Used Rambaudi Ramspeed H 45 L for sale (87,702)

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, DISTANCE BETWEEN UPRIGHTS: 4000 MM RAM SECTION: 270 X 330 MM TABLE (T-SLOTS): 4500 X 2500 MM SPINDLE SPEED: 24,000 RPM Hsdpfszhn Agox Ab Ajt CNC: FIDIA M 2

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. Hsdpjzmap Nsfx Ab Ajt More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: excellent (used), Year of construction: 2017, Venti Oelde High performance centrifugal fan Manufacturer: Venti Oelde Hodpfswxu Rnex Ab Aet Type: HRV 45-224 / R GL 360 Type: High-performance centrifugal fan V: 2559 m³/h 12 bar t: 300 C p: 0.608 kg/m³ Pw: 0.9 kW nv: 2840 1/min Weight: 180 kg Year of manufacture: 2017 You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Hodpfjvg Iqxjx Ab Ajt Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: used, first registration: 11/2018, Equipment: ABS, Operating hours: 2,586 h (diesel), 589 h (mains) Customs sealing device with approval and certification Underrun protection, bolted according to RL 70/221/EWG? Color: White FERROPLAST body in reinforced design, suitable for intensive cooling operation All three axles with lifting function and starting assistance (?3x brakes?) Special design of the support wind deflector console for 3-axle tractors Pallet box for 36 Euro/ISO pallets Dynamic Ramp Protection (DRP) Additional pair of mudguards between the axles (plastic) TrailerConnect service package – “Temperature” (12 months included) Lighting system with 2 LED combination lights + safety lights SL2 4 temperature sensors for temperature recording Right-hand fuel filler neck + fuel tank suitable for biodiesel Level indicator -40°C to +40°C, accuracy class 2 according to DIN 16203 Rear floor plate with 1,000 mm stop inside Cooling unit: Carrier 1950 MT Hedezr A Rtopfx Ab Ast

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Hjdpfjyhhqxex Ab Ajt Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including 10-head multihead weighing unit (2.5 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml; film width: max. 620mm; bag size (mm): min.-max. L(80-400)xW(180-300); max. speed of the machine in neutral: 45 cycles/min; stainless steel 304; 220V, 5kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; machine weight: 700kg. The weighing unit is equipped with 10 weighing heads (2.5l/head) for high weight accuracy and also controlled with PLC (via touchscreen, also in different languages available). 99 programs can be preset, step motor can be set according to different products. - Specification: Hopper capacity: 2.5l; weighing range: 10~3000g; accuracy: ±0.1~2g (depending on product); max. speed of the machine in neutral: 60 cycles/min; stainless steel 304; 220V, 1.5kW; dimensions of the weighing unit LxWxH: approx. 1600x1136x1484mm; machine weight: 500kg. - Specifications of the Z conveyor (automatic transport of the material to the weighing unit): Dimensions depending on customer needs (normal height 3.6m); conveying capacity: 3-6m³/h; 380V, 0.75kW; gross weight 500kg. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Rotary table to collect finished bags from outfeed conveyor. Speed is adjustable. Diameter of table: 1200mm (standard); stainless steel 304; 220V, 0.37kW. Stainless steel platform, required to get access to the weighing unit and upper part of packaging machine, dimensions LxWxH: approx. 2x2x2m. Total dimensions of complete system approximately L3200xW3200xH3600mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. Hsdsv Nmi Eepfx Ab Ajt

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Hsdpfsrbqtnsx Ab Aot Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, mileage: 474,013 km, first registration: 06/2008, total length: 6,950 mm, total width: 2,450 mm, total height: 2,310 mm, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, power assisted steering, = Additional Options and Accessories = - Refrigerator = Notes = DAF LF 45 220 L refrigerated truck with STS TK box body and Thermoking TS 500 e refrigeration unit, 6-cylinder engine, 220 HP! 12-tonner Air conditioning Cruise control Engine brake 6-speed manual transmission Multifunction steering wheel VDO radio/CD player Rear axle air suspension Tire size: 245/70 R17.5 Tire tread approx. 8-10 mm Unladen weight: 6,990 kg Payload: 5,000 kg! Wheelbase: 4,900 mm Bodywork: STS refrigerated box Internal dimensions: 6,950 x 2,450 x 2,310 mm (L x W x H) Thermoking TS 500e refrigeration unit (Diesel / Electric - 380 V) BÄR tail lift / standing type BC 1500S2-K2 - German truck! - Very well-maintained condition! - High payload! - TÜV (roadworthiness certificate), emission test, and safety inspection available on request for an additional charge Hedpfxswmn N Ts Ab Aet Subject to errors and prior sale = Further Information = Engine displacement: 6,700 cc Damage: none

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Hjdpswk Nldefx Ab Aet

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Hodpfx Aoyr H A Ijb Ajt Inspection and demonstration possible by appointment.

