Used Pressta Eisele Sägeanlage V-Cut for sale (45,486)

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Fpedpfxeqzmnus Ahtok Machine was in operation until dismantling Further technical data on request or see photos

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm Fpedpeyyz Ebjfx Ahtek - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom Fpjdpfx Ahoyyxxfetek • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Year of construction: 2000, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Fedjzfkwbjpfx Ahtspk Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Fpsdpfxew Inudo Ahtek Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Fpsdpfxeyyzxhs Ahtek Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation Fpedpfxsw Nhums Ahtek - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Condition: good (used), Year of construction: 2019, machine/vehicle number: 252-19, Offer 25269 Technical specifications: - Saw blade speed, frequency-controlled for ultra-fine cutting - Saw blade diameter: 200 mm - Automatic work cycle - Pressure stop with SICO counter for setting glass contact pressure – simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW Fodpfx Ahsw R S Nwetopk - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 7978, Corner crimper Prassta 2000 Fpedoztrqrepfx Ahtek Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg We can shipp the machine to your address.

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. Fpjdpozrk Rbofx Ahtjk * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Condition: used, Year of construction: 1994, The price includes several sets of stamping dies as well as new editions. Fpodpfxszqvbcj Ahtjk

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Fsdpfxozp Rnnj Ahtspk Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display

Condition: excellent (used), Year of construction: 2017, fully automatic operation Drive: 7.5 kW, S6, 400 V, 50 Hz, 2850 rpm For use with saw blades D 550 mm Cutting range: 270x140 mm (width x height), D 185 mm Max. profile width: 270 mm Control panel with display Includes piece counter Includes reversing mechanism for a maximum section length of 3000 mm Automatic shutdown via limit switch when the material runs out Hydropneumatic saw blade feed, infinitely adjustable, from bottom to top Vertical and horizontal clamping device, on the feed and discharge side of the saw head Pneumatic dosing spray device Cutting gap widening on both sides of the saw blade Electronic material feed unit, 3-600 mm feed length, with ball screw and servomotor, includes pneumatic horizontal and vertical clamping device, Remaining piece from 75 mm, depending on the profile 2 dust extraction nozzles D 100 mm Fjdpezn H Uhofx Ahtepk Safety guard over the saw head and the feed unit A suitable dust extraction system can be offered as an option!

Year of construction: 2001, condition: used, Profile height: max. 150 mm Fodjzmhqzjpfx Ahtjpk Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spray device 2 pneumatic copying pins with copying pin 5/ 8/ 10 mm

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series Fpsdpozlr Rcofx Ahtek ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 Fodpfx Ahjzi S R Rjtepk • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: good (used), Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm Fpsdpfxsb Hw Dbj Ahtsk -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Feature | Value Drive | Hydropneumatic Maximum punching force | 50 kN at 10 bar Fpjdpfoy Hriwex Ahtjk Stroke | 40 mm Standard installation height (daylight) | 140 mm Maximum installation height | 200 mm Overhang (ram to rear of machine) | 110 mm Table size | 250 × 200 mm Dimensions (W × D × H) | 250 × 450 × 630 mm Weight | approx. 67 kg Operating pressure | max. 10 bar

Condition: used, End mill diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Fpodpfxszfk Sfe Ahtjk Pneumatic workpiece clamping Minimum quantity spray device Pneumatic material feed via foot switch Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Fpodpfxezcpv Sj Ahtok Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Corner jointing machine, Pressta 4000 Fpsdpfx Ahsl Skl Dotok Shipping within the EU: approx. €350

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request Fjdewx I Hvjpfx Ahtopk

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Fpodpsw D T Uiofx Ahtjk Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: good (used), Year of construction: 1993, Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, Double miter saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm Fjdetxkprepfx Ahtjpk -Saw units: swivels 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Fodpexn Iq Djfx Ahtopk Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg