Used Pulsed Solar Simulator for sale (993)

Condition: good (used), Berger Type: PSS 8 Berger Solar Simulator, Pulsed Solar Simulator Solar Simulator PSS 8 230 Volt, 50 Hz, 1000 W, 3.15 ATT Nsdpfxjzdqvhe Aa Iolc Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Nedpfjxbd Raex Aa Ijlc Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Nlodpfx Aaoxukbxs Iec Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: S2926SMA0099.10801, Laminator from the Swiss company 3S ( Swiss Solar Systems ). Data available in photos. Nlodpfx Aajvad Imo Ijc

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler Nljdpsytpbisfx Aa Iec - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: X2001/023, Titus™ is the smallest, lightest, and easiest-to-integrate laser marking head in the world. That’s exactly what makes Titus™ ("tiny tubus") so outstanding, and why the world’s smallest laser marking head will remain compact. This makes it the ideal solution wherever production environments have limited space: with Titus™, the new 20 W and 30 W fiber laser markers Y.0200-xs and Y.0300-xs are not only incredibly small, but also extremely easy to integrate. Nedpfx Aow Nprgea Iolc This opens up new application areas for rapid direct part marking with lasers, especially in the automotive, aerospace, and electronics industries. Thanks to its high integration flexibility, strong throughput, and significant operating cost savings, Titus™ enables customers to fully realize their marking potential. Think small. Achieve bigger. Main fields of application: Electronics industry, automotive manufacturing, automotive supply industry, system integrators, plastics and metalworking industries, mechanical and tool engineering, marking on stationary or moving parts.

Condition: used, mileage: 184,000 km, power: 145 kW (197.14 HP), fuel type: diesel, gearing type: automatic, first registration: 09/1989, color: white, number of seats: 10, Year of construction: 1989, ORION II LOW-FLOOR BUS / SHOWROOM / EXHIBITION VEHICLE / SUITABLE FOR HISTORIC LICENSE (H-PLATE) / GERMAN REGISTRATION / V8 DIESEL ENGINE WITH 8.2 L DISPLACEMENT VEHICLE HISTORY - GERMAN VEHICLE - GERMAN REGISTRATION - IMMEDIATE CLASSIC (H-PLATE) REGISTRATION POSSIBLE - RARE US SPECIAL VEHICLE - FORMER PROMOTIONS AND SHOWROOM VEHICLE - YEAR OF MANUFACTURE: [please specify] - MADE IN THE USA - MANUFACTURER: BUS INDUSTRIES OF AMERICA INC., ORISKANY, NEW