Used Reel-Director Combination for sale (4,908)

Condition: good (used), Year of construction: 1999, Lg 33922 Unwinding and guiding unit SOPREM BRH 7-200-80U-1250 BAP Djdpfx Akohuwacomoku Web width: max. 200 mm Coil weight: max. 1,250 kg Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Web thickness: approx. 0.8 to 3 mm Working direction: from right to left

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. Dkjdpfx Ajz Ebxyjkmou About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Dksdpfx Aez D Ihfekmsu

Condition: used, operating hours: 550 h, power: 285 kW (387.49 HP), maximum speed: 30 km/h, front tire size: 800/65 R32 178A8 Mitas AC7ON, rear tire size: 540/65 R30 168A8 Mitas AC65 IMP, Equipment: air conditioning, cabin, onboard computer, Base machine: Combine harvester - Pressurized cabin (3.3 m) with high-performance automatic climate control (heating/ventilation/air conditioning) - Automatic temperature control (ClimaTrak). - Cooler compartment with active cooling, large cup holders, additional sockets (2 x 12 V) - Electrically adjustable and heated exterior mirrors Dkedpfx Akez Na Nremju - Two-blade windshield wiper with two speeds - Windshield washer system and intermittent function. - Driving speed lever for hydrostatic drive with integrated control buttons for the following functions: AutoTrac resume. Height and horizontal adjustment of the header. Two-stage feeder, raising and lowering the header, control of the pivoting frame for lateral tilt. - Three-stage header return and reel return - Controls for activating the unloading auger - Quick stop for header/unloading auger. - Rotary stop alarm when the threshing unit is switched off. - Controls and instruments: Extended automatic combine harvester settings. - TouchSet (automatic combine harvester settings) with the following functions: Fully automatic setting or user-defined preset of threshing drum speed, threshing concavity gap, cleaning fan speed, as well as upper and grain sieve opening. - CommandTouch control console. - Electro-hydraulic header and threshing unit control. Automatic reel speed control (Dial-A-Speed). Header reverser with reel reversing function. - Package for header control: Height return adjustable to three positions. Reel return. - Active cutterbar pressure control for flexible cutterbars. Sensor system for header height. - Seat: Centrally located driver's seat with air suspension, longitudinal damping, and folding armrest. Integrated passenger seat (for training purposes). Seat belts for driver and passenger. - Lighting: Work lights at the top. Headlights with high beam. Headlights with low beam. Transport and work lights. Lighting for grain tank and unloading auger. Warning lights and tail lights with integrated turn signals. Three rotating beacons. Brake lights. Maintenance light package. - Display: CommandTouch multifunction display on the corner post with: Display for engine power. - Display for engine speed. Display for adjustment of the scraper plates and the automatic reel speed control (Dial-A-Speed). Display for transmission gear or transmission shift group (only for transmissions with electrical shifting or ProDrive transmissions). VisionTrak display (grain loss, over-threshing monitor). Display for active header control and header cutterbar pressure. - CommandCenter color display with the following display and control functions: Data on combine harvester/header/engine. Diagnostics and calibrations. - Feeder: Reinforced tilt cylinder. Central header locking via multi-coupling. Integrated mechanical cutterbar angle/horizontal adjustment on the feeder. - Hydraulically operated mechanical reversing gearbox. Stone trap with tilting function. - Threshing drum with a 660 mm diameter, high inertia and electrically adjustable threshing concavity. - Rapidly pivoting intensive rasp bar, 800mm threshing drum with high capacity and fully meshed separation basket, and discharge drum, DynaFlow™ Plus cleaning system with preparation system for six augers and upper and grain sieves with high-performance elements. - Grain transport: Modern grain loss monitoring system with digital signal processing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,706 h, power: 366 kW (497.62 HP), gearing type: hydrostat, fuel type: diesel, maximum speed: 30 km/h, first registration: 07/2017, next inspection (TÜV): 07/2026, rear tire size: 500/85 R24, machine/vehicle number: YHG233775, Equipment: air conditioning, cabin, hydraulics, lighting, rape cutter, trailer coupling, On behalf of an authorized party, we are offering the following used item for sale: Case-IH combine harvester AF 7240 with ST rotor Chassis number: YHG233775 Longitudinally arranged ST rotor 30 km/h version 6-cylinder Power: 366 kW (497 hp) Front wheels: Track drive, sprung, 610mm Rear wheels: 500/85 R24 HID work light package AC FAN automatic fan speed adjustment Adjustable discharge spout Cross-flow transverse flow fan Hydraulic drive Redekop chopper Xtra Chop Accu Guide complete Steering on Egnos – retrofitted with existing RTK antenna LED work light package, 4 x rear, 1 x grain tank inlet Additional cameras Yield and moisture measurement Radio, two-way radio Last inspection before the 2025 harvest, approximately 300 ha Minor scorching above the tank, damaged cables have been repaired Header 9.15 m, Series 3050, steplessly adjustable Type: 306 Year: 2017 Serial number: 868112015 Hydrostatic reel drive Automatic adjustment of reel speed Reel horizontal adjustment Hydraulic multi-quick coupler Short stubble divider Hydraulic rapeseed knife Rabolon ear lifter Header wagon TAM Leguan quattro 30 Type: SWW 30FT VIN: WEGTP28F3HAAA3318 Djdjzabtdspfx Akmoku Year: 2018 2-axle 25 km/h LED lighting set Tires: 10.0/75-15.3 Price upon collection. The item is located in 49419 Wagenfeld-Ströhen and must be collected from there by the buyer. This offer refers exclusively to the described item. Other items that may be shown here are possibly part of a different offer. Errors and omissions excepted. Inventory number: 2926-26

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,109 h, power: 372.9 kW (507.00 HP), total height: 4,830 mm, total length: 10,110 mm, total width: 4,170 mm, 2014 | John Deere S680 | Used Combine Harvester | 3,109 hours Location: Illinois, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 507 hp diesel engine, 14,100 L grain tank, 26 ft unloading auger, Pro-Drive transmission, and Sidehill Performance Package. Equipped with a premium cab, 650/85R38 duals, 28LR26 rear tires, factory manual-fold grain bin extension, and GS3 7" touchscreen. ✔ Premium cab ✔ Pro-Drive transmission ✔ 5-speed feederhouse ✔ 650/85R38 duals Dksdpfxsz Elm Uo Akmou ✔ 28LR26 rear tires ✔ 2WD ✔ Factory manual-fold grain bin extension ✔ 26 ft unloading auger ✔ Chopper with manual tailboard ✔ HID lights ✔ Round bar concaves ✔ Deep tooth chaffer ✔ GS3 7" touchscreen ✔ Sidehill Performance Package Key specs: Engine power: 507 hp (rated: 473 hp) Engine hours: 3,109 hr Operating weight: 20,750 kg (45,746 lb) Grain tank capacity: 14,100 L (400.1 bu) Unloading rate: 135 L/sec (3.8 bu/sec) Unloading auger length: 6.9 m (22.6 ft) Fuel tank: 1,250 L Engine displacement: 13.5 L Emission standard: Interim Tier 4 Separator type: Rotary Total cleaning area: 5.6 m² Chaffer area: 2.5 m² What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 4,260 h, power: 248.6 kW (338.00 HP), color: green, total height: 4,500 mm, total length: 8,500 mm, total width: 3,700 mm, 2011 | John Deere 9670 STS | Used Combine Harvester | 4,260 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 338 hp diesel engine, 10,572 L grain tank, 22.5 ft unloading auger, extended wear round bar concaves, extended separator package, and Sidehill Performance Package. Equipped with duals and a high-torque variable-speed feederhouse drive. ✔ 2WD ✔ 520/85R38 duals ✔ 18.4 x 30 tires ✔ High-torque variable-speed feederhouse drive ✔ Extended wear round bar concaves ✔ Extended separator package ✔ Deep tooth adjustment ✔ 22.5 ft unloading auger ✔ Sidehill Performance Package ✔ Chopper ✔ Duals Key specs: Dedpfx Aoz Ekpzokmoku Engine power: 338 hp Engine hours: 4,260 hr Operating weight: 14,815 kg (32,661.5 lb) Grain tank capacity: 10,572 L (300 bu) Unloading rate: 116 L/sec (3.3 bu/sec) Unloading auger length: 6.9 m (22.5 ft) Fuel tank: 946 L Engine displacement: 9.0 L Emission standard: Tier 3 Combine type: Corn/Bean Separator type: Rotary Chaffer area: 1.9 m² Sieve area: 1.6 m² What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, Year of construction: 2023, operating hours: 250 h, power: 400 kW (543.85 HP), maximum speed: 30 km/h, front tire size: TW IF 710/70 R42, rear tire size: SW VF 520/80 R26, Equipment: air conditioning, cabin, onboard computer, Engine: - FPT Cursor 13 engine - Tier V emission stage - Hi-eSCR2 technology - 12900 cm³ displacement - 6 cylinders - Turbocharger - Intercooler - Common rail injection - Rated power: 365 kW at 2100 rpm - Max. power: 400 kW at 2000 rpm - Self-cleaning and pivoting radiator rotary screen - Fuel tank 1300 l - AdBlue tank 130 l - Rotary screen brush Drive and axles: - Hydrostatic drive - 2-speed gearbox with electronic gear preselection - Overload protection - Parking brake - Wet multi-disc brakes – electro-hydraulic differential lock - Adjustable rear axle - 30 km/h at reduced engine speed Dksdpoz Na H Djfx Akmou Feeder: - Automatic feed pressure control and cutting height adjustment of the cutter bar - Inclination and angle adjustment of the cutter bar - AutoFloat system - Hydraulic quick coupler for cutter bar - Hydraulic reel drive - Hydraulic engagement of cutter bar/reel and feeder - Dynamic feed roll (450 mm diameter, 1100 rpm, reducible to 640 rpm, 8 bars) Cutter bar: - 760 CG, 10.70 m Varifeed: Bolted short crop dividers - Scraper strips on the feeder - Lower scraper strips - Reel - Reel speed sensor - Header lifters - Left and right rape seed separation knives - Kit for rape seed separation knives - Rear wall extension - Knife position sensor - Replacement knives - Knife guard - Knife bar 3" fine - Knife drive - 57.5 cm adjustment range - Spare wheel - Guide wheels Threshing and separation: - 2 longitudinal rotors - Counter-rotating for threshing and separation - 2.64 m rotor length; 0.559 m diameter - Engine speed with 2 speed ranges: 331 - 697 or 668-1407 rpm - Electrically adjustable from the cab - 1 threshing basket per rotor with 18 basket bars - 123° wrapping angle - Electrically adjustable - 2 separating baskets per rotor - 1 finger basket - 148° wrapping angle - Discharge drum: 4 bars - 1.57 m wide, 0.40 m diameter - Speed 800 rpm - Separating basket - wrapping angle 54° - Total threshing and separation area 3.06 m² - Adjustable guide plates in the rotor covers for controlled material flow - Twin Pitch PLUS rotors Cleaning: - OptiClean cleaning system - Increased cascade stages - Counter-rotating pre-cleaning floor and upper sieve - Electrically adjustable vane sieves - Total sieve area 6.50 m² - 2 separate re-threshers - Electronic monitoring - Automatic slope compensation up to 17% of the pre-cleaning floor - Cleaning fan and sieve box - Cleaning fan with two fan outlets - Speed adjustable from 200 to 1100 rpm - Access to the pre-cleaning floor through large service openings on both sides of the machine Grain elevator & grain tank: - 12,500 l grain tank volume - 126 l/s unloading rate - 6.4 m unloading spout - Grain tank with 2 level indicators - Grain tank lighting - Grain sample extraction - Adjustable work lights on the unloading spout Straw and chaff distribution: - 6-row straw chopper and hydraulically driven chaff spreader - Tool-free change from straw laying to chopping operation - DualChop chopping bar - Active straw distribution OptiSpread plus - Adjustable working width - Distribution and throw direction (in case of side wind) Driver's seat: - Adjustable comfort seat with air suspension - Partial leather seat with additional comfort features - Passenger seat - 3-way adjustable steering column, automatic climate control - Refrigerator with adjustable temperature - Multifunction lever: Direction of travel and travel speed - Raise/lower cutter bar - Inclination adjustment - Reel

