Used Plasma Nitriding Furnace for sale (1,234)

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP Codpfsxc D E Hex Ahmjhc plasma generator: MAG-Puls was newly acquired in 2008

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Chodpexz Divofx Ahmsc

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Csdpjwmfyvofx Ahmehc Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Chedpfozuabzox Ahmoc Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Chjdpfx Ahox Ek Rdsmjc Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Year of construction: 2024, operating hours: 200 h, condition: new, functionality: fully functional, Dear Mr./Mrs., company Planit have opportunity to offer you new plasma nitriding equipment. Equipment is new, our production, cold wall equipment, used in 10 batches just to be tested. Characteristics of equipment: - Dimension of equipment: 1400x800x2000 - Chamber dimension: D500x600 - Maximum dimension of work piece: D400x500 - Equipment has own lifting device Codpfxjvfdv Ie Ahmehc - Dimension of electrical cabinet: 860x600x2000 - Power supply of equipment: 3x400V,50 Hz - Nominal power of equipment: 18 KW - Nominal power of plasma: 15KW, maximum current 38A, voltage 0-800 VDC - Pulse mode: 0-20kHz,unipolar,changable pulse and pause - Automatic control of arc - 3 gasses supply with MASS FLOW CONTROLLERS (technology of post oxidation) In addition to equipment, we also offer its installation, giving all technology (nitriding,post oxidation), technical documentation. Also, we are making equipment according to customer request.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. The machine is in very good condition. Csdpfx Ahou T N Efomehc

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Csdpfx Ahjvfm I Hjmjhc Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm - Total equipment power: 70 kVA - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.

Condition: not inspected (used), functionality: unexamined, We are selling a used gas console that was previously used in an Eltropuls plasma nitriding system. Included are 4 Bronkhorst mass flow controllers (MFCs) and other control electronics. Chedpsy Sxtgjfx Ahmoc We acquired these specific components as part of a package with other items, but we do not need them. Therefore, the components are offered here, untested, as a source of spare parts for interested parties.

Condition: new, Year of construction: 2026, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. cutting thickness for steel: 22 mm Max. cutting thickness for stainless steel: 12 mm Complete with CAD/CAM software. Data transfer in DWG and DXF formats via USB and network card. CE marking. ISO 9001, GB/T 19001. Cedpfx Asz Epctohmehc 120 A generator. The production cost is incredibly low, requiring only 5.5 kW and compressed air!

Year of construction: 2007, condition: used, functionality: fully functional, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Interface 0-20 mA Chjdpfszul N Rox Ahmec

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Chedsy N Uxgepfx Ahmsc

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. If you have any questions, please feel free to contact me. Chjdpfx Ajy A Trlehmsc

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Cjdpfx Ajx Eg T Eshmshc

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Chedpfx Asz Dhm Ujhmoc

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures. Cedpfx Ahezvfluemehc

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 Chsdpfx Aezu Nvzshmjc - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible. Chedpfx Aoz Da Rlshmec

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included Csdjzizkyspfx Ahmohc CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. W-Technology s.r.o. Csdpfjzz A Rrox Ahmjhc Polní 8 79201 Bruntál Czech Republic

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm Chodez Hcr Dspfx Ahmec - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, sheet thickness (max.): 32 mm, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,500 mm Cedpfez Ebclsx Ahmjhc Max. material thickness: 32 mm MACHINE DETAILS Drive system: CNC Control system: Beckhoff Resonator manufacturer: Hypertherm Resonator type: Powermax 105 Connected power: 16.8 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Shipping weight: 3,000 kg Shipping packages: 1 unit EQUIPMENT Various accessories Spare parts Note: The machine is sold without a dust extraction system.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call. Codpfx Ahjy Annbomehc

Condition: good (used), Year of construction: 2016, functionality: fully functional, Well-maintained plasma cutting machine with a 6,000 × 2,000 mm working area, Kjellberg plasma source, and Donaldson Torit DCE extraction system. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Machine type: Plasma cutting machine Year of manufacture: 2016 Working area: 6,000 × 2,000 mm Plasma source: Kjellberg HiFocus 161 neo Cutting range, sheet thickness: 1–30 mm Codpfoz Hykkjx Ahmehc Extraction system: Donaldson Torit DCE Condition: Good Maintenance: Serviced annually by MicroStep Location: Rottweil The seller can assist with loading.

Condition: used, Year of construction: 2018, functionality: fully functional, Working area: 3000 × 1500 mm Design: Downdraft / fume extraction table Plasma source: Hypertherm Powermax65 Max. current: 65 A Plasma source power supply: 400 V / 3-phase Compressed air: min. ±5.9 bar Chsdpfxez Iniqs Ahmoc CNC plasma cutting machine with automatic torch height control