Used Ram Punch Gerhard Busch Cl Label Die Cutter for sale (14,105)

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Nedpfxoy Sfbkj Akuswg Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Nwedpfjy Tu Sbox Akuog Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Nsdpfx Asdzqmzokujwg Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Nwedpfxsy Szlxs Akujg Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Nwjdpfx Aoy Syivokusg Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Stroke 20 mm Nwedpfx Aoff Apiekueg

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, TS1600 creasing and die cutter machine is an indispensable piece of post press equipment which is widely used for die cutting, and creasing of adhesive stickers, carrier bags, book covers, packing boxes, greeting cards, desk calendars, corrugated cartons, etc. It can effectively cut the desired material into large numbers of the same shape. Max. die cutting size 1600 mm X 1200 mm Working speed 20±2 pieces/min Nwsdsy Sz S Sspfx Akueg Machine is at our premises, testing on-site is possible.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, BUSCH HL 110 (Pile Lift) Year: 2021 # Max. load: 1000 kg Platform E size: 780 x 1100 mm # Max. stroke: 900 mm In excellent working condition # Location: Krefeld, Germany Nodpfx Aksy Iuabsuowg

Condition: good (used), Busch SE 125 Pile Turner This machine is like new, fully functional, and ready to use. This turner is from the German manufacturer Busch. This is the current model in production. Technical specifications: Format: 1200 x 800 mm Stack height: 1350 mm Load capacity: 1000 kg Nwedpfx Akoy Ehiqsueg Device weight: 850 kg Power supply: 380 V Controlled from a control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Includes documentation.

Year of construction: 2013, condition: good (used), LINK LABEL ISH 330 Cross Cutter → Year of manufacture: 2013 This machine is designed for precise cross-cutting of both printed and unprinted materials and is particularly well-suited for short production runs, variable cut lengths, and processing transparent substrates. Technical Specifications Unwinding System → Integrated unwind unit → Loop control for stable web tension → Roll end sensor included Maximum Roll Diameter → 550 mm Maximum Web Width → 330 mm Cutting Length → Variable, programmable via touch screen → Skip function included → Intermediate cut programmable from 0.10 mm to 50.00 mm Maximum Speed → Up to 500 cuts per minute Drive and Control → Computer-controlled drive system → Touch screen operation Material Handling → Suitable for transparent materials → Suitable for printed and unprinted materials → Optical sensor for register control Delivery System → Delivery conveyor for shingled output → Pulse separation system for reliable product separation Infeed and Web Control → Pneumatic pressure rollers → Web tension control via integrated vacuum system → Vacuum pump included Electrical and Air Requirements Power Supply → 220 V → 10 A Compressed Air → Minimum 6 bar Dimensions and Weight Nwjdpeycv Eysfx Akuog Overall Dimensions (L x W x H) → 1,980 x 900 x 1,038 mm Machine Weight → Approx. 250 kg Why This Machine? The ISH 330 Cross Cutter stands out with its high cutting precision, flexible length programming, and superior web control. Its optical register system and vacuum-controlled web tension ensure reliable, consistent results even at high speeds and when working with challenging substrates such as transparent films. With its compact footprint and intuitive touch screen operation, it is the ideal choice for efficient finishing in modern label production environments.

Year of construction: 1997, condition: excellent (used), Ref: 11107 . 1997 Bobst SP 104 E Excellent condition, ex Swiss print house, only 32,500 hours worked! Now fully cleaned & checked by specialist engineer. Die cutting machine with stripping and blanking. Equipped with: Automatic feeder Double-sheet sensor Central line for quick job change Bobst C.U.B. electronic control system. E. (Bobst Electronic Control Unit) Micrometric adjustment Quick Lock cutting chase 1-4 mm cutting plate Micrometric Adjusting Upper pull-out stripping frames Central pull-out stripping frame Lower pull-out stripping frames Upper and lower stripping hardware Non-stop device Automatic waste removal apron Synchronization device timing the sheet arrival against the front lays Lateral adjustment for suction device Pull guide OOS Chase changer Auto delivery with non stop Specification: Speed: 8000 sheets/h Pressure: 2,5 MN (250 tones) Sheet size: 104 x 74 cm max.40 x 35 cm min., sheet thickness: 0,4 cm, Punching with gripper margin: 104 x 71 cm Punching without gripper margin: 104 x 74 margin adjustable: 9-17 mm Embossing format: 104 x 71 cm Punching line height: 23,8 mm, Height of embossing plate: 6.35 / 7 mm Nwjdpfx Aksy Uyb Rouog Material: Paper from 80/90 g/m², Solid board 250 to 2000 g/m² Corrugated board E and B up to 4 mm.

Condition: ready for operation (used), Available directly from our warehouse in Son; Nwedpfx Akexz Niuousg heavy stamping die with electric coupling, electrical system completely renewed around 2019, original year of manufacture 1973; mechanically completely overhauled in 2015, moving die resurfaced, die and gear pins replaced with new pins with significantly higher mechanical strength than the originals, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this material is extremely wear-resistant with the addition of Pb (lead) for improved performance and good emergency running properties (i.e., no lubrication required), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays for each channel, motorized clamping of the stamping die. Safety bars have been extended and made more robust compared to the original design, 350 tons of pressure.

Condition: excellent (used), Year of construction: 2002, Iberica JRK-105 Automatic Die Cutter Year – 2002 Maximum sheet size: 1050 x 750 mm Njdpfxjy Uwznj Akuswg Minimum sheet size: 400 x 350 mm Cardboard up to 1.5 mm Corrugated board up to 3 mm Clamping capacity: 9-17 mm Maximum speed: 8500 sheets/hour Maximum pressure: 300 t Stripping section Separation section Centerline 1 mm plate Micro-adjustment

Year of construction: 1997, operating hours: 27,000 h, condition: excellent (used), Bobst SP 130-SER in very good condition, available due to business closure. Nwodpfx Asy S A Hwjkujg Max. sheet size: 130 x 92 cm Min. sheet size: 58 x 54 cm Cutting force: 500 tons Speed: 6,500 sheets/hour Operating hours: 27,000 hours For any further inquiries, please contact us via email or WhatsApp.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: Nsdpfx Akey Umkfjuowg – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, Hydraulic cutting machine MINI ATOM SE 8 Pressing force: 8 tons Table dimensions: 600mm x 300mm Hammer dimensions: 300mm Maximum stroke: 90mm Motor power: 0.9kW Weight: 430kg Overall machine dimensions: 600mm x 690mm x 1330mm Two-hand operation for guaranteed work safety Nodpfx Akjy Tw Ncsuowg Simple and intuitive operation Machine in very good technical condition Option for courier delivery to the customer More information: +48 662 448 730

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. 100% original, no modifications. Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Njdpfx Aksy Tu R Reujwg Weight: 2300kg Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market.

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Nodpfx Akjvfx Uleuowg Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Nsdpfx Asx Syvcjkuowg

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Nwjdpey Rumyjfx Akueg Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools Nwodey Rummspfx Akujg – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Nodpfxjy Rumae Akuswg Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: Nodsy Rulvepfx Akuewg – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm Nwjdsy Rulcspfx Akueg MAX. CUTTING PRESSURE: 550 tons

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Diecutter with stripping and blanking station Technical specifications: Paper min. 90 g/m2 Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Nsdpfx Akowgz H Eeujwg Double Action Stripper, Blanking Station, Quick lock stripping frame,