Used Pramac Gbw 22 Y P for sale (57,645)

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GWB 22 Y CDS Noise protection hood: 64 dB(A) 7m Rcjdpfx Ajq A U Axsmgsb Continuous power: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Yanmar 4TNV88 BIPGE Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2190 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Electric start Consumption at 3/4 load: 3.87 liters Consumption at full load: 5.17 l/h Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Manual control panel: Key start Voltmeter, ammeter, operating hours counter, Motor fault display Sockets: 1 x Schuko 220V 2 x CEE 16A -230V 1 x CEE 16A -400V 1 x CEE 32A -400V Dimensions: Length: 1645 mm Width: 870 mm Height: 1072 mm Tank capacity: 51 liters Weight: approx. 560 kg Crane eye Forklift can be driven under

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GBW 22 P DDS Noise protection hood: 66 dB(A) 7m Continuous 3-phase power: 20.12 kVA / 16.10 kW Maximum 3-phase power: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Perkins 404J-22G Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2220 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Consumption at 3/4 load: 4.0 liters Consumption at full load: 5.74 l/h Fuel tank capacity: 51 l Generator: MeccAlte ECP28-M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Sockets with FI: 1x 32A - 400V / 5-pole Dimensions and weight: Rjdpfx Ajq A T Dwemgocb Length: 1645 mm Width: 870 mm Height: 1060 mm Tank capacity: 51 liters Weight, dry: approx. 546 kg Central crane loading eye Forklift can be driven under Glow pins Engine preheating PHS Battery charge retention

Condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: Protection class IP21, MeccALte Rcedpfxjq A T Euj Amgob Start type: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg Key start Sockets: 1 x 32 A 400 V 1 x 16 A - 400 V 1 x 230 V Schuko 2 x 16 A 230 V CEE

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Generator with AVR control Rcsdpfxsmw Ui Rj Amgeb Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: like new (used), Year of construction: 2018, operating hours: 214 h, load capacity: 2,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, Manufacturer + model: LINDE L 20 as (1173) * EX * Proplan 2GD / Zone 1-21-22 * Mast: 3F4000 ID: 26065.0442 Category: Demo Lowered height: 1920 mm Rcjdpfx Aozaf I Ejmgob Lifting height: 4000 mm Capacity: 2000 kg Year: 2018 Operating hours: 214 hours Battery: Completely NEW * 24v / 315ah * Year: 2025 Options: * EX * Proplan !!!!! System / Certificate = EPS 16 ATEX 1137 X Gas Group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temperature class = T4 ===== Dust Group = IIIC Type = Cat 2D (approved for ZONE 21 and 22) Temperature class = T 120°C ===== Very UNIQUE explosion-protected ATEX “DEMO” WIDE TRACK - with FREELY ADJUSTABLE fork arms - also fitted with ADJUSTABLE support legs POWER STEERING Complete LIKE NEW!!

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F4650 ID: 26057.5931 Category: Used Mast: 3F4650 Lowered height: 2130 mm Redpfx Amszaf Irjgocb Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Operating hours: 6472 hours Battery: Completely NEW * 48v / 625ah * Manufactured 02/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (approved for ZONE 1) Gas group = IIB Temperature class = T4 Type = Cat 2D (approved for ZONE 21 - Dust) Dust group = IIIB Temperature class = T 135°C - IP 6X Equipped with CONTAINER specs!! - Joystick control forward/reverse - Triplex FFL mast - Front working light - Flash beacon - Blue spot safety light

Condition: like new (used), Year of construction: 2018, operating hours: 4,918 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: TOYOTA LPE 200 * EX * Pyroban 3D / Zone 22 * ID: 24090.5905 Category: Used Forks: 1150 x 570 mm Capacity: 2000 kg Year: 2018 Operating hours: 4918 hours Rodpszaf Acofx Amgocb Battery: Completely NEW * 24v / 344ah * Year 2025 Options: * EX * Atex - Pyroban !!!! Gas group = IIIB Type = 3D (approved for ZONE 22) Temperature class = T4 (135°C)

Condition: like new (used), Year of construction: 2016, operating hours: 930 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer & model: LINDE T 20 * EX * Proplan 3GD / Zone 2 - 22 ID: 25050.8953 Category: Demo Forks: 1150 x 560 mm Load capacity: 2,000 kg Year: 2016 Operating hours: 930 hours Battery: Completely NEW * 24v / 230ah * Year 2025 Rcsdpfxszafz Sj Amgjb Options: Special construction with hydraulically tiltable forks! Ideal for emptying IBC containers * EX * Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: like new (used), Year of construction: 2016, operating hours: 708 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8428 Category: Demo Rcedpfx Ajzafxwomgeb Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 708 hours Battery: Completely NEW * 24v / 230Ah * Year 2025 Options: Special build! With hydraulically tilting forks! Ideal for example for emptying IBCs * EX * Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temp class = T4 Type = Cat 3D (approved for ZONE 22 – Dust) Dust group = IIIB Temp class = T 135°C

