Used Rafamet Uga 170 for sale (2,986)

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Pgodemidwcopfx Aahsr Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm The minimum distance between the axes of the sets - 1500 mm Maximum axle clamping on the rails - 25 tons Rotation of drive rollers (stepless) - 15-82 rpm Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Sliding rail travel - 9000 mm/min Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Pgjdpfxjyym Saj Aahjr

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pgedpjzvliyofx Aahsr Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: used, Year of construction: 2017, functionality: fully functional, Graule ZS 170 - digital length stop - digital angle display Pgedpezm R U Nefx Aaher - roller conveyor - dust extraction

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Pgjdpfozk H A Dsx Aahjr Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, For sale is a highly efficient, perfectly coordinated recycling combination package from the German market leader WEIMA, consisting of the single-shaft shredder WL 600 and the hydraulic briquetting press C 170. Both machines are of German manufacture (“Made in Germany”) and have operated with absolute reliability. We only used this machine for a short time because the project we had planned, involving deadwood from the natural forest, did not work out. However, this had nothing to do with the machine's functionality. We are sending the machine back to Germany because there is no market for it in Chile. Pgedpfxozgq Tro Aahsr We will add more pictures today of the packaged system, which will begin its journey next week.

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Pgodpfshvml Iex Aahsr Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Pedpfxszv S Ags Aahjgr Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Year of manufacture: 2006 Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg Psdpfezw A Ehex Aahjgr Additional information The machine is equipped with a new screw, which is covered by a warranty.

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Pjdpozv Sy Sefx Aahogr Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34368, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 170 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table length: 3,050 mm, table height: 950 mm, throat depth: 400 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, Equipment: CE marking, safety light barrier, Hydraulic press brake LVD PPEC-5 170/30 Touch Year of manufacture: 2008 Serial number: 34638 Technical specifications Force: 1700kN Working length: 3050mm Distance between uprights: 2600mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Table width: 150mm Approach speed: 100mm/s Working speed: 10mm/s Pjdpfxozl Uchs Aahogr Return speed: 100mm/s Weight: 11000 kg Motor: 15kW COMMAND CONTROL CNC TOUCH LITE CNC 5 axes Y1 Y2 X R V • Table V-axis PP8170 • Reach of X-axis: 600mm • CE marking “PP3580” • Top tool clamping Eurostyle, 15 pcs • Back gauge X-R duo PP8098 • 2 front supports • 2 fingers on back gauge

Condition: good (used), Year of construction: 1980, Please find below the technical specifications for the RAFAMET vertical lathe, Type KCF 250: Pjdpfozlrg Dox Aahegr General information: - Year: 1975 - Overhaul/Retrofit: Approximately 2010 - Table diameter: 2500 mm CNC NUM 1060 Technical capabilities (indicative data for this machine segment): - Table diameter: 2500 - Maximum external machining diameter: 2700 - Maximum turning diameter: ~2800 mm - Maximum workpiece height: ~2200 mm - Table load capacity: Up to ~15,000 kg (15 tons)

Condition: good (used), Year of construction: 2016, machine/vehicle number: TAD174116002, Offer 26235 Technical data: - Working width: 4100 mm Pgedpozu Na Hofx Aahor - Pressing force: 170 t - Distance between columns: 3600 mm - Overhang: 400 mm - Max. installation height: approx. 400 mm - Ram stroke: 225 mm - Working height: approx. 920 mm - Motor power: approx. 18 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 4800 x H 2750 x D 2300 mm - Weight: approx. 12500 kg - Includes: - Swivel arm – control panel with ESA control - For 4 axes Y1 + Y2, X, Z - Motorized back gauge with motorized height adjustment - Crowning - Safety – light curtain - 4-way universal die + split ram tool 4000 mm - Pointed tool 4000 mm - Ram tool 3000 mm - V-die 3000 mm - Electric foot switch - Side-mounted adjustable support arms

Condition: excellent (used), Year of construction: 2009, operating hours: 84,609 h, functionality: fully functional, clamping force: 2,000 kN, plate length: 795 mm, plate height: 795 mm, total length: 6,000 mm, total width: 2,000 mm, overall weight: 10,950 kg, Arburg 570A-2000-800/170 two-component hybrid injection molding machine with sorting flap (247) Category: INJECTION MACHINES Brand: Arburg Number: 247 Availability: in stock Year of production: 2009 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 50//35 Injection weight [g]: 359//105 Injection pressure [bar]: 2000//1470 Closing force [kN]: 2000 Column spacing [mm]: 570 x 570 Plate size [mm]: 795 x 795 Min. mold height [mm]: 400 Control type: Pjdozw Eg Uepfx Aahsgr Selogica Tongue: English, German Working hours [h]: 84609 Weight [kg]: 10,950 Dimensions [mm]: 6000 x 2000 Feed hopper: NO Air valve: 1x