YORK - VIDEO OF INTERIOR AND EXTERIOR AVAILABLE UPON REQUEST. FOR MORE INFO ABOUT THIS VEHICLE PLEASE CALL DIRECTLY. VEHICLE EQUIPMENT - ORION II LOW-FLOOR BUS - SHOWROOM CONVERSION - TRADE SHOW VEHICLE - ROADSHOW VEHICLE - EVENT VEHICLE - V8 DIESEL ENGINE - AUTOMATIC TRANSMISSION - LOW ENTRY - LARGE OPEN INTERIOR - SEATING WITH STORAGE - EXTENSIVE DISPLAY AREAS Nledpfxjzgqp Te Aa Iec - HUAWEI FUSIONSOLAR EQUIPPED - SOLAR TECHNOLOGY DEMO VEHICLE - SPECIAL CONVERSION - LARGE REAR DOORS - IDEAL AS A MOBILE EXHIBITION UNIT - HIGH-VISIBILITY PROMOTIONAL VEHICLE SPECIAL FEATURES - EXTREMELY RARE ORION II LOW-FLOOR BUS, MADE IN THE USA - PROFESSIONALLY CONVERTED FOR HIGH-END PROMOTIONS AND SHOWROOM EVENTS - PERFECT FOR TRADE SHOWS, EVENTS, ROADSHOWS, MOBILE CONSULTING, OR PROMOTIONAL USE - ALSO IDEAL FOR CONVERSION TO FOOD TRUCK, MOBILE BAR, INFO BUS, OR EXHIBITION VEHICLE - IMMEDIATELY OPERABLE IN GERMANY DUE TO EXISTING REGISTRATION - ELIGIBLE FOR HISTORIC LICENSE (H-PLATE), ESPECIALLY INTERESTING FOR COLLECTORS AND BUSINESSES - CLASSIC AMERICAN LOW-FLOOR DESIGN WITH UNIQUE LOOK - HIGHLY DISTINCTIVE AND ATTENTION-GRABBING TECHNICAL INFORMATION - MANUFACTURER: BUS INDUSTRIES OF AMERICA INC. - MODEL: ORION II - YEAR OF MANUFACTURE: September [please specify year] - FUEL: DIESEL - OUTPUT: 145 KW AT 2,600 RPM - V8 ENGINE - PERMITTED GROSS VEHICLE WEIGHT: 9,000 KG - TIRE SIZE: 255/80 R22.5 - LOW-FLOOR DESIGN - HEAVY SPECIAL CONVERSION - LARGE SIDE SURFACES FOR ADVERTISING OR BRANDING FURTHER DETAILS - VEHICLE AVAILABLE IMMEDIATELY - VEHICLE RUNS AND DRIVES WITHOUT ISSUE, HOWEVER: EMITS SMOKE!! - TIRES IN GOOD CONDITION - ORIGINAL US VEHICLE WITH GERMAN REGISTRATION - GROSS VEHICLE WEIGHT: 9,000 KG EXPORT EXPORT SALES ONLY WITH MIN. DEPOSIT OF €500 – €2,000 EXPORT REGISTRATION (EXW) POSSIBLE WITHIN 10 MIN. (APPROVED EXPORTER) VEHICLE RESERVATIONS ONLY ACCEPTED IN WRITING. ORAL AGREEMENTS ARE NON-BINDING. NO PRICE NEGOTIATION BY PHONE. FIXED PRICE. IF YOUR BUDGET IS INSUFFICIENT, PLEASE ONLY INQUIRE FOR VEHICLES IN YOUR PRICE RANGE. SPECIFICATIONS, ERRORS, AND PRIOR SALE SUBJECT TO CHANGE. LEGAL NOTICE THIS LISTING DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF §145 BGB. IT IS FOR THE PURPOSE OF INITIATING A CONTRACT ONLY. ALL INFORMATION PROVIDED WITHOUT GUARANTEE. NO WARRANTED CHARACTERISTICS. SALE IS SUBJECT TO OUR GENERAL TERMS AND CONDITIONS ONLY.