Condition: like new (used), Year of construction: 2016, operating hours: 1,176 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8807 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 1176 hours Battery: Completely NEW * 24V / 230Ah * Year 2025 Options: Special build! With hydraulically tilting forks! For example, for emptying IBCs *EX* Proplan! System = ATEX 14 Proplan 3002 X Rcodpezafxqofx Amgjb Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW Rcsdpfx Amsy Ux Dqegob – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, maximum load weight: 26,260 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 11/1992, loading space length: 6,700 mm, * Schmidt container tipping chassis, type CKSA 10/22-20 * First registration: 1992 * Tare weight: 4,740 kg * Payload: 26,260 kg * SAF axles * Air suspension Rcedsy T Tz Uspfx Amgob * Locking mechanism for 20-foot containers * Overall length: 7.80 m * Loading area: 6.70 m

Condition: ready for operation (used), Heidenhain UV 111A ID 317559-22 The price covers only the repair analysis of your component, which you can send to us. After the assessment of your component, you will receive a quotation detailing the actual repair costs. Once you approve the repair, the analysis cost will be waived. As part of the repair process, your component will undergo a complete overhaul and will be supplied with a 3-month warranty from us. Rcodjy Nrlqjpfx Amgeb

Condition: good (used), Year of construction: 2015, C 22 U + IH 30 handling system + ZM 192 additional magazine Machine parameters: Travel in X, Y, Z axes: 450, 600, 330 mm Rcodpfx Amoy Rgfzsgjb Max. spindle speed: 18000 HSK-A63 rpm Description: The machine is in good technical condition, test operation is possible by prior arrangement. Equipped with Hardware KinematicOpt, centre cooling 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Original price was approx. €570,000. Comprehensive specification of supplied components and options available – will be provided upon request.

Condition: used, Year of construction: 2024, functionality: fully functional, Pramac Power Generator P 5000 — Year of manufacture 2024 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Rcedpfxey A Hdbo Amgeb Price EUR 800 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2010, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2010 (XZE-M) 2006 (GL 1020M) Rcsdpfxsg S Twue Amgjb Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO"

Year of construction: 2000, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2000 (XZE-M) 2000 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO" Rsdpfxsg A Hflo Amgocb

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Rodpsx D Skmefx Amgecb Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Year of construction: 1983, condition: good (used), RÜCO double crosscut saw Type 22 Year of manufacture 1983 S/N 10860 Working range : cutting size 2600 x 2200mm smallest cutting width 210mm cutting height 100mm with saw blade Ø 450 = 125mm Technical data: Saw blades each 45° tiltable 2 X main motor 4,0 KW, saw blade Ø 400 mm 2 X scorer 0,56 KW, saw blade Ø 140 mm Weight 1400 Kg space requirement approx. 4400 x 4000 H 1000 mm Transport dimensions approx. 4400 x 1300 H 1300 mm Rjdpfx Amjin E Rqegocb technical data under reserve

Condition: used, Year of construction: 1980, functionality: fully functional, overall weight: 3,730 kg, input frequency: 50 Hz, nominal power (apparent): 1,000 kVA, Equipment: type plate available, For sale: 1000kVA Transformer BEZ BRATISLAVA CZECHOSLOVAKIA Type a T0394/22 Rodpfxsyt El Rj Amgecb 50Hz 15750±5%; 400/231V; 36.66A; 1444A Oil 840kg Total weight 3730kg S1min Net price: €12,000 Price negotiable

Condition: good (used), Year of construction: 2014, operating hours: 245 h, fuel type: hybrid, Drivetrain Drive: Wheel Make of engine: Kubota Weights Empty weight: 5.000 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.250 cm CE mark: yes Rodpfx Amjyf Tyyjgjcb Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 678 m Transport dimensions (LxWxH): (L/B/H): 5,64m / 1,73 m / 2,00 m Additional information Please contact Tobias Mayr for more information

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. Rcedjcwpkpspfx Amgob The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Condition: new, pressure: 220bending length: 6050column width: 5100daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 6775x2650x3250weight approx.: 18.0004 axes (Y1, Y2, X, R): Ja alle Achsen über die Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                            ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)            ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)          ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)          ¤ 16.350,-- Rsdpod Ehh Usfx Amgjcb KK Industries GmbH There's something for everyone!

Condition: new, pressure: 220bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3745x2290x3055weight approx.: 11.2504 axes (Y1, Y2, X, R): Ja alle Achsen über die Delem DA 66 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Delem DA 66 (2D Grafik Steuerung)motor power: 22Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality Esa S640. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Esa S640 standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Rcjdpfx Amod Edhlogob

Condition: new, pressure: 220bending length: 4050column width: 3550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 4740x2290x3050weight approx.: 13.3504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 22 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL Rcsdpfx Amod Ehicjgeb The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                           ¤ 4,529.00 ESA 675 W 3D 21'' touch screen control (Windows Base)           ¤ 6,345.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)         ¤ 10,024.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)          ¤ 16.356,-- KK Industries GmbH There's something for everyone!