Used Rapid Grinder for sale (4,768)

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar Ledpfxozln D Es Amtorp EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Lrjdszlnxispfx Amtep Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology Lodpfxezn Iqko Amtjrp -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Year of construction: 2007, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-SOLO -Drive motor: 2.2 kW -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg Ljdjzn H Syspfx Amtsrp

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order Ledpfxowwkk Is Amtsrp

Condition: ready for operation (used), Year of construction: 1999, Engine: 7.5 kW Warranty: 6 months Lrjdpjzab Tdefx Amtop

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Lrodpsuw Skhofx Amtep Adapted for liquid cooling ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Price for buying both machines: €11,900

Year of construction: 1989, condition: excellent (used), functionality: fully functional, Manufacturer: RAPID Lredsxz D R Topfx Amtsp Type: GK 4535-KU Dimensions of the rotor/grinding chamber: 450 x 350 mm Number of rotor blades: 3 Number of stator blades: 2 Power of the drive motor: 18.5 kW The technical condition is very good!!! Equipment: Plastic discharge chute + silo PRICE REDUCTION FROM 6500 TO 5950 EUR!!!

Condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm Lsdpfxeyvpm Sj Amtsrp -Miter cut: up to 45° -Dimensions 850/850/H1310 mm -Weight: 176 kg

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Lredpfx Aogzc Iysmtep -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 Lodpfx Amji I Hc Astorp -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm Lrjdpfxsm Sk H Io Amtsp -Weight: 162 kg

Condition: good (used), Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm Ledpfx Asb A Hlajmtjrp

Condition: good (used), Notching milling machine Ledpfx Amsb A H Hfjtorp -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Condition: good (used), Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm Lrodoi Dyv Nspfx Amtep -Weight: 76 kg

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm Lrjdowg Axvepfx Amtop -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height: 70 mm (max. ca. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° Lredpfx Amsm Sk Hystjp -Chip extraction: with gate valve for connection to a central extraction system -Dimensions 1020/850/H1300 mm -Weight: 188 kg

Condition: good (used), gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor with brake -Type: DSFG-12/30-0511 .208.60-N-B3 -Gearbox: Type 12 -Speed: 74/8 rpm Lrjdpfxovv Siko Amtjp -Power: 1.1 kW -Design: B3 -Shaft: Ø 30 x 60 mm -Protection class: IP 44 -Brake: 96 V 0.48 A -Dimensions: 680/250/H245 mm -Weight: 43 kg

Year of construction: 1995, condition: used, fuel type: electric, Tiller head, control panel, control unit, steering, steering unit -Manufacturer: Rapid, control panel steering completely from electric stacker RVT 2500 -Number: 1x drawbar available Lredpfxji Dywfs Amtjp -Price per piece -Dimensions: 720/420/H180 mm -Weight: 14 kg/pc.

Condition: used, Electric motor, three-phase motor -Manufacturer: Himmel, electric motor from saw-drill / milling machine Rapid DGL / BFA -Type: 2 HR 80 -Power: 1.3 kW -Speed: 2820 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 Lsdpfx Amegzwxzoterp -Protection class: IP 54 -Dimensions: 270/200 / H250 mm -Weight: 11 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor from automatic saw, drill and mill Rapid DGL / BFA Lrsdpfogzwx Tox Amtsp -Type: DSG-012 / 20-0410.208.40 - K1 - B5 -Gearbox: Type 012 i = 6.98 -Speed: 380/40 rpm -Power: 0.75 kW -Construction: B14 Hole circle: O 100 mm (O10 mm) - Shaft: O 20 x 40 mm -Protection class: IP 44 -Brake: 24 V 1.3 A. -Dimensions: 515/230 / H170 mm -Weight: 22 kg

Condition: used, Year of construction: 2024, Cutting length: 3700 mm Drive: 2 x 3.0 kW motor 2 saw blades, diameter 600 mm / Z = 138 New saw feed: hydropneumatically prepared for installation of an electronic control system Aggregate on the left is fixed, on the right is movable R700i database for max. 400 basic profiles, 1000 color profiles USB and network connection / remote maintenance Cutting angle: 20° - 90° - 135° Integrated memory TFT color touchscreen Aggregate adjustment: stepless motorized aggregate adjustment 20° - 135° including section clamp (1x per aggregate) Indication of swivel range: swivels outwards Clamping device: vertical clamping device with mounting plate for holding profile-related parts Feed from the right: movable roller conveyor, support length 2900 mm, width 250 mm Stops: socket Extraction Software stop for overlengths Stop for short parts, pneumatically extendable Ledpfx Aszhpbdsmterp Label printer: RAPID-specific label printer RED-300, installed in the control panel R700 sealing clamping device Control cabinet, freestanding R700 waste conveyor Cutting length 3.7 m Inclined conveyor 1000 mm horizontal x 2500 mm vertical Storage location: customer

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Ljdpfeuhznbjx Amterp Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Very good condition. Available immediately. Ledpfx Amjd N Rb Detsrp

Year of construction: 2023, condition: new, functionality: fully functional, Description Double mitre saw RAPID DGL 200 M Working length: 5,100 mm Working height: 160 mm Can be swiveled: yes Aluminum spraying device available Short dimension stop available Socket for external extraction available Vertical clamping device available Roller conveyor traveling (feed on the right) Rapid DGL 200 M double mitre saw ----- with saw blade diameter 500 mm, manual length adjustment with digital length display digital length display, pneumatic angle adjustment 45° and 90°, Simple operation and top quality ----- For precise and low-burr cutting of aluminum, plastic and wooden profiles. Lredpfetdgitjx Amtop System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely stable machine bed - Complete grip of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- Perfect dimensional and angular accuracy guaranteed. ----- To achieve this, we use precise and efficient movement technology: Ball bushing guides for length adjustment, spring suspension of the swivel units for convenient and safe angle adjustment between 45° and 90°. The length and angle of this two-head mitre saw are adjusted manually. Greater ease of use and increased performance can be achieved with the aid of a digital length display and pneumatic swivel device. A wide range of profile systems can be processed with 500 mm saw blades. can be processed. Technical data ----- Drive: 2 x 2.2kW three-phase 400 volt motors Swivel range: manual 45° to 90 Saw blade: 500 mm diameter Cutting lengths: 5,100 mm, Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Air pressure: 7 bar Dimensions: 5250/1420/1900mm weight: 1.260kg