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm Pgodpfx Aeuddcgsahjr 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Year of construction: 2018, condition: like new (used), OTEC Special Purpose Machine SF 170/270/1000 for Camshaft Bearings For sale is an OTEC special purpose machine for the machining and surface finishing of camshaft bearings. The system is suitable for machining both short and long camshaft bearings and has been designed for industrial series applications. Technical data: Manufacturer: OTEC Machine type: SF 170/270/1000 Application: Machining and surface finishing of camshaft bearings Machine dimensions: • Length: approx. 2,586 mm • Width: approx. 798 mm • Height: approx. 1,785 mm • Loading height: approx. 920 mm Pgedezb Abxepfx Aahsr Weight: • Machine weight: approx. 1,200 kg • Transport weight: approx. 1,400 kg Electrical connection data: • Voltage: 3 x 400 V • Frequency: 50/60 Hz • Fuse rating: 32 A • Connected load: 12.5 kVA • Max. power consumption: 10 kW Compressed air connection: • Operating pressure: 6 bar • Connection: DN 7.2 (R 1/4”) Water connections: • Inlet: 3/4” (Ø 16 mm) • Outlet: 1 1/4” (Ø 31 mm) Workpiece dimensions: Long camshaft bearing: • Length: approx. 177.5 mm • Inner diameter: approx. 89 mm Short camshaft bearing: • Length: approx. 89 mm • Inner diameter: approx. 89 mm Special features: • Robust industrial design • Compact footprint • Automated machining process • Suitable for series production • Integrated media connections for compressed air and water Location: Germany Inspection possible by appointment.

Condition: new, Year of construction: 2026, machine/vehicle number: ZS170N mit ES-F3, functionality: fully functional, power: 3 kW (4.08 HP), cutting height (max.): 170 mm, cutting width (max.): 410 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 40 mm, actuation type: manual, total length: 6,400 mm, total width: 1,200 mm, total height: 1,550 mm, table height: 920 mm, Equipment: CE marking, Mobile saw carriage, overall length 6400 mm, with a Graule SZ170N saw mounted on it. Stop roller track with folding stop and scale on the left side, 3100 mm, measuring length on the folding stop 3050 mm + attached extension with stop and scale for a measuring length up to 5000 mm. Feed roller track on the right side, track length 3000 mm. Pedpfx Aezwn T Roahjgr Track width on the left and right sides is 500 mm. Crosscut and miter circular saw ZS170 N, cutting height at 90° is 170 mm, at 45° inclination is 115 mm. Cutting length is 410. Machine can be tilted on both sides using a hand crank, up to 45° to the left and up to 60° to the right. Machine with carbide-tipped circular saw blade for wood, 420x4.0x40 mm, 48 teeth.

Condition: excellent (used), Year of construction: 2015, Miter and crosscut saw with a maximum cutting height of 170 mm sturdy gray cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard, connectable to dust extraction Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees - 90 degrees Machine stand - Main switch with locking mechanism - Infeed roller conveyor Ro-St60, 3 meters, right-hand - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Pgjdpszhx Adefx Aahjr Heavy-duty length stop/roller conveyor mm - Scale on the rear upright, measuring gauge with magnifying glass and stop flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock, 54634 Bitburg - free loading - - immediately available -

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for hygienic thermal processing of buttermilk in dairy plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Material: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves for food applications 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise measurement of liquid food products 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation in process systems 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar Pgsdpfx Asxtvftjahsr PT: 22.9 bar TS: 120 °C Dimensions: 3200 × 550 × 1850 mm High-performance heat exchanger system optimized for buttermilk processing 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm 8. IPBE Control Cabinet (s/s) Purpose: control and supervision of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line with a throughput of up to 25,000 l/h is a complete, integrated system for the thermal processing of dairy products. Use of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale Pgodpfx Aajyz Db Uohjr - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate

Condition: excellent (used), Year of construction: 1986, RAFAMET type KCF 400 Podpfx Aaeytq T Hshjgr Morę information on request

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Pgsdpeztu Dbofx Aahjr Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: good (used), Year of construction: 2016, operating hours: 13,879 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, The machine is in decent condition and is equipped with a 3-position rotary table (3x120°) Year of manufacture: 2016 Operating hours pump: 17,263 Operating hours production: 13,879 Location: Southern Germany Podownfw Depfx Aahsgr Contrary to the specification, the light curtain is not installed, as we operated the system with an enclosed automation (see photos). However, the components of the light curtain are available and will be sold with the unit. The part-specific automation and the feed hopper shown in the photo are not for sale. It is technically possible to convert the system to a 2-position rotary table (2x180°). This could be ordered by the buyer directly from Arburg after purchase. Ex works sale

Condition: ready for operation (used), NIKKEN 5 AX -170 CNC / Rotary Table incl. Controllers -TYPE 5-axis -AX 170 CNC / Rotary Table Pgodpfezqg I Hex Aahsr -The NIKKEN / 5 AX -170 is a compact and robust CNC swivel table for precise drilling and milling operations in 4- and 5-axis machining. -Complete documentation available. -Well-maintained overall condition. Overall dimensions: L x W x H 780x340x280mm Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Pedpfx Aaezmx Nujhogr Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg