Used Raute C2000 - 2615 - 1R70003 for sale (84)

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW Isdpevnri Iefx Anwjau 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: ready for operation (used), Complete Veneer production line. Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Iaodpfxjtryf Is Anwou Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: 16000654/H167942, System for automatic stacking of rotary cut veneers, e.g. directly from a veneer dryer / stacker for rotary cut veneers, automatic stacking device, e.g. for installation/application after a veneer dryer. Speed: 240 m/min. Frequency: 400V 24V 50Hz. Weight: 2950kg. Iodpfxjwya Sme Anweau

Condition: good (used), 2 RAUTE rotary cutters year 2019 Iodpfeul Txnex Anweau Length: 3300 mm 3-knife blade holder

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5-axis CNC machining center for processing carbon and fiberglass parts, plastics, Ureol, and wood. Availability: approximately 4 weeks. Machine details: CMS ANTARES 2615 - Axis travels: X-axis: 2,600 mm Y-axis: 1,500 mm Z-axis: 1,200 mm B-axis: +/- 120° C-axis: +/- 270° - Universal tool head (15 kW | max. speed: 24,000 rpm) - Tool magazine: linear magazine with 8 stations, moving in the X-direction - Tool holder: HSK 63F - Minimum quantity lubrication - Machine table with aluminum plate and T-slots - CNC control: Fanuc 31 IB5 - Vacuum system: 1 x 100 m³/h - Chip trays, round axis measuring unit, dust protection, ... Additional services: Installation, commissioning, and training available! Iedpfx Ajzavtrenwsau

Condition: new, empty load weight: 235 kg, maximum load weight: 515 kg, overall weight: 750 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, loading space volume: 0.8 m³, color: black, construction height: 780 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, lowerable cargo bed / 750 kg axle, * IMMEDIATELY AVAILABLE * incl. lowerable cargo bed / 750 kg axle Technical data: - Type: New vehicle - TÜV: New/3 years - Availability: IMMEDIATELY! - Gross vehicle weight: 750 kg - Unladen weight: 235 kg - Payload: 515 kg - Interior dimensions: 260 x 155 x 15 cm (L x W x H) - Overall exterior dimensions: 403 x 205 x 78 cm (L x W x H) - Loading sill height: 31 cm - Tires: 175/70R13 steel rim - Brake: No - Support wheel: yes, automatic - 100 km/h: yes - Incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: Multiplex wooden floor 18mm - Side walls: Steel profile powder-coated black - Side wall height: 15cm - Chassis: Low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: none - Drive-on angle: approx. 13 - Wheel stopper: none - Overrun device & brake: - - Frame/chassis: Welded hot-dip galvanized steel frame - Lashing eyes: 8 pieces foldable - Winch: at extra charge - Supports: Supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - 3-sided body made of sturdy galvanized steel profile and powder-coated in black-grey (RAL 7021) - Continuous drive-on wedge enables drive-on across the entire width of the loading area - Insertion options at all corners, e.g. for tarpaulin frame - Folding number plate Foldable license plate holder - Sturdy plastic mudguards: - 8 fold-down lashing eyes in the side wall profile - 1 lashing eye in the bulkhead profile - 1 lashing ring in the middle of the rear loading area - Reinforced, automatic support wheel for safe parking of the loaded trailer - Made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Drive-on angle when tipped approx. 13 for AS 826 - Rear license plate holder, can be swiveled away for loading - Automatic reverse drive - 13-pin plug - Reversing light - Large reversing light plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - anti-theft device - spare wheel - storage box - high tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Isdpfxsu Htpds Anweau

Condition: new, empty load weight: 370 kg, maximum load weight: 1,030 kg, overall weight: 1,400 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, loading space volume: 0.8 m³, color: silver, construction height: 780 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, lowerable loading area / 1400 kg axle / Including 100km/h, * IMMEDIATELY AVAILABLE * incl. lowerable loading area / 1400 kg axle / Including 100km/h Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1400 kg - Unladen weight: 370 kg - Payload: 1,030 kg - Interior dimensions: 260 x 155 x 15 cm (L x W x H) - Overall exterior dimensions: 403 x 205 x 78 cm (LxWxH) - Loading sill height: 46 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Multiplex wooden floor 18mm - Side walls: Steel profile powder-coated black - Side wall height: 15cm - Chassis: Low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: Hand pump - Drive-on angle: approx. 6 - Wheel stopper: without - Overrun device & brake: ALKO - Frame/chassis: Welded hot-dip galvanized steel frame - Lashing eyes: 8 pieces foldable - Winch: at extra charge - Supports: Supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - 3-sided body made of sturdy galvanized steel profile and powder-coated in black-grey (RAL 7021) - Continuous drive-on wedge enables drive-on across the entire width of the loading area - Wheel shock absorber + 100 km/h approval - Insertion options at all corners for e.g. tarpaulin frame - Folding number plate Foldable license plate holder - Sturdy plastic mudguards - 8 fold-down lashing eyes in the side wall profile - 1 lashing eye in the bulkhead profile - 1 lashing ring in the middle of the rear loading area - Reinforced, automatic support wheel for safe parking of the loaded trailer - Made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Drive-on angle in tilted state approx. 6 - Hand pump with hydraulic lowering device and lowering lock - Rear license plate holder, can be swiveled away for loading - Automatic reverse drive - 13-pin plug - Reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - anti-theft device - spare wheel - storage box - high tarpaulin - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Iaedpfx Aou Hrwgsnweu

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 14 pieces -Tool angle: 25° Iedpfxogwdp As Anweau -Drawing: in the photos -Dimension: 25 x 158 mm -Length total: 2615 mm (lengths see parts list photo) -Weight: 47.3 kg

Condition: new, functionality: fully functional, empty load weight: 1,300 kg, maximum load weight: 2,200 kg, overall weight: 3,500 kg, loading space length: 5,500 mm, loading space width: 2,270 mm, loading space height: 2,080 mm, PRODUCT INFORMATION "CHEVAL LIBERTE ROADSTAR C2000 3500KG 550X227X208CM CAR TRAILER BOX TRAILER" The C2000 car trailer box trailer from Cheval Liberte / Debon combines large volume, an attractive design, an aerodynamic front, aluminum sides, an aluminum floor, and a polyester roof. Hardly any other car box trailer has such excellent handling as this one! The box trailer is equipped with the Pullman2 chassis, a proprietary ChevalLiberte development. A low loading height of just 38 cm, independent suspension with trailing arms, coil springs, and automotive-standard shock absorbers ensure optimal handling. The flat loading angle is ideal for loading a car. A loading ramp with additional loading rails and a particularly low chassis allow for loading even low-lying vehicles. The extensive standard equipment on the car trailer includes a poly roof with a one-piece poly front, aluminum walls, aluminum floor, two side doors, two side flaps, an electric cable winch, perforated support rails and wheel stops at the front, a 100 km/h speed limiter, interior light, aluminum rims, a spare wheel with aluminum rim, an automatic jockey wheel, tie-down eyes, a sturdy frame, and a V-drawbar. Dimensions: Loading width approx.: 220 cm, loading height approx.: 189 cm, loading width between the fenders (narrowest point) approx.: 215 cm, height from the perforated rail to the sales hatch approx.: 18 cm, the curve at the front is approx. 50 cm deep, thus the straight interior length is approx. 500 cm. Interior length to the cable winch approx.: 520 cm. We offer affordable accessories for box trailers, such as motorcycle rockers, support rails, motorcycle straps, tie-down rails, tie-down straps, rear supports, and tie-down eyes. The body is splash-proof. ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs Iaedpfxewa Scdo Anweu · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: used, Year of construction: 2022, Linearly aligned can filler with rinser, filler, lid depositor and seamer in one block. Counter-pressure filling is controlled volumetrically. Format changeover for all standard can sizes. Capacity: 2000 cans/h for carbonated drinks Max. oxygen pickup on the filler: 25 ppb Compressed air: IG 1/2", 6-10 bar Iasdpfoxbn Icsx Anwou Length: 2774 mm Width: 1100 mm Height: 2000 mm Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible Operation / Control: Siemens Simatic S7 Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Iajdetwqzrjpfx Anwou

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm FLANGE : Width 150 -1000mm Thickness 8-40mm Isdpfx Ajzc Rl Uonwoau Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem.

