Used Pneumatic Cylinder Assembly, Slide Unit for sale (46,023)

Condition: good (used), Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger Kdjdpfjb A Sygox Afdjk -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Kdodpfx Ajw Uc T Iofdsk Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: used, Year of construction: 2013, Table, rotatable, extendable, and tiltable Dimensions Base dimensions: 2000 x 1750 mm Dimensions (max extended): 4500 x 2500 mm Kjdpfjy Dcicox Afdodk Max. payload when tipping: 250 kg Max. load capacity when lifting: 370 kg Equipment conveyance roller tracks: Rear arrangement consisting of 2 rubber roller strips at heights of 400 and 1700 mm above the support surface for models RU-RGAT...Ü for door lines. Roller rails mounted in front of the uprights at 120 mm spacing. Pre-feed version with automatically retracting plant part during feeding with the table. Roller conveyor on the installation surface made of zinc-plated steel rollers, roller length 200 mm, 2-part split without gap at the split, roller diameter 50 mm, distance between rollers 200 mm. Roller conveyor front open for driving in with the assembly table at the element transfer. Roller height adjustable from 330 to 380 mm. Roller conveyor wagon equipped with 4 flange rollers, of which 2 with locking

Condition: new, Pneumatic Cylinders / Cylinders: 1. FESTO Type: DSBG - 160 - 735 - PPVA - 3 (new). Diameter: 160 x 735 2. Type: BOSCH / REXROTH - 4 units. Kdsdsyvwc Ijpfx Afdsk 3. Type: BOSCH / REXROTH - 2 units.

Condition: as good as new (ex-display), Festo pneumatic cylinders Kedok Abl Nepfx Afdodk RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Kdsdpfegf Ix Asx Afdjk Almost identical linear unit under stock number 59702

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003569 - Manufacturer Code: QS2A50A25PS01 - Condition: As new (showroom item) - Functionality: Fully operational - Compatible machine: - If interested, we offer a refurbishment service, contact us. 1KG 20X20X20 Kodoyrn Nijpfx Afdsdk

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Kdjdpfehxvu Eox Afdek Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Kdsdpsfx Hyfefx Afdjk Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Kdodpfxeh U Dtuo Afdsk Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Clinching unit TOX - Pneumatic-Hydro Toxpress Hydro-pneumatic press TOX Pressotechnik KRAFT PAKET Type CRS 03.62 No.: 207599.2 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 tons Projection: 20 mm Installation height: 32 mm - Built-in clinching tool Ksdpfxsdz Sqqo Afdsdk - Pneumatic valve for control - Push-through joining or clinching - For creating a form-fit connection between 2 sheets without piercing or heating the sheets - Mounted on the stand - with simple electrical control and foot switch Own weight: 230 kg Comes from a production plant, sold without electrical control

Condition: good (used), ManuMatik / KraussMaffei high-pressure cylinders  The high-pressure cylinders come from a commutator press and were in use there until the end.  Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Kdedjhtyxlopfx Afdsk Diameter 8.90 cm The following components are included  Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery 1 x pressing unit Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 15091, Buchdruck Nummerierwerke für Tiegel - Letter Press Numbering units for Tiegel - Cylinder Sünüm - Leibinger Numbering UnitsLetter Press Numbering units for Tiegel - Cylinder Div. Zubehör + Ersatzteile (Nummerierwerke OHT) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Kjdpfx Ajrffnmjfdsdk On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2017, functionality: fully functional, Item number: 470722 Serial number: 470722-5 Material: Aluminum Kodpfeu Raqpsx Afdedk Total weight: 27 kg Dimensions Base plate: 460mmx300mmx25mm Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel: 130mm Total length: 680mm The Tünkers LE100-150 VRL SB T02-4 is a pneumatic linear unit designed for precise and repeatable linear movements in industrial applications. With a pneumatic drive, it is ideal for automated production processes in which exact positioning and stable sequences are required. The robust design ensures a long service life and low maintenance requirements, even under intensive use and demanding conditions. The unit can be flexibly installed both horizontally and vertically, which increases its adaptability to different areas of application. In addition, it is possible to integrate sensors and control components to monitor and control the movement even more precisely. This makes it a versatile and reliable solution for industrial applications where high precision and durability are required.

Condition: new, functionality: fully functional, Item number: 308602 Serial number: 308602-2 Material: Aluminum Total weight: 62 kg Dimensions Base plate: 710mmx400mm Kjdpfeu Rbpaex Afdjdk Upper guide plate: 400mmx400mmx22mm Overall height: 130mm Travel distance: 350mm Total length: 1080mm The Tünkers LE200-300 VRL SB T024 is a pneumatic linear unit designed for industrial applications requiring precise and reliable linear motion. With a robust pneumatic drive, this unit is ideal for automated production and assembly processes where exact positioning is crucial. The robust design ensures a long service life and low maintenance, even with intensive use in demanding environments. The pneumatic linear unit can be mounted flexibly and can be used both horizontally and vertically, allowing it to be adapted to different areas of application. In addition, the linear unit can be equipped with sensors and control components to ensure precise monitoring and control of the movement. It is therefore a versatile and durable solution for industrial applications that require high accuracy, reliability and flexibility.