Condition: used, mileage: 184,000 km, power: 145 kW (197.14 HP), fuel type: diesel, gearing type: automatic, first registration: 09/1989, color: white, number of seats: 10, Year of construction: 1989, ORION II LOW-FLOOR BUS / SHOWROOM / EXHIBITION VEHICLE / SUITABLE FOR HISTORIC LICENSE (H-PLATE) / GERMAN REGISTRATION / V8 DIESEL ENGINE WITH 8.2 L DISPLACEMENT VEHICLE HISTORY - GERMAN VEHICLE - GERMAN REGISTRATION - IMMEDIATE CLASSIC (H-PLATE) REGISTRATION POSSIBLE Nlodoy R H T Sepfx Aa Iec - RARE US SPECIAL VEHICLE - FORMER PROMOTIONS AND SHOWROOM VEHICLE - YEAR OF MANUFACTURE: [please specify] - MADE IN THE USA - MANUFACTURER: BUS INDUSTRIES OF AMERICA INC., ORISKANY, NEW YORK - VIDEO OF INTERIOR AND EXTERIOR AVAILABLE UPON REQUEST. FOR MORE INFO ABOUT THIS VEHICLE PLEASE CALL DIRECTLY. VEHICLE EQUIPMENT - ORION II LOW-FLOOR BUS - SHOWROOM CONVERSION - TRADE SHOW VEHICLE - ROADSHOW VEHICLE - EVENT VEHICLE - V8 DIESEL ENGINE - AUTOMATIC TRANSMISSION - LOW ENTRY - LARGE OPEN INTERIOR - SEATING WITH STORAGE - EXTENSIVE DISPLAY AREAS - HUAWEI FUSIONSOLAR EQUIPPED - SOLAR TECHNOLOGY DEMO VEHICLE - SPECIAL CONVERSION - LARGE REAR DOORS - IDEAL AS A MOBILE EXHIBITION UNIT - HIGH-VISIBILITY PROMOTIONAL VEHICLE SPECIAL FEATURES - EXTREMELY RARE ORION II LOW-FLOOR BUS, MADE IN THE USA - PROFESSIONALLY CONVERTED FOR HIGH-END PROMOTIONS AND SHOWROOM EVENTS - PERFECT FOR TRADE SHOWS, EVENTS, ROADSHOWS, MOBILE CONSULTING, OR PROMOTIONAL USE - ALSO IDEAL FOR CONVERSION TO FOOD TRUCK, MOBILE BAR, INFO BUS, OR EXHIBITION VEHICLE - IMMEDIATELY OPERABLE IN GERMANY DUE TO EXISTING REGISTRATION - ELIGIBLE FOR HISTORIC LICENSE (H-PLATE), ESPECIALLY INTERESTING FOR COLLECTORS AND BUSINESSES - CLASSIC AMERICAN LOW-FLOOR DESIGN WITH UNIQUE LOOK - HIGHLY DISTINCTIVE AND ATTENTION-GRABBING TECHNICAL INFORMATION - MANUFACTURER: BUS INDUSTRIES OF AMERICA INC. - MODEL: ORION II - YEAR OF MANUFACTURE: September [please specify year] - FUEL: DIESEL - OUTPUT: 145 KW AT 2,600 RPM - V8 ENGINE - PERMITTED GROSS VEHICLE WEIGHT: 9,000 KG - TIRE SIZE: 255/80 R22.5 - LOW-FLOOR DESIGN - HEAVY SPECIAL CONVERSION - LARGE SIDE SURFACES FOR ADVERTISING OR BRANDING FURTHER DETAILS - VEHICLE AVAILABLE IMMEDIATELY - VEHICLE RUNS AND DRIVES WITHOUT ISSUE, HOWEVER: EMITS SMOKE!! - TIRES IN GOOD CONDITION - ORIGINAL US VEHICLE WITH GERMAN REGISTRATION - GROSS VEHICLE WEIGHT: 9,000 KG EXPORT EXPORT SALES ONLY WITH MIN. DEPOSIT OF €500 – €2,000 EXPORT REGISTRATION (EXW) POSSIBLE WITHIN 10 MIN. (APPROVED EXPORTER) VEHICLE RESERVATIONS ONLY ACCEPTED IN WRITING. ORAL AGREEMENTS ARE NON-BINDING. NO PRICE NEGOTIATION BY PHONE. FIXED PRICE. IF YOUR BUDGET IS INSUFFICIENT, PLEASE ONLY INQUIRE FOR VEHICLES IN YOUR PRICE RANGE. SPECIFICATIONS, ERRORS, AND PRIOR SALE SUBJECT TO CHANGE. LEGAL NOTICE THIS LISTING DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF §145 BGB. IT IS FOR THE PURPOSE OF INITIATING A CONTRACT ONLY. ALL INFORMATION PROVIDED WITHOUT GUARANTEE. NO WARRANTED CHARACTERISTICS. SALE IS SUBJECT TO OUR GENERAL TERMS AND CONDITIONS ONLY.

