Used Pressing Device Tm2000 for sale (23,477)

Condition: new, mechanically adjustable Nljds Adfv Topfx Ab Rjh

Condition: used, Press-fitting device for ceramic pins in rotor shafts Operating principle: The ceramic pins are fed to a testing station via a vibrating feeder and a pneumatic hose, where the position of any existing one-sided bore is checked. This is done using an optical sensor. Incorrectly positioned parts are conveyed to a collection container by a pneumatic slide. Correctly positioned pins are fed to the singulator of the press-fitting tool via another pneumatic hose. The actual press-fitting process is also carried out pneumatically with a roller bearing-guided plunger. First, a manually adjustable pressure p1 is used to ensure that the pin is not pressed too easily into the shaft. Then, with another manually adjustable pressure p2, the pin is pressed fully into the rotor shaft. A disk spring pack preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted, removed, and clamped into the tool by an operator. This process is secured by a light curtain. Design Self-supporting station, integrated into a complete system, for press-fitting ceramic pins and balls. Rotor shafts Diameter: 5 - 20 mm Length: 50 - 200 mm Ceramic pin Diameter: 3 mm Length: 5 +/- 0.2 mm Operating cycle Performance: 15 cycles per minute Safety Protective door with safety switch Light curtain, category 4 Emergency stop Airborne noise emission Continuous sound pressure level at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of manufacture: 2003 Electrically adjustable work table Documentation and circuit diagrams are available. More press-fitting devices – new and used – can be found in our shop! Nlsdpfx Absib H U Ds Roh International shipping costs available on request!

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Nlsdpfx Aovkn Nvjb Rjh

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation Nedpsxzg I Iefx Ab Rolh

Condition: ready for operation (used), functionality: fully functional, Description: Nlodpfx Aoz Rvywob Reh A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Design workshop / toolroom

Condition: used, Year of construction: 2024, Fluke DSX 8000 in good condition. Nljdpfx Absz I Sxps Rjh

Condition: used,  Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Baujahr / Year 2016 - Serial-No. 1224446842 Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Presskraft / Pressing force 12.000N Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Nlsdpjyldg Refx Ab Rsh Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 0000071163, Type: ALPHA20 HOR Equipment / Additional information: Njdpfxjunv Rxe Ab Rolh With tank Refix DE (Fabr. No.: 15 P 0316 90633)

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Nsdpezinzlefx Ab Rolh Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Nljdps Afxmzsfx Ab Rsh Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: Nlsdpefdkb Esfx Ab Reh VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Nodpfxey Ra Ddo Ab Rjlh Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Year of construction: 1992, condition: used, Hydraulic Press Manufacturer: HYDRAP Type: HP SK 40 Year of manufacture: 1992 Technical details: Pressing force: 40 t Effective stroke: 500 mm Drive power: 17 kW Overrun distance: 48 mm Overrun time: 110 ms Nlsdpfxezdvcas Ab Rjh Safety distance: 176 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! Nlodpoz Tf Enofx Ab Rjh TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 90 h, functionality: fully functional, 2007 RYOBI 752P (Wide) Two-Color Reversing Press Reversing 1+1 / 2+0 Maximum Sheet Size: 600 x 788 mm Maximum Speed: 15,000 Sheets per Hour Paper Thickness: 0.04 – 0.6 mm 90 Million Impressions Year: 2007 Equipped with: PCS-G Printing Control System Ryobimatic Dampening System IVS Ink Volume Setter Suction-Tape Feeder Table Semi-Automatic Plate Changer Automatic Roller Washing System Automatic Blanket Washing System Automatic Impression Cylinder Washing System Automated Reversing Unit Changeover Sheet De-Curler Steel Plate in Feeder and Delivery Nsdpfx Ae Aa Ivuob Rjlh Grafix Digital 3000 Powder Spray Device High-Stack Delivery Cylinders are free from damage Rubber Rollers in Very Good Condition Spare Parts Book & Manual Machine Tools

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Nljdpfx Abjztaufs Rjh

Condition: excellent (used), Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge Nedoiraxuopfx Ab Rolh -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar -Limit signaller: Type M1 -Screw connection: see photos -Dimension: 170/135/H135 mm -Weight: 2.1 kg

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t Nlsdpfxozrpulo Ab Rsh blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Hydraulic machine vise, high-pressure clamping device KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Nlodpfx Abod Amwis Rjh Clamping range: 0 to 370 mm Opening width: max. 373 mm Guide rail height: 140 mm - 2 clamping ranges adjustable via pins - Rotating plate Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg Good condition

Year of construction: 2023, condition: used, Hydraulic Press Manufacturer: PROZAP Type: EK0 Bushing Assembly Year of manufacture: 2023 Control system: Siemens Technical data: - Pressing force: 53 t - Stroke: 300 mm - Pneumatic system pressure: 6 bar - Maximum pneumatic supply pressure: 10 bar - Hydraulic system pressure: 255 bar - Dimensions (HxWxD): 3,200 x 2,500 x 2,350 mm - Weight: 8,000 kg In our assessment, the bushing press is in mint condition. Nlsdpfx Aozbvm Iob Reh Technical features: - Press-fitting of bushings, including plastic deformation - TOX pneumatic-hydraulic actuator with 53 t pressing force at 6 bar - 300 mm stroke Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Pressure testing device, measuring device Nodpfsb A Rlysx Ab Rjlh -with trailing-pointer -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg

Year of construction: 2011, condition: used, Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement. Nledpfx Abe Adt Hae Rjh

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. Nedpfx Aed Nnb Rjb Rslh On stock. Sellable immediately. Total price 1000 Euro.

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. Nljdpfx Abj Abbd Ie Roh The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.

Condition: used, TOX Type: EMB 030.068.A.001 TOX Pressotechnik Insertion Press, TOX-C-C-Frame Press Pneumohydraulic manual workstation with process monitoring for inserting functional elements. Technical data: Nodpfx Abjzd Rhkj Rslh Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air preparation: Filtered and dried compressed air, max. particle size 40 µm Air pressure, working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / Return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC, special, complete Electrical connection: 90-230V/AC Ambient temperature, operation: Tmin. = 10°C, Tmax. = 60°C TOX Insertion Monitoring System EPW 500FP, Force/Travel Measurement Holding device ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Safety guard circuit: Leuze B20/B21 light curtain Insertion tool: See (Images 15 to 18) Insertion sleeve (Image 17): 24.5 ∅ mm Application: Insertion Weight: 2200 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.