Used Projekt Pr-351 for sale (7,321)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 50 kg, total height: 2,300 mm, total length: 1,500 mm, total width: 1,500 mm, type of input current: three-phase, rotary table diameter: 700 mm, table load: 50 kg, The device is designed to measure radial and axial runout of rims within specified value ranges. The measurement system consists of left and right supports, which can move forward and backward within a range of 330 mm and up and down within a range of 170 mm. This enables simultaneous measurement of the rim at 4 points. The device can operate in manual and automatic modes. Lasdow Hwxwepfx Ammsc

Condition: used, mileage: 520,000 km, power: 256 kW (348.06 HP), first registration: 06/1977, fuel type: diesel, number of seats: 32, gearing type: mechanical, color: beige, Year of construction: 1977, Equipment: parking heater, soot filter, * Setra 212 HM with 32 seats - 6-speed manual transmission - Toilet - Kitchen - Round seating area Lodpfx Amsyy T N Semeac * Diesel - 12,675 cm³ - 256 kW - 350 hp - Euro 0 - No emissions sticker required - 8 cylinders - Air suspension * 32 seats + 1 driver - Auxiliary heater - Radio - Simple door at the front and rear * Vehicle dimensions: Length: 10,370 mm x Width: 2,500 mm x Height: 3,090 mm * German vehicle - German vehicle registration document - Sold on behalf of a customer * Errors/printing errors and prior sale reserved - immediately available * Please schedule an appointment for viewing and test drive * Contact: Andreas Vogel * ATTENTION - Vehicles are stored off-site - Please inquire about the exact location - ATTENTION

Condition: excellent (used), Throughfeed press 3000 mm 14 top cylinders 6 side cylinders Water heating with heating elements in the plate CE marking Year of manufacture: 1996 Lsdex Apxlepfx Ammeac

Condition: excellent (used), Throughfeed press 3000 mm 14 top cylinders 6 side cylinders Ljdoza Duwspfx Ammsac Water heating with heating elements in the plate CE marking Year of manufacture: 1996

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Masterwood Projekt 415L Ljdoy Ilh Njpfx Ammsac 3-axis machine with ISO30 Horizontal router for doors Tool holders Drilling head Tool changer 8 tubeless supports 100m3 vacuum pump Masterwork CAD-CAM Working area 5100 x 1335 mm Machine in full working condition Machine fully checked Machine currently installed in showroom and immediately available Front photocell safety (no mats)

Condition: used, mileage: 680,687 km, power: 95 kW (129.16 HP), first registration: 12/2016, fuel type: diesel, number of seats: 14, gearing type: automatic, next inspection (TÜV): 09/2026, emission class: euro6, color: white, Year of construction: 2016, Equipment: ABS,

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 25,500 mm Number of bays / racking row: 09 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 06 units Pallet spaces per racking row: 54 units Total pallet spaces: 54 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.a. Weight per pallet (max.): 500 kg Included in the scope of supply: 10x Pallet racking uprights, used Material color: Sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.50 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 36x Pallet racking beams, used Material color: yellow Box profile: 80 x 50 mm Beam type: TRV1-270-085-30 CE Clear span: 2,700 mm Agraffe: 5 hooks Max. load per pair of beams 1,500 kg, with evenly distributed load 72x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 40x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Laodpfx Ajzb U S Aemmjc

Condition: ready for operation (used), Zoller CH-2501 projector and transmitted light for H4000, used, in good condition, 100% functional, scope of delivery as per photos. Ledpfoy T Dqtox Ammsac

