Used Proton Powder Coating Systems for sale (35,187)

Year of construction: 2018, condition: used, The year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to a maximum of L x W x H: 8,000 x 2,000 x 2,000 mm, maximum crossbeam load: 2,000 kg/carriage, material: steel. Ljdpfxsy T Nzdo Aiieab Pos. 1: Washing booth, Jumbo-Clean with stainless steel interior for degreasing/phosphatizing of steel, either automated or with manual spray lance. Pos. 2: 1 set of belt filters. Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing booth, including a central lance. Pos. 4: 1 fresh water treatment system. Pos. 5: 1 manual conveyor with 1 electric cross-travel carriage. Pos. 6: 1 lifting/lowering station, Jumbo-Lift 2000, integrated into the cross-travel carriage. Pos. 7: 1 indirect gas-heated flash-off oven/powder drying oven/wet coating drying oven, door opening W x H: 2,800 x 3,100 mm, clear length: 9,500 mm, overall W/H/L approx.: 4,000/5,000/10,000 mm. Pos. 8: 1 end-face powder coating extraction system for an on-site painting booth for spraying and drying operations. Pos. 9: 1 manual coating unit, OptiFlex(R)2. Pos. 10: 1 structure for on-site steel construction. Pos. 11: Control cabinet.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Automatic Wagner powder coating plant, year of manufacture 2012 - Wagner SuperCube booth - Wagner SuperCenter powder supply system - PBS filter and cyclone 18,000 m³/h - STS CO2 extinguishing system Ljdpfx Aiey Icfxsioab - Pre- and post-coating stations with scissor lift platforms - Clearance dimensions (H): 2500 mm, (W): 1000 mm - 12 automatic guns + manual powder coating units Disassembly by arrangement at our facility in Bad Laer! Price upon request

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing oven Conveying technology (cycle process) Lsdpfx Aijum Ufljisab Electrical control system

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: Ledpjhfv D Sofx Aiisab tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Condition: used, Year of construction: 2011, total height: 3,900 mm, total length: 48,000 mm, total width: 12,000 mm, space requirement length: 48,000 mm, space requirement width: 18,000 mm, Equipment: cabin, SAMES automatic powder coating system The offer includes the following components: 1. Automatic transport system with a travel speed of 1 m/min and a DEMAG elevator 2. Surface preparation components: - Water treatment system - 3 water tanks - Surface preparation tunnel 3. Dryer with RX500 thermoreactors measuring 5.0 m long and 2.4 m high, along with a control unit 4. Painting unit components: - Spray booth - 2 RFV 2000 manipulators - Powder coating mixing center Laodpfewcfppex Aiijb - Control cabinet - 6 powder applicators - PVV recycling kit - Filter unit - Filter press - Tanks for the powder coating mixing center - Fire extinguishing unit - Paint shop control system 5. RX500 thermoreactor oven measuring 9.0 m long and 2.4 m high, along with a control unit

Condition: good (used), Paint roller machine, roller coating machine, powder coating system Lodpfxsgal Ags Aiisab -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. Laodpfx Aow Ek Nteiisb The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Condition: new, Year of construction: 2025, ✅ Get to know our fully automated powder coating systems for maximum production capacity! Professional powder coating is essential for making metal surfaces durable, corrosion-resistant, and visually appealing. If you want to coat large quantities in your company and achieve maximum efficiency, our fully automated powder coating systems are exactly the right choice. 🔧 Proton Maschinenbau GmbH offers you intelligent, fully integrated system solutions for economical and consistently high-quality production. _____ 🔍 Impressive technology – Our system technology at a glance: ✅ Spray pretreatment line in tunnel design ✅ Drying ovens (available in U-, M-, or L-shape) ✅ Fully automatic powder coating booth – PVC floor for easy cleaning and quick color changes – Housing options made of stainless steel, powder-coated sheet steel, or PVC – ATEX-certified lighting units – Pneumatic floor cleaning system ✅ Automatic painting robots (1-, 2-, or 3-axis models available) ✅ Automatic powder coating guns ✅ Central powder coating station ✅ Monocyclone jet pulse filter unit (adapted to booth size) ✅ Curing ovens (U-, M-, or L-shape available) ✅ Conveyor systems (single-line or Power & Free system) ✅ Central control panel with touchscreen (from 7" display size) _____ 🎨 Housing colors to suit your taste – at no extra charge! Our machines are available in two modern color options: Yellow-white or anthracite-white – tailored to your corporate design or aesthetic preferences. Our customers can choose between these two combinations at no extra cost. _____ 🎯 Why a powder coating system from Proton? Lajdpfewbh Npox Aiisb ✔️ Modular and scalable as needed ✔️ Layout planning tailored to your location ✔️ Maximum automation through numerous options ✔️ Compliance with European standards (CE, ATEX) ✔️ Energy-efficient and low-maintenance _____ 💡 Configure your system now! Use our powder coating configurator on our website to put together your customized system. Once the configuration is complete, our engineering team will create a customized concept for your requirements. _____ Proton Maschinenbau GmbH – Powerful technology. High performance. Worldwide trust.