Condition: used, Year of construction: 2005, - Year of manufacture of the NH cutterbar: 2005 - Year of manufacture of the Biso header: 2007 - 20 ft. Djdpfx Akez Na D Aomeku - Hydraulic reel drive - Biso CX 100 rape cutterbar attachment with 2 electric side knives

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. Dkodpfxjz Hngme Akmju At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2010, - Corn header attachment - Approximately 3,000 [units/pieces/etc.] - Flange drive - Protective tarpaulins - Parking supports Dkedpfsz Nbcyox Akmou - Auxiliary chassis

Condition: used, functionality: fully functional, machine/vehicle number: 35539, mileage: 109,900 km, power: 310 kW (421.48 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, emission class: euro6, suspension: steel-air, loading space volume: 10.3 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Combination sweeper/vacuum truck with water recycling system Engine OM471, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, hill start assist, front axle 8t, 3-leaf springs, rear axle air-suspended, rear axle 13.4 t with differential lock, steerable and liftable 7.5 t trailing axle, axle load measuring device, rear underrun protection, pneumatically extendable M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), 2 seats, driver and passenger comfort seats, tinted windshield, sunroof, heated mirrors, electrically adjustable, electric windows, comfort central locking system, multifunction steering wheel, digital tachograph VDO, pre-installation for toll collection system, air conditioning, cruise control, speed limiter, reversing camera, rotating beacon on the cab roof Dedpfxez Hm Rwo Akmjku Wall thickness 5 mm, diameter 1700 mm, material: stainless steel, fresh water tank 2.7 cbm, sludge tank 7.6 cbm, gross volume 10.3 cbm Water ring pump KWP 2000, flow rate 2000 cbm/h, max. vacuum 0.85 bar, max. pressure 0.5 bar The vacuum pump is installed in the fresh water tank and supplies itself with operating water, with additional sound insulation and cooling by water insulation. Suction and pressure operation is also possible in the tilted position. Automatic separator emptying when switching to pressure operation. Opening door with lever lock for quick access to the pump compartment. Pressure relief valve set to 0.5 bar. High-pressure system Kaiser pressure converter KDU 148-350. Flow rate up to 350 l/min at max. 200 bar. Lockable side box made of stainless steel on the right side of the tank, length 3,600 mm, control panel and holder for radio remote control, LED lighting, attachment tray for additional suction hoses, separator in front of the vacuum pump with automatic emptying, full-torque lid made of stainless steel with Kaiser clamping ring and float level indicator, suction and outlet connections NW 100 (pneumatically operated), tilting device for the body for quick emptying by means of a multi-stage hydraulic tilting cylinder, high-pressure hose reel with a capacity of 220 m (1") or 150 m (1/4").

Condition: used, functionality: fully functional, machine/vehicle number: 30242, mileage: 99,900 km, power: 338 kW (459.55 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6c, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Combination sweeper/vacuum truck with water recycling system ADR equipment, engine D2676LF52, front suspension parabolic 9.5t, rear suspension air, differential lock rear axle, trailing axle steerable and liftable, hill start assist, lane keeping assist (LGS IV), disc brakes, MAN BrakeMatic, emergency braking signal (ESS), emergency brake assist (EBA2), ABS, ASR, ESP, exhaust pipe raised on the right, tires: steering axle 385/65R22.5, drive axle 315/80R22.5, tires 385/65 R 22.5 - 315/80 R 22.5, fuel tank 400 liters - 60 liters AdBlue, length/width/height 9.550/2.550/3.800 Cab: 2 seats, driver's comfort seat with air suspension, passenger seat static, central locking, cruise control, air conditioning, fine dust and pollen filter, tilting roof, speed limiter 90 km/h, TollCollect pre-equipment, digital tachograph Conti, MAN Tronic on-board computer, MAN Media Truck Advanced radio with Bluetooth and navigation, radio system, windshield, door windows and side windows tinted, electric door window lifts, sun visor, sun shield, mirrors heated and electrically adjustable, reversing camera, 2 rotating beacons on the cab roof Dodpfsz Hnf Ajx Akmsku Superstructure KROLL with water recycling: extension piston, 3-way adjustable piston with volume division water/sludge: approx. 3 m³ / 10 m³, 5 m³ / 8 m³, 7 m³ / 6 m³, filling level indicator in front of and behind the piston with internal float and external scale, hydraulically upward-opening full-size top cover with hammer head locking, lower suction connection, water treatment unit, all working functions fully automatically controlled via CAN-BUS technology (KROLL-CANMATIC), combined operation of suction and high-pressure flushing, variable water and sludge chamber, emptying by means of discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention, vacuum pump CVS water ring pump VacuStar WR 2500, suction capacity 2,500 m³/h with pneumatic pressure control valve, high-pressure pump URACA P 3-45 (approx. 348 l/min at 205 bar), hose reel cassette with simultaneous telescopic boom DN 125, large HD reel swiveling by 180° for 240 m DN 25, small HD reel for 60 m / DN 13, central control panel in stainless steel housing with louvre at the rear right, second control panel mounted on swiveling HD reel, remote control, discharge apron made of aluminum, closed hose box made of aluminum on the right, open hose box made of aluminum on the left, electric winch, rope pulley, vice, storage box, LED ambient lighting, LED work lights with 20 m cable and with approx. 15 m cable extension in drum, hand washing basin, ladder, fire extinguisher, reversing camera, rotating beacon at the rear.

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Dkodpsz Iqqkjfx Akmