Used Ready To Work for sale (62,978)

Condition: used, Year of construction: 2010, Loading silo for asphalt mixes 270 tons with bucket conveyor - separate loading silo for various asphalt mixes - capacity: 270 tons Fjdpfxjv H R Tpj Ad Njpg - with bucket conveyor and bucket - can be attached to any existing system - control system

Condition: ready for operation (used), proper working ra hydraulic rear view camera. Fodpfx Aoy A Dt Hjd Njpg

Condition: new, Year of construction: 2024, machine/vehicle number: 5182024016, Our ZIM 518 machine is an entry-level and investor-friendly machine designed for the production of double-layer paving stones. ZIM 518 comes out with low energy consumption, low investment cost and high return on investment. Fpsdpfx Adeicap Tj Nog Our machine, which can produce 5 concrete blocks or 18 concrete paverstones in one press, is designed to produce 1000 pallets per day. However, if requested, it can also produce concrete curbstones of 1 meter length! To facilitate this production and increase quality; It has many features such as driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. Our machine is designed as manual system and it is managed by the operator with a hydraulic unit and a joystick. Although it is a budget-friendly machine and can be installed within hours, our ZIM 518 machine enables the production of high quality paving stones. Our machine gives you a good position in the competition! We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service.

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 9 drawers – large format, approximately 117 x 104 cm inside the drawer Fpedsy Ehkbopfx Ad Neg – each drawer has its own bearing. Made in Germany

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS Fodpethg Disfx Ad Njpg ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: excellent (used), Year of construction: 2007, Hangcha forklift CPCD 80-RW14, 8 ton lifting capacity, with side shifter and automatic fork adjustment. Very good condition, technically perfect, from second owner. Original operating hours only 1170, year of manufacture 2007. 6-cylinder Isuzu engine, dry and flawless. Engine starts immediately, even at minus 10 degrees Celsius. New service, new rear tires. Lifting height 4m, overall height 3.2m, fork length 1.8m; including fork extensions to 2.8m. Lighting, indicators, etc. With cabin, air conditioning, heating – everything works. Own weight 11,490 kg. Fpsdpfx Adoyk Hwvs Neg

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, load capacity: 8,000 kg, Hangcha forklift CPCD 80-RW14, 8-ton lifting capacity, side shifter, automatic fork adjustment. Very good condition, technically flawless, from second owner. Only 1,170 original operating hours, year of manufacture 2007. 6-cylinder Isuzu engine, dry and in perfect condition. Engine starts immediately, even at minus 10 degrees. Newly serviced, new rear tires. Lifting height 4 m, overall height 3.2 m, fork length 1.8 m, including 2.8 m fork extensions. Lighting, indicators, etc. With cabin, air conditioning, heating – everything works. Own weight 11,490 kg. Fpjdeylh Hzepfx Ad Nsg

Condition: good (used), functionality: fully functional, load capacity: 10,000 kg, Welding positioner 10 tons, height-adjustable Fpedpfxoy Hl Ele Ad Nsg Height horizontal min. 1.3 m plus approx. 0.6 m Height tilted min. 1.0 m plus approx. 0.6 m Length 2.5 m Width 1.8 m Clamping plate diameter approx. 1.9 m with remote control Speed steplessly adjustable

Condition: good (used), functionality: fully functional, load capacity: 3,000 kg, Equipment: foot remote control, Sideros Rotolift with 3000 kg load capacity Technically sound, operates flawlessly Dimensions: Horizontal height min. 0.72 m, horizontal height max. 1.59 m Vertical height min. 0.74 m, vertical height max. 1.54 m Length 2.5 m, width 1.0 m Fpodpfx Adey Hl A Re Njg Diameter 1.25 m

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, in stock, 12-month warranty, not a solvent oven! - Max. temperature: 250°C - Total steam volume: 20.5 m³ - Usable dimensions (LxWxH): 2300 x 2750 x 2200 mm - Control system: Jumo Imago 500 - Heating capacity: 36 kW Fpjdpfx Adottbf Uo Nog - Max. load for the oven cart: 6000 kg, electrically driven - Electric supply and exhaust air dampers: Belimo - Exhaust fan controlled via frequency converter - Installation dimensions (LxWxH): 3000 x 3000 x 3125 mm plus rails in front of the oven - Own weight approx. 3,500 kg - Free-standing control cabinet - Documentation included - Electrically tested and supplied with a current DGUV measurement protocol Inspection at our warehouse by appointment. Car bottom furnace, oven, ovens, industrial furnace, convection oven, chamber convection oven, tempering furnace, heat treatment furnace, drying oven, annealing oven, chamber oven, drying cabinet, hardening oven,

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, borehole diameter: 28 mm Includes wireless remote control Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW Fpodpfx Adjx Thyrs Nog We offer tables in various sizes and load capacities: - Load capacity 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic

Condition: new, Year of construction: 2025, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Fpedpfxex Thvyo Ad Nsg Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 1,500 kg, load center: 600 mm, fuel type: electric, battery capacity: 40 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, fork length: 1,150 mm, tire condition: 100 %, empty load weight: 145 kg, total length: 380 mm, drive type: Elektro, construction width: 540 mm, Low lift pallet truck Load centre: 600 mm Condition: As new Technical condition: Very good Front tyres type: Vulkollan Front tyres condition: New Rear tyres type: Vulkollan Fodpfxoyb Upno Ad Nepg Rear tyres condition: New Battery voltage: 24V Battery capacity: 40Ah Battery year of manufacture: 2025 Battery condition: New Description: New equipment – inspected according to FEM 4.004 (UVV). NEW – checked. Pulse control

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Fpodpfx Aeq Ulh Hod Nog Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Fpjdpswak U Ejfx Ad Nog Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER Fpsdpfx Ajttlfksd Nsg ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, 2 identical DEMAG hoists P425 H11, Load capacity: 10 tonnes Lifting speed: 5.5 m/min Fpodpfx Aowaflfod Neg Fine lifting speed: 0.5 m/min From a large spare parts warehouse, please also see my other offers Info: We have over 20,000 DEMAG items in stock! Check my other offers from our warehouse inventory as well!

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Fedpfx Aext Tgnjd Nopg Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Single-column lifting and rotating device, 5-ton load capacity, mono, mobile, lifting and turning. Protec turning device / positioner Syncrolift. Drive column with adjustable height, remote control (wireless and manual). Electric column adjustment with powered travel carriage. Load capacity 5,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2.2 kW. Fpedsx Thnpopfx Ad Neg

Condition: new, Year of construction: 2025, overall weight: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Fpjdpfjx Thq Rsx Ad Neg Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Torque 5180 N-m 2 to 10-Ton Capacity Available Upon Request

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Fodpfex Tcm Tox Ad Nepg Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Fpjdpfx Aex Th Susd Nsg Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: used, Year of construction: 2021, operating hours: 169 h, machine/vehicle number: GS30D-40992, Empty weight: 1.329 kg Lifting capacity: 227 kg Working height: 780 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Fpedpfx Adew Dalno Nsg Tyre brand: - Transport dimensions (LxWxH): 1.82x0.82x2.16 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 112 h, machine/vehicle number: GS30D-45787, Empty weight: 1.337 kg Lifting capacity: 227 kg Working height: 780 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 1.82x0.82x2.16 Fodpfx Adoxyc Ubo Nepg Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 143 h, machine/vehicle number: GS30D-40993, Empty weight: 1.329 kg Lifting capacity: 227 kg Fedpfx Ajxwir Ujd Nspg Working height: 780 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 1.82x0.82x2.16 Please contact PFEIFER GROUP for more information