Condition: ready for operation (used), Shot blasting system MHG SMG 45 K (negative pressure booth) -Work area: 1100x660x700 mm -Integrated dust extraction system Hodpjztrk Ejfx Ab Ajt -Two side doors / dust-tight sealing -System with double walls, sound-insulated and foam-filled -Blasting gun with nozzle -Operating pressure: 3 - 7 bar -On/off switch for lighting and dust extraction -Pressure regulator - Manometer - Foot switch -Viewing window -Documentation Dimensions: L x W x H 1.5 x 1.6 x 1.8 meters / Weight: 380 kg Subject to errors and omissions.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,228 h, load capacity: 4,500 kg, lifting height: 4,150 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,920 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, drive type: Treibgas, opening width: 1,400 mm, LPG Forklift Truck Load Centre: 500 Fork Width: 130 mm Fork Thickness: 60 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Standard Transmission: Double Pedal Speed Class: 20 Condition: Refurbished, without warranty Technical Condition: Good Front Tyres Type: Non-marking Front Tyres Size: 300-15 Continental Front Tyres Condition: 80 - 100% Rear Tyres Type: Non-marking Rear Tyres Size: 250-15 Continental Rear Tyres Condition: 80 - 100% Description: Handover includes new FEM 4.004 inspection with inspection booklet. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Please also visit our website at fleischmann-foerdertechnik. Leasing & financing as well as delivery at favourable conditions are available on request. Trade-in of Linde trucks is also possible—even if you do not purchase a truck from us. The specified operating hours were read off at the time the listing was created. Subject to prior sale, modifications, and errors. Sideshift, Fork Positioner, Integrated Kaup Fork Positioner with separate sideshift 3rd Valve, 4th Valve, Rear Work Light, Front Work Light, Heater, Full Cabin, Air Conditioning, Non-marking Tyres, Seat Heating, Hedpsyq Tw Njfx Ab Aot Double Bottle Holder, Comfort Fabric Seat, Air-suspended, Seat Heating

Condition: refurbished (used), The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant: - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients. - Capacity: With a processing capability of 1000 liters per hour, it's suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly. - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently. - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the reliability of the pasteurization process. - Safety Features: Look for built-in safety systems that can prevent overheating or pressure build-ups, ensuring safe operation. - Efficiency: The design often focuses on energy efficiency to reduce operational costs associated with heating. Divert Valve: Included Construction: Fully stainless steel skid amd stainless steel parts for the product Chart Recorder: Digital with Latest upgrade and test report in 2025 Balance Tank: Included Product Pump: Included Hot Water Pump: Included Heating: Self Heating with Built in Electric Elements Temperatures: Temperatures : 4-45-55-65-78(72) and out at 4 c Connection for Separator in line connection to Homogeniser Hjdpfoxzxwhox Ab Ast Capacity: 500-1,200 L/h Available: Immediately

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants Hjdpfeiuznusx Ab Ast - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: new, Involute gear cutters for SYNCHROFLEX timing belts: Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T16-25 Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T26-50 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T18-28 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T29-89 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T12-20 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T46-80 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T13-17 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T18-25 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T26-40 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T46-114 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T15-20 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T10-14 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T21-R Hsdpfx Aozvrupjb Ast Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T11-16 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T80-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T18-R Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T90-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T90-R Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T10-23 Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T24-R Involute gear cutters for SYNCHROFLEX timing belts: XL 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: L 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T14-19 Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T20-R Inv