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. Iodpozd Uh Iefx Anwjau GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. Iedpfoza Azvex Anwoau 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, GMN - Schaudt TSE 180c-20000/59 spindle 377792 - 1053638, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iedpfx Aonkqzijnwjau

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8512615, unused, 100% functional, scope of delivery as per photos Iajdpfx Anjx Eur Sjweu

Condition: used, first registration: 01/2002, color: silver, Year of construction: 2002, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: tail-lift, Vehicle location: Bovenden, aluminium tail lift, upright Body: 2t tail lift BÄR BC2000S4 ex-Bundeswehr! Dimensions: approx. 1,760 mm x 2,500 mm ACCESSORY INFORMATION WITHOUT WARRANTY, SUBJECT TO CHANGES, INTERIM SALE AND ERRORS RESERVATION! Iajdpfemn Sdfox Anwju

Condition: used, first registration: 01/2014, color: silver, Year of construction: 2014, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: tail-lift, Vehicle location: Bovenden, tail lift aluminum, upright Body: MBB C 2000 S. 2t tail lift, ALU. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Iasdpfeuf Slfox Anweu

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Iasdpfx Anozc N Twewju Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 Iaedpfxozb Igte Anwsu - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: excellent (used), Year of construction: 2015, operating hours: 29,500 h, functionality: fully functional, machine/vehicle number: 231000, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 2,000 bar, injection weight: 434 g, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines from the current model year 2010 onwards. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. Manufacturer: Arburg Type: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Operational status: fully functional Condition: very well maintained - German origin - from first owner Extras: 2 x core pull units Thermoplastic cylinder, complete, 55 mm, highly wear-resistant Thermoplastic processing Open nozzle 55mm Clamping plate set 570 central 125 mm Selection unit - extended graphics - extended tool protection - extended travel movements - extended clamping - production control - job change Complete documentation - electrical diagrams, etc. Injection unit Screw diameter: 55 mm Injection weight: 434 gr./PS Injection pressure: 1650 bar Injection volume: 474 ccm Clamping unit Clamping force: 200 tons / 2000 kN Tie bar distance: 570 x 570 mm Clamping plates: 795 x 795 mm Tool installation height: 300 mm Max. distance between plates: 950 mm Opening stroke: 650 mm Iaodpfx Anow Tt R Iewou Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connection value: 45 kW Visible peripheral devices are not included in the scope of delivery. The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's premises against reimbursement of freight costs - worldwide delivery possible Available from our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell our own machines purchased from ongoing production from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not an intermediary dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse.

Year of construction: 2015, condition: used, Dimensions (LxW): 160 x 240 cm Iajdpfjy Tyb Uox Anweu CO2 emission: 0 g/km Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 1984, VTL Titan SC 2000 Ijdpfx Aoruncdenwsau Chuck diameter 2000 mm Max. turning diameter 2150 mm Max. work piece height 1600 mm Max. work piece weight 15000 kg Main motor power 55 kw Movie with machine underpower available Weigth of machines aprox 31.5 to

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Cummins KTA50-G23, General information Field of application: Construction Weights Empty weight: 16.583 kg Functional Generator capacity: 2.000 kVA Dimensions of cargo space: 602 x 259 x 333 cm CE mark: yes Other information Fuel consumption: 308 Liter / Hour at 75% Load Generator: Stamford S7L1D-G4 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Iajdpfx Asyzwnujnweu - Control Panel

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer Isdpfx Anjy Sat Uewjau - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post