Condition: used, mileage: 157,000 km, power: 96 kW (130.52 HP), first registration: 01/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,228 mm, total width: 2,100 mm, total height: 2,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * Fiat Dukato Double Cab with Flatbed - 7 Seats - Air Conditioning - TÜV (German Vehicle Inspection Certificate) * Diesel - Engine Capacity: 2,287 cc - 96 kW / 131 hp - Euro 6 - Green Sticker - * Gross Vehicle Weight: 3,500 kg - 6-Speed Manual Transmission - * Vehicle available immediately and ready for collection - Please arrange an appointment to view the vehicle. * Contact Person: Mr. Andreas Vogel * The information provided online is a non-binding description. * It does not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to change, errors, and prior sale. Ljdpfxewlbgcj Ammsac Special Equipment: Storage compartment in the driver's cab roof lining, electric exterior mirrors. Adjustable and heated, reinforced battery, document holder (smartphone/tablet), reinforced rear axle (suspension), padded headrests, radio preparation, 4 speakers, smoker's package, full-size spare wheel (including spare wheel holder), oil level sensor Additional features: Driver's side airbag, brake assist, body/structure: folding side walls, aluminum, body/structure: double cab flatbed, heated crankcase ventilation, adjustable steering column (steering wheel), 2.3 L - 96 kW JTD CAT engine, 4035 mm wheelbase, tire repair kit, low emissions according to Euro 6 emissions standard, seat cover/upholstery: fabric, cab seats: adjustable passenger seat with armrest and lumbar support, cab seats: height-adjustable driver's seat, cab seats: driver's seat with armrest and lumbar support, steering wheel control, flatbed, slightly tinted windows

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Laedoww Im Hepfx Ammjc Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Lsdpfxjyay D Io Ammjac Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Ljdpfx Amex Ebrpsmeac Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data of the Installation: Number of racking rows: 01 pcs Length per row: 22,500 mm Number of bays per row: 08 pcs Number of levels incl. ground level: 02 pcs Volume Specifications: Pallet spaces per bay: 09 pcs Pallet spaces per row: 72 pcs Total pallet spaces: 72 pcs Based on: Load carrier: Euro-pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. horizontal and diagonal braces, upright protectors and foot plates The uprights are pre-assembled (bolted truss construction) Height: 4,000 mm Depth: 1,100 mm 32x beam pairs, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5-hook Max. load per beam pair: 3,300 kg (with evenly distributed load) Note: The load-bearing capacity of the beams remains functional despite the holes— SSI project with thermal dust panels as per manufacturer's specifications screwed on! 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x anchor bolts, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x levelling plates, used Design: fully galvanized For levelling uprights standing on uneven floors 01x load capacity sign With information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. Any requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on delivery location and scope. Laodpfx Ajyaxmhsmmsc

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the setup: Ljdpoyapf Isfx Ammeac Number of racking rows: 01 unit Length per racking row: 14,040 mm Number of bays per row: 05 units Number of levels plus ground level: 02 units Volume data: Pallet locations per bay: 09 units Pallet locations per row: 45 units Total pallet locations: 45 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum pallet weight: 1,100 kg Scope of delivery includes: 06x pallet racking frames, used Material finish: Sendzimir galvanized Frame type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, frame protectors, and base plates Frames are pre-assembled (bolted truss design) Height: 3,600 mm Depth: 1,050 mm 20x pallet racking beams, used Material color: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,300 kg, with evenly distributed load Note: Functionality of the beams is ensured despite holes (SSI project with heat protection plates bolted as per manufacturer’s specifications) 40x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Material: fully galvanized For leveling racking frames placed on uneven floors 01x load sign With specification of bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on delivery location and scope of delivery.

Year of construction: 2024, condition: used, General information New: Yes Technical information Power: 95 kW (129 HP) Chassis type: rigid Empty weight: 7.682 kg Lasdpfsx E Nhnox Ammec Make of engine: Deutz Top speed: 40 km/h Functional Lifting capacity: 3.500 kg Lift height: 608 cm Other information Rental currency: EUR Production country: FR Additional information Please contact KEY-TEC Sales for more information = Additional options and accessories = - Air conditioning