Condition: used, Year of construction: 2021, offer consists of: TRANSPAK Helios power tool H-45L-12 - strap width: 12mm - max. tension force: up to 250kg - strap thickness Hedpfju Sr Iiox Ab Ajt PP:0,55 - 1,05mm PET: 0,5 - 1,05mm - weight (incl. battery): 4,26kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer for sale a high-quality UNTHA LR 1000 industrial wood shredder, in almost new condition, having been used only for approximately 1 hour of testing operation. This machine is a reliable and efficient solution for processing wood waste such as offcuts and solid wood materials, delivering consistent output size and excellent performance. Hjdpfx Aszgr Htjb Ast Key Features & Benefits Condition: Practically new – only test run (~1 hour) Brand: UNTHA (Austria – premium shredding technology) Model: LR 1000 Robust industrial design for long-term operation High throughput capacity: approx. 600–700 kg/h (beech offcuts) Uniform output size: approx. 40 mm (30 mm screen installed) Ideal for woodworking companies, carpentry shops, and recycling operations Technical Specifications Material Input Max. input size: approx. 600 × 120 × 55 mm Feed system: tipping box approx. 1.0 m³ Moisture content: < 11% Metal content: not allowed Machine Performance Main drive: 2 × 18.5 kW Hydraulic power: 1.1 kW Rotor speed: 98 rpm Throughput: approx. 600–700 kg/h Cutting System Rotor diameter: 300 mm Number of knives: 27 pcs Cutting system: UNTHA cutter system Screen size: 30 mm Electrical & Control Voltage: 400 V / 50 Hz Control system: Siemens SIMATIC S7-1200 (CPU 1214) Dimensions & Weight Machine dimensions: approx. 1,704 × 1,863 × 1,630 mm Infeed opening: 1,000 × 1,050 mm Total weight: approx. 2,400 kg Included Equipment 45° machine configuration (improved feeding of bulky material) Horizontal discharge screw conveyor (closed design) Full bin indicator with automatic stop Machine support legs (~100 mm) External interface contact

Condition: like new (used), Spare parts for Lisec frame bending system type: BSV-45, Length: 2040mm, Hedsualqkspfx Ab Aet Width: 65mm, Height: 22mm, Weight: approx. 20Kg,

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Hodpfsuqfa Iex Ab Ast Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: new, Year of construction: 2025, Linear weigher ideal for weighing seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 4.5 L; weighing range: 20-1000g; accuracy: +/- 1.5-5g; max. speed of the machine in neutral: 15 cycles/minute; power: 220V, 5A, 0.7kW. Hjdpfjv Nmwvsx Ab Aot Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 4.5 L; weighing range: 50-3000g; accuracy: +/- 2-5g; max. speed of the machine in neutral: 30 cycles/minute; power: 220V, 6A, 1.2kW. Hjdpjv Nmw Aefx Ab Ajt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Hjdovz U Erepfx Ab Aet Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 8,121 h, load capacity: 4,500 kg, lifting height: 6,015 mm, free lift: 2,114 mm, fuel type: diesel, mast type: triplex, construction height: 2,926 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Hsdpezf Sakofx Ab Aet Transmission: Hydrostatic / 2-pedal Speed class: 20 Condition: Refurbished, no warranty Technical condition: good Front tire type: Superelastic Front tire size: 300-15 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 250-15 Rear tire condition: 40 - 60% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing & financing options. We will be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible – even without purchasing a device from us. The stated operating hours were recorded as of the date of listing. Subject to prior sale, changes, and errors. Fork carriage, side shifter, integrated side shifter 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, STVZO compliant (German Road Traffic Licensing Regulations), full cabin, safety light, LED.

Condition: used, Year of construction: 1998, machine/vehicle number: PX15, Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and CO₂ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Hsdev Ai Hyspfx Ab Ajt Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects CO₂ and ensures complete homogenization. Storage tank stabilizes the mixed product before filling. Sanitizing transfer pump moves the sanitizing solution efficiently. Control panel houses all operational and monitoring controls. Work Cycle of the Used Premix PARMATEC Drinkmix The Used Premix PARMATEC Drinkmix 12000 l/h follows a structured four-step process that ensures accurate proportioning and thorough mixing of ingredients. DeaerationFirst, the system removes oxygen from the water to facilitate carbonation. It does this by injecting a precise amount of CO₂ before the water enters the main tank. Additionally, a specially designed nozzle creates a “rain effect” that enhances oxygen separation. As a result, the system achieves optimal preparation for the next stage. DosingNext, the deaerated water and syrup pass through micrometric valves that regulate their flow with exceptional accuracy. Moreover, the machine displays these flow rates on dedicated graduated indicators, allowing operators to monitor the process in real time. This phase ensures that the final premix meets the beverage’s exact specifications. Final Carbonation and MixingAt this stage, the system injects carbon dioxide in the first section of the heat exchanger coil. Then, a micrometric valve controls the amount of CO₂ while a flow meter displays the exac...