Year of construction: 2017, condition: new, functionality: fully functional, Item number: 397017 Serial number: 397017-8 Material: Aluminum Total weight: 65Kg Dimensions Kdodsu Rbiyopfx Afdok Base plate: 810mmx400mm Upper guide plate: 400mmx400mmx22mm Overall height: 130mm Travel distance: 450mm Total length: 1280mm The Tünkers LE200-400 VRL SB T024 is a pneumatic linear unit specially developed for applications requiring precise and reliable linear movements over long strokes. With a stroke of 400 mm and a powerful pneumatic drive, this unit is ideal for automated production processes in manufacturing and assembly. The robust design ensures high stability and durability, even under intensive use and demanding environmental conditions, and significantly reduces maintenance requirements. Thanks to its flexible mounting options, the pneumatic linear unit can be installed both horizontally and vertically, which allows it to be used in a variety of applications. The linear unit can also be equipped with sensors and control components to ensure precise monitoring and control of movements. It is a robust and precise solution for industrial processes where reliability, flexibility and precision are required.

Condition: new, Year of construction: 2017, functionality: fully functional, Item number: 397072 Serial number: 397072-3 Material: Aluminum Total weight: 36 kg Dimensions Kdedpfx Aeu Ra T Defdsk Base plate: 610mmx300mmx25mm Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel distance: 330mm Total length: 980mm The Tünkers LE100-300 VRL SB T02-4-61-4 is a powerful pneumatic linear unit designed specifically for precise, linear movements in demanding industrial applications. With a generous stroke of 300 mm and a robust pneumatic drive, this unit enables accurate and repeatable positioning, ideal for automated manufacturing and assembly processes. The robust design ensures a long service life and reduces maintenance requirements, even under intensive operating conditions. Its installation flexibility allows it to be mounted both horizontally and vertically, making it versatile in various industrial scenarios. It can also be equipped with sensors and control components to enable precise monitoring and control of movements. This makes it an ideal solution for applications that require high precision, reliability and flexibility.

Condition: new, Year of construction: 2017, functionality: fully functional, Item number: 397234 Serial number: 397234-6 Material: Aluminum Total weight: 25 kg Kjdpfx Asu Raw Aefdodk Dimensions Base plate: 410mmx300mmx25mm Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel: 130mm Total length: 570mm The Tünkers LE100-100 VRL SB T02 is a compact pneumatic linear unit developed for precise linear movements in industrial applications. With a pneumatic drive, this unit is particularly suitable for automated manufacturing processes where precise and reliable positioning is required. Its robust design ensures a long service life and reduces maintenance requirements, even under demanding conditions. The pneumatic linear unit can be mounted flexibly and can be installed both horizontally and vertically, making it suitable for a wide range of applications. It can also be equipped with sensors and other control components to precisely monitor and control the movements. The Tünkers LE100-100 VRL SB T02 is a versatile and durable solution for industrial applications that require high accuracy and reliability.

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar Kdjdox Tqnrepfx Afdok -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc.

Condition: good (used), Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder Kdsdpfx Asb A Nv Sefdek -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Condition: used, This listing is for a Sysmex PU-17 Pneumatic Unit. The unit is in full working condition and is ready for immediate release. The Sysmex PU-17 Pneumatic Unit vacuum pump is an essential component for haematology analysers, particularly in streamlining blood sample analysis. Features: Kdsdpfxsxxyh No Afdok - Functionality: Vacuum Source: The PU-17 generates a reliable vacuum that is critical for the proper operation of haematology analysers. This vacuum allows the machine to aspirate blood samples efficiently, ensuring that the analyses—like cell counting and haemoglobin measurement—are accurate and consistent. - Compatibility: Designed for Specific Models: It is specifically compatible with Sysmex haematology analysers, such as the Sysmex XN-1000 SA-01. This means that labs using these analysers can integrate the PU-17 easily, ensuring optimal performance without the need for extensive modifications. - Importance in Haematology Testing: Efficiency in Testing: By providing a stable vacuum, the Sysmex PU-17 enhances the reliability of haematology tests, which are critical for diagnosing various conditions, including anaemia and infections.

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 50 mm -Number: 2x available -Price: per piece -Dimensions: 530/65/H90 mm Kdodpfx Ajd Hvh Djfdsk -Weight: 2.9 kg/piece

Condition: good (used), Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 1400 mm -Piston rod: Ø 15 mm -Recording piston rod: M12 x 1.5 mm Kdsdpfxed Rz Dwj Afdok -Pressure: max. 12 bar -Dimensions: 1570/50/H50 mm -Weight: 8.1 kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Kdedpfod Sti Djx Afdjk -Festo type: DSW-40-600 PPV-A -Piston: Ø 40 mm -Stroke: 600 mm -Max. Pressure: 10 bar -Price: per piece -Number: 4 pieces -Dimensions: Ø 46 x 800 mm -Weight: 2.15 kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-40-160-PPV-A -Piston: Ø 40 mm -Stroke: 160 mm Kdsdpfx Afed S A U Sedjk -Max. Pressure: 12 bar -Dimensions: 325/55/H55 mm -Weight: 1.5 kg