Condition: used, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Model: WT-2000PV Nodopvkt Sepfx Aa Iolc Type: µ-PCD Condition: Used

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. Njdpfx Aaozd Ukpj Ielc The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: excellent (used), Here, we offer you an inspection system for crystalline silicon solar modules. Reliable quality assurance and process control throughout the entire solar module production. The Dr. Schenk SolarInspect series was developed to meet the specific requirements in the production of crystalline silicon solar modules. These ready-to-use vision systems provide reliable quality control for the entire ongoing production process. Furthermore, continuous monitoring of the production process allows for timely corrective measures to be taken in the event of process deviations. In the production of crystalline silicon solar modules, textured glass substrates are used instead of uncoated glass. Textured glass increases the transmission of sunlight. The optical signals in the vision system, triggered by the surface structure typically used for glass substrates in silicon solar modules, are often similar to or even stronger than those of the actual defect being inspected. Dr. Schenk has developed and manufactured SolarInspect, a system that specializes in the precise differentiation between glass structure and defects on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect glass defects and distinguish them from the glass structure. Reliable inspection of: - Uncoated incoming glass - Uncoated textured glass - Coated glass, e.g., AR (anti-reflective) coated - Layer application - Finished modules Detection of: - Sheet glass defects, e.g., bubbles, inclusions, scratches - Dimensions - Edge defects - Layer defects, homogeneity and thickness of AR-coated glass SolarInspect - Exceptional performance features: - Innovative and modular optical design - Low operating costs - Ready-to-use vision systems optimized for specific process step requirements - Customized solution for all types and sizes of solar modules Nljdpfezdtgijx Aa Isc - Repeatable detection and evaluation - User-friendly quality and analysis tools for production control and process analysis - Easy integration into new and existing lines - Industrially proven design Type: SolarInspect Condition: used Sale is ex works. Scope of delivery: (See image) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, mileage: 22,033 km, power: 206 kW (280.08 HP), first registration: 02/2005, fuel type: diesel, empty load weight: 13,200 kg, maximum load weight: 4,300 kg, overall weight: 17,500 kg, axle configuration: 4x4, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, Equipment: ABS, all wheel drive, cabin, cruise control, * 2x available * Special aerial work platform * 4x4 all-wheel drive with only 22,033 km * Very versatile, e.g. roofing and tree work * as well as cleaning work for solar modules, assembly work for large posters/advertising * Only 817 operating hours * from premium manufacturer Danilift * Cable remote control * As well as control unit in the work basket * 25 m working height * 12.00 m lateral reach * 1,500 liter water tank * Separate water pump with diesel drive * 50 m water hose on hydraulic reel * Water supply to the workman basket * 220V power connection in the workman basket * Storage boxes all around * Hose box * C pipe tank filling * Complete warning and safety equipment - and safety equipment with blue lights and sirens * Working lights * Driver's cab with 3 seats * 8-speed manual gearbox * Differential lock * Cruise control * Reversing camera * Air-sprung comfort seat * Max. gross vehicle weight 17,500 kg. * Unladen weight: 13,200 kg * Wheelbase: 4,500 mm If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Nledpjvhpxyjfx Aa Iec All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 254,892 km, power: 125 kW (169.95 HP), first registration: 08/2016, fuel type: diesel, overall weight: 7,000 kg, next inspection (TÜV): 10/2025, color: green, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 8,600 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, parking heater, * Former butcher's sales vehicle * Counter flap opens electrically * Various refrigeration units * Washbasin * Passage from the cab to the box body * Rear door * Counter * Auxiliary heater * Radio * Central locking * Rear view camera Nodpfxoyxt Ewe Aa Islc * Air conditioning * And much more * Subject to errors, modifications, and prior sale

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Njdpjy Ulziefx Aa Islc -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: EWM, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: HIGH-SPEED integral 4X4S 4-roller drive Nodpfoy Ulu Nsx Aa Ielc -Dimensions: 1370/820/H1500 mm -Weight: 242 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding current: 320 A -Features: Water-cooled, remote control -Wire feeder case: Esab MEK 44 C 4-roller drive Nodpfx Aaey Ulrnj Islc -Dimensions: 1130/640/H1630 mm -Weight: 174 kg

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting Nlodpfxsd I U Dws Aa Iec -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled Nlodpfx Aaox Hi I Do Ijc -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: refurbished (used), functionality: fully functional, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 10 A, welding current (max.): 420 A, For sale: Kemppi Pro Evolution 4200 10-420 AMP (100% 400A) 400 Volt Pulse Nlodpsy Tt T Dofx Aa Iec Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Soft start Hot start Down slope Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, and tested Including 2x PRO5000 Welding torches, earth work cable with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current Nlodjwa Uwdjpfx Aa Iec - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: good (used), approx. 4 pieces h.a.l.m. Solar cell measuring system, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device - second-hand -: Price per unit ex location: 8.350.-€ (net) Complete device IV measuring system Manufacturer: H.A.L.M. Type: cetisPV Consisting of: CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device Year of manufacture: unknown Condition: good Nlsdpfeukiu Nex Aa Iec Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Nodpfxjy Rqh Te Aa Iolc All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2011, condition: used, Designation: Battery Simulator Manufacturer: Kratzer Model: VES2 150KW 600V +/- 600A Nljdpey Nzakjfx Aa Iec Battery Simulator / Vehicle Energy System · Highly dynamic, bidirectional converter for e-mobility component testing in the automotive industry · IGBT technology, water cooling · Grid connection with feedback capability and low grid interference · Galvanic isolation with medium-frequency transformers · Selectable control schemes and user-defined control parameters for adaptation to a wide range of test scenarios · Integrated simulation module for emulation of resistors, batteries, and capacitors · No switching time between source and sink operation · Low noise due to high switching frequency and water cooling Item condition: Used item as shown in the pictures Please contact us if you have any questions Shipping: The specified shipping costs apply to deliveries within Germany Worldwide shipping (please enquire for shipping costs outside Germany) The given shipping costs apply to a shipment within Germany Sale to business customers only, without warranty or guarantee. Technical data deviations and errors in the item description may occur and are subject to change.

