audio media Refer to the operation manual, wiring diagram, and pneumatic diagram for details Tailor-made solutions for your intralogistics. Godpfoyfgp Uox Alxjit Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your competent partner! We are happy to provide you with a custom quote or assist you with planning or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and excellent network of professionals. We have successfully completed projects for companies from various industries, such as logistics, pharmaceutical, trades, and electronics. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can also supply fully automated sorting technology or additional components such as picking racks or containers.

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. Gsdpfx Ajq N U Duelxeit As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Gijdpfxsv I S D Sj Alxjt Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 1,000 mm, table length: 5,000 mm, table width: 2,000 mm, CNC Gantry Milling Machine Forest Line Seramill 240T – Robust & Precise For sale: Forest Line Seramill 240T CNC gantry milling machine, year 2000 – used, in excellent condition. Perfect for machining large workpieces with high precision. Key Features: Robust gantry design for maximum stability Accurate Siemens 840D control Godpjyfpkbsfx Alxjit Large working area: 5,000 × 2,000 mm Travel: X 5,500 mm | Y 2,900 mm | Z 1,000 mm | A ±135° | C ±180° ISO 50 spindle, max. 6,000 rpm Ideal for series production and individual parts Perfect for carpenters, furniture manufacturers, and production workshops that want to machine large parts precisely. Available immediately! Contact us for details, photos, or a viewing.

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. Gisdpfx Aoq Nywxelxot A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. Gedpfx Aleq Nxrxsxsit 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling Gedpolwtzyjfx Alxjit

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Giedpfx Aern Sqholxet Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Gedsy Rflyspfx Alxeit Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, Year of construction: 2020, functionality: fully functional, Complete Used Peeling Line Complete used peeling line for sale, two available. This line was installed in 2020 and decommissioned at the start of 2025. Each line was previously doing up to 14 tonnes of product a week, can be used for potatoes, carrots, swede, parsnips etc. Each line consists of: Bin tipper dimensions (with frame) approx 2.670 m wide x 1.91m tall x 2.240 m long Large boat hopper. Conveyor belt width 500mm x belt length 1900mm long Elevator with hopper into peeler 3700mm high x 400mm wide Vegetable/potato batch peeler Waste water unit Surge tank with water sprayer Roller inspection table 900mm wide x 2.9m long Gsdpfx Alewak Aiexeit Incline slatted conveyor Belt 400mm wide x 2800m long Surge tank 600mm wide x 2.3m long Dip Wheel Drywhite container Weigher & bagger with metal detector Also includes waste conveyors and all associated control panels. This can be sold as two complete line, one complete line or as individual machines depending on your requirements.

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data Capacity: 212 ml round plastic: up to 2,700 bph 250 ml oval plastic: up to 2,700 bph 1,000 ml round plastic: up to 900 bph 1,000 ml oval plastic: up to 900 bph Application: Glass & PEHD (plastic) Neck finish: Screw-on caps Ø 30–40 mm Twist-off caps Formats: 212 ml, 250 ml, 1,000 ml Scope of Delivery  Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min Conveyor | Breitner | TP 6052 | 2006 | — Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min Rotary Sorter | Breitner | DS 8003 | 2006 | — Feeder | Breitner | SFB 8001 | 2006 | — Conveyor | Breitner | TPK 6042 | 2006 | — Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min Conveyor | Breitner | TPE 6032 | 2006 | — Gsdpfoyighijx Alxoit

Condition: good (used), Year of construction: 2017, For sale / on request: Gijdpfxsy Rkrre Alxst - Kaak Driem line 1 - Kaak Proofer + Euroclima - Kaak Driem line 2 - AMF / Den Boer oven (direct high-temperature fired oven) - Stelram conveyors - Cooling tunnel + ICS chiller - 2x ABB pick and place robots - 2x Fuji packaging machines Total working width: 1200 mm Year of construction: 2017 Documentation and software available. Inspection on location possible. For any questions or remarks, feel free to contact us.

Condition: used, Year of construction: 2008, functionality: limited functionality, Full evisceration line from MEYN. Giodpfx Asy Nndpslxst Maestro with 28 units. All the rest 20 units. Can be sold with units revised with brand new parts as well as shaft.