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: Lodpfxoywpt Ie Ammsac - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Ledpfovu U Itex Ammoac Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Laedpsulac Tjfx Ammoc Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,050 kg, lifting height: 4,200 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, emission class: euro5, mast type: telescopic, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, hydraulics, low noise, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3514T – The powerful telehandler for versatile applications Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to the telescopic boom, the loader can lift loads of up to 1.4 tons to a height of up to 4.4 meters. Powerful engine: The Yunnei DEF20CFF4 50 hp engine ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R Loader 3514T offers a spacious, air-conditioned comfort cab with an adjustable seat, diesel auxiliary heating, and rearview camera. This allows you to carry out even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic boom • Extensively optimized in Germany • Powerful and versatile - versatile • Compact design ensures good maneuverability • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Rearview camera with display • Adjustable steering column and seat • Joystick with electric gearshift for precise control • Additional control circuit for attachments Ljdpfxordhx Tj Ammoac • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp (36.8 kW) Emissions class: Euro 5 Lifting capacity: 1400 kg Lift height: 4401 mm (bottom edge of standard pallet fork) Unloading height: 3373 mm (bottom edge of standard bucket, tipped out) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5210 x 1690 x 2560 mm Weight: 4050 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressing force: 35 t, operating speed: 10 mm/s, table width: 60 mm, total height: 2,510 mm, overall weight: 3,250 kg, travel distance Y-axis: 590 mm, working width: 1,250 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Laedpfov Eam Nox Ammoc Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Year of construction: 2026, condition: new, functionality: fully functional, Corrugated box making machine is a machine designed for the production of cardboard boxes. Boxmaker is very easy to operate and adjust. It is characterized by very fast and precise work as well as the possibility of very easy adjustment of the machine. Technical details:  working width: 2400mm  large touch screen 15"  all settings for box production is controlled from touch screen  all set up is automatically simultaneously, 1 minute set up  capacity: ≈ 800 boxes per/hour  minimum board size (WxL): 200 x 400mm (minimum box 100x100x100mm) Lasdpfx Aowt S Dzemmoc  maximum board size (WxL): 2400mm x unlimited  table feeding  segment slotting knives: 600mm (200 + 4x100mm)  slot width: 8mm  4 scoring wheels  3 circular knives for longitudinal cutting  cross cutting  multi cutting  gluing unit (cold glue by Robatech)  VPN connection  preprogrammed FEFCO styles (more than 40 fefco codes)  self design option  catching table  voltage: 3x380V  installed power: 10.85 kw

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, pressing force: 100 t, stroke length: 215 mm, table length: 4,100 mm, Equipment: CE marking, High quality fully serviced Bystronic 4metre cnc pressbrake for sale PR100 100 x 4100 Make: Bystronic Edwards Pearson Model: PR 100 Pressure Reference Year / new: 2005 Total axis: 4 – 2axis back gauge X R – complete with 2 additional fingers on the back gauge, 4 fingers in total. With built in hemming table for producing sheet metal flashings or safety edges on sheet metal Ljdpjzdgnnefx Ammjac Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Cnc control: Cybelec Modeva 10S control Max stroke 215mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, AGFA Avalon N16-50 (Screen PT-R16000II) from 07/2011 manual plate loading internal punch laser head with GLV-Technology Lodjzf Iqxepfx Ammoac plate size: 1470mm x 1165 mm up to 16 plates/h in full format only approx. 88.000 plates exposed online L-bridge to G & J Quartz III 125 plate processor AGFA ST 125 SX plate stacker Screen EP-B101 network Interface-box AGFA Apogee Prepress RIP/Workflow All offers are subject to prior sale

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Pr200 200 x 4100 Make: Bystronic Laedpfjzcw Uvex Ammjc Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Cnc control: Cybelec Max stroke 415mm Rapid approach 190mm/s Bending cycle 10mm/s Rapid return 150mm/s

Condition: new, Very robust, motorized 3-roll bending machine Weight: 670 kg Equipped with hardened rolls Hardness: HRC 28-32 Min. sheet thickness: 0.5 mm Max. sheet thickness: 3 mm Max. working width: 1000 mm Pre-bending: 2.5 mm Roll diameter: 95 mm Motor power: 1.5 kW Lasdpfx Amega Tz Ajmec INCLUDES * Hardened rolls * SCHNEIDER electrical components