Condition: new, Year of construction: 2026, CORMAK CL300 Pulsed Laser Cleaning Machine 300W The CORMAK CL series pulsed laser cleaners are industrial devices designed for fast, precise, and non-contact removal of contaminants from metal, non-metal, and wooden surfaces. Depending on the application requirements, three power variants are available – CL200, CL300, and CL500 – all based on JPT MOPA pulsed fiber laser sources. This ensures high process stability, a wide range of parameter adjustment, and the ability to work both with delicate components and more demanding surfaces. Technical Specifications Parameter Value Dimensions (W × H × D) 260 × 460 × 490 mm Weight 31 kg Laser Source Brand JPT Fiber Interface QCS Operating Mode MOPA Laser Wavelength 1064 nm Maximum Pulse Energy 5 mJ Fiber Cable Length 5 m Laser Pulse Frequency 1–3000 kHz Pulse Duration 13–500 ns Laser Spot Size 7 ± 1 mm Laser Line Length 0.01–150 mm Laser Line Width 0.01–150 mm Process Gas None required Scanning Area (Lens) 130 × 130 mm, F254 Cooling System Air-cooled Scanning Speed 0–30000 mm/s Operating Temperature 10–30°C Operating Humidity < 70% non-condensing Operating Voltage AC 230 V, 50/60 Hz Efficient and Precise Surface Cleaning CORMAK laser cleaning systems effectively remove: rust, paint coatings, varnishes, operational deposits, oxides, oil residues, resins, and other difficult contaminants. Thanks to adjustable pulse energy, frequency, and pulse duration, the cleaning process can be optimized for both: Nledpoy Sgn Sofx Aa Iec precise and selective cleaning of molds, dies, tools, and precision components, and efficient preparation of larger surfaces for further processes such as welding, painting, or bonding. The non-contact nature of laser cleaning minimizes the risk of mechanical damage, microcracks, or deformation of the base material. Advanced JPT MOPA Technology The use of JPT MOPA laser sources provides a wide adjustment range for pulse frequency and pulse width, allowing optimal energy density settings depending on the type of contamination and the base material. The long fiber cable increases working flexibility at greater distances from the main unit, which is especially useful when working on: large structures, production lines, installed machine components, steel constructions, molds, facades, and industrial equipment. All CL series models operate at a wavelength of 1064 nm, ensuring high effectiveness on common industrial materials such as: structural steel, stainless steel, aluminum alloys, and many other technical substrates. Cost-Effective and Environmentally Friendly Operation The CL series devices are air-cooled and do not require process gases or abrasive materials, which: simplifies installation, reduces operating costs, minimizes maintenance requirements, and makes the cleaning process more environmentally friendly. High scanning speeds combined with adjustable beam parameters significantly reduce processing time compared to traditional methods such as: sandblasting, shot blasting, or chemical cleaning, while ensuring repeatable results and a high-quality surface finish after cleaning.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: Ohne, The Solarfold PV Container is an innovative, mobile photovoltaic solution for flexible power generation precisely where energy is needed. The entire solar power plant is housed in a 20-foot high-cube container and can be assembled and commissioned on site in a short time. Nedsytblyepfx Aa Ielc With an installed capacity of up to 130 kWp and a total of 196 PV modules, the Solarfold offers a powerful, scalable solution for temporary or mobile energy supply. The system is fully pre-configured and pre-wired. Thanks to its innovative aluminum rail system and mobile ground anchors, the installation can be set up without complex foundation work or cable trenches. This makes the Solarfold particularly suitable for projects with changing locations. Technical highlights: Rated power: up to 130 kWp PV modules: 196 units Container: 20' HC (High Cube) Transport weight: approx. 13.5 t Module surface area in operation: approx. 6 m × 123 m Integrated inverter Modules fully pre-wired Rapid assembly and disassembly Advantages: Mobile power generation for flexible sites No soil sealing or cable trenches required High energy yields and short payback period Transportable by truck, train, or ship Typical applications: Construction sites and infrastructure projects Agriculture Industry and commerce Events and festivals Charging infrastructure for e-mobility Temporary power supply or off-grid applications The Solarfold enables sustainable, economical, and flexible power production and can be combined with battery storage systems as required by the project.