Used Pmh Twin Screw Extruder25 Mm - 32 L/D for sale (117,314)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). Iisdpfsznkx Dsx Akzeg A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), SM 32/200 sliding module, 200 mm stroke, pneumatic linear actuator, used, minor signs of wear, 100% functional, delivery as per photos. Iiedpfx Aksz Acz Hjzeg

Condition: used, Year of construction: 2006, Main areas of application: Animal feed industry: Production of high-quality sinking or floating fish feed and pet food. Food industry: Processing of cereals, protein concentrates and structured food ingredients. The Kahl LTW 160 twin screw extruder is a high-performance industrial machine from the German manufacturer Amandus Kahl, primarily used for mixing, kneading, cooking, and shaping viscous materials (such as animal feed, fish feed, or food components). The machine is characterized by its modular design and integration into complete, turnkey production lines. Format: Screw diameter (??): 160 mm Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging Iedpfx Akevfxqyjzeig 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers Iodpexygabefx Akzoig -Conveyor belt rollers: Transport rollers, diameter 32 mm -Transport width: 305 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 1.6 kg/pc.

Year of construction: 2009, condition: good (used), Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L -Current: 3x25A PE -Voltage: 415V -Protection class: IP65 -Cable: not included -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg Isdpfx Aox R Svlokzeig

Condition: used, quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Recording dimensions: see photos Iedpeuypzijfx Akzjig -Number: 2x steel holders available -Price: per piece -Dimensions: 115/55/H130 mm -Weight: 1.5 kg/piece

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Iedpfx Ajiyya Aokzjig Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled Iiedpfjiyx Uzex Akzog You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Ijdpfx Akeby Rfpezeig Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Iiodsiv H Ekopfx Akzeg This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: good (used), The scope of delivery includes: 1x Shelf connector, used Material color: Sendzimir galvanized L-profile dimensions: (see below) 298 x 81 mm (4 round holes, Ø 9 mm) Iijdpfx Akoi Dtcnjzog 250 x 30 mm (one oblong hole) Center-to-center distance of round holes: 278 | 50 mm Shelf spacing: approx. 250 mm Weight: approx. 0.600 kg / piece 4x Hex head screws, M8 x 20 8.8. 4x Hex nuts, M8 4x Washers, M8 General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, L & Z Lathe / DREHMA D 410x1500 / New - Unused / Showroom Machine -CE marking -3-axis digital display -Turning diameter over bed: 410 mm -Turning diameter over cross slide: 225 mm -Turning diameter in the crotch: 580 mm -Turning length: 1500 mm -Spindle bore: 52 mm -Speed range (geared): 45 - 1800 rpm -Automatic longitudinal/facing feeds Iedpozv H Ikjfx Akzsig -Threading / Metric / Inch etc. -Tailstock MK 4 -Drive power: 3.5 kW -Central lubrication -Electric chuck guard -Chuck guard via steel support -Fixed and traveling steady rest -Multifix base with inserts -3-jaw chuck 200 mm -4-jaw chuck 250 mm -Faceplate -Coolant system -Work light -Foot brake -Traveling center & drill chuck -Machine feet -Documentation Dimensions: L x W x H 2.2 x 0.1 x 1.6 meters / Weight 1850 kg Errors and omissions excepted.

Condition: good (used), Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos Ijdpezrfb Uofx Akzoig -Transport dimensions: 1110/560/H300 mm -Weight: 195 kg

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg Iiodozkqt Hepfx Akzjg -Roller spacing: 600 - 1670 mm -Rollers: Ø 320 x 950 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Pallet rack: Boltless rack 2 bays / rack length 3900 mm -Field width: 1800 mm -Shelf height: approx. 3200 mm -Stands: 3 pieces 3155/1240/100 mm -Cross braces: 20 pieces 1865/60/240 mm Iiedpfx Akjw Thy Dszjg -Shipping/Price: complete -Transport dimensions: 3200/1250/H660 mm -Total weight: 352 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders Iisdpfsvt Sx Hex Akzeg -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D0630320LV2S01 -Stroke: 95 mm -Piston rod: Ø 32 mm -Hole diameter 30 mm / hole spacing 290 mm -Dimensions: 340/117/H105 mm -Weight: 8 kg.

Condition: used, Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Iijdsd Al Hrjpfx Akzog -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device Iiedpfx Aezg Urlskzog -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 320 - 915 mm -Rollers: Ø 190 x 100 mm -Load capacity: kg -Submission/Price: complete -Transport dimensions: 1000/435/H240 mm -Weight: 70 kg

Condition: ready for operation (used), Heidenhain LS 486C linear scale ML: 1140 mm Id. 329 993-31 SN:13148128 + AE LS 486C reading head Id. 310 727-51, used, in good condition, 100% functional, scope of delivery as shown in photos. Isdpfex Er Epox Akzsig

Condition: ready for operation (used), Heidenhain ID: 203 263 Length Measurement System LS 701 - ML 320 mm SN: 176517F with LS 703 reading head, used, in good condition, 100% functional, delivery as per photos. Iisdoy Nqfvspfx Akzeg

Condition: ready for operation (used), Heidenhain LC 483 / 10nm ML 320 mm ID: 557 649-06 SN:36655545 + AE LC 4x3, used, in good condition, fully functional, scope of delivery as per photos. Iodey Nqg Tspfx Akzjig

Condition: ready for operation (used), To suit MM 321 saddle stitcher with MM 1532 feeder, Price £5,000  IN STOCK Iiodpfxoir E Rqs Akzsg

Condition: new, Steinmeyer ball screw, Ø thread: 14 mm, pitch: 10 mm, Ø pin: 9 mm, Ø shaft: 25 / 20 / 15 / 12 mm, length shaft: 1710 mm, Ø ball cage: 39 mm, Ø flange: 62 mm, unused, 100% functional, scope of delivery as per photos Iiodpfjz Ac Hvex Akzsg

Condition: ready for operation (used), Transroll spindle L = 1110 mm , Ø thread: 40 mm, pitch: 6 mm, Ø journal: 22 mm, Ø shaft: 30 mm, length shaft: 95 mm , Ø ball cage: 63 mm , Ø flange: 87 mm ,used, normal signs of wear, 100% functional, scope of delivery as per photos Iijdjz Ac U Tjpfx Akzjg

Condition: ready for operation (used), Transroll spindle L = 875 mm from Studer S60 adjustment range: 570 mm, Ø 63 mm, pitch: 5 mm, Ø ball cage: 90 mm, Ø mounting flange: 125 mm, Ø pin: 30/40 mm, Ø pin thread: 40 mm, used, normal signs of wear, 100% functional Iedpfxoz Adaws Akzoig