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Laodpfx Aoun Sd Ujiisb Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Year of construction: 2023, condition: new, functionality: fully functional, 2x ICM19 Standard system designed for operation at ambient temperatures of 5 °C - 30 °C GA-drawing according to NEA standard arrangement P&ID No. EX-Protection PSR 11 + ATEX protective systems Power Supply 380 V ± 5% - 50 Hz Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C. (altitude of installation side < 500m a.s.l.) Ljdew Snm Uspfx Aiisab Capacity Range 137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge Nominal Capacity 319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation) Details for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³

Condition: new, Year of construction: 2025, MANUAL POWDER COATING PLANTS AND SYSTEMS Lasdpfx Aievv Nuqsisb Our design department will give you the best customized powder coating line solution which meets your product capacity demands. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Ledoy T N Iqepfx Aiijab

Condition: excellent (used), functionality: fully functional, BMB Coating System for Printed Circuit Boards, Model TUA-200 / 2 in EXCELLENT condition. Purchased: 2023 (as-new condition) and only in operation for 6 months. Version: Professional Version (excellent feature set) - High speed coating up to 4x faster - 3 coating processes in one unit - Suitable for components up to 1200x570 mm - Permanent viscosity/temperature control Lasdpfx Aov I Tb Eeiiob - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by encapsulating components with coating - (Digital job-documentation system, currently under review) - Large paint tank capacity for tall components - Paint consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM System (equipment subject to clarification), you can track at any point which component was produced, when, where, by whom, and how. All requirements regarding ISO/TS 16949 are fulfilled. When setting up a tool, the PDM system automatically recognizes all necessary parameters for coating. Work instructions, videos, technical data sheets, processing notes, etc. – everything at your fingertips! 19″ swivel smart touch panel Viscosity control Tool monitoring: automatic recognition and adjustment Electrically height-adjustable machine Coating processes: - Dip Coating (DipCoat) - Selective Contact Coating (SCC®) - Selective Transfer Coating (STC®) The system can be shipped by freight carrier upon request. #8300

Condition: used, Year of construction: 2018, Wagner electrostatic powder coating system for enamel application, year 2018, serial number 30210, with a touch screen control panel, consisting of: Ljdpfxjy Tn Atj Aiijab • 1 PVC spray booth with overall dimensions of length x width x height: 3200 x 2130 x 4000 mm • Dimensions of the part entry/exit opening: 1000 x 1000 mm • 1 HERDING filter (cyclone) with automatic powder recovery • 1 shaker for powder suspension with extraction and powder recovery • 1 EP powder feeder with 32 pumps (injectors) • 12 automatic spray guns, model PEA-C2, for enamel application, with a double blade head • 9 universal EPG/S2 control units for powder guns • 1 GCA compressed air treatment unit used in the system (heating/humidification) • 1 overhead monorail transport system, 35 m long, serving the spray booth. The line is located at the parent company in Italy, near the town of Pordenone. Direct contact is possible, upon prior arrangement.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, paper width (min.): 2,100 mm, paper height (max.): 120 mm, total length: 3,300 mm, total width: 3,500 mm, total height: 2,100 mm, Bürkle LFC 2100 Liquid Coating System Object: For liquid coating of digitally printed media. Suitable for applying primers or protective coatings, as well as for the full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct coating curing using UV radiation from above. Condition: Like new (date of purchase 2023) Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was acquired from the company Welte in 2023 and has only been in operation for a few hours since then. It is in excellent optical and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with extraction, as well as a second roller (smooth roller). Technical Data & Highlights Maximum working width: 2,100 mm Substrate thickness: Flexibly adjustable up to 80 mm Ljdpfx Asy Szwusiisab Throughput speed: Continuously adjustable (up to 25 m/min) Drying: Includes a powerful UV drying unit (TRUV) for immediate further processing Control: Modern control panel for precise process control Asking price €150,000 (negotiable) plus VAT | ex works (EXW) Contact & Inspection The system is still assembled and can be inspected and tested on site after prior appointment. (Location: St. Martin bei Lofer, Austria)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Ljdpfxeyg H Ere Aiisab Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Lsdofz Dubjpfx Aiioab The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Lsdpfx Aisfx Nfmeisab Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, 🏭 POWDER COATING BOOTH KPP Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Lsdpfx Asfy T Tbjiieab Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Lasdpsfz Apqjfx Aiieb Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor Lsdpsfz A Iljfx Aiieab A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Lsdpsfz U Nbofx Aiijab 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Ledpfx Ajfzktzeiisab Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Laedpefz Dt Nsfx Aiisb The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Ljdpjfz I D Defx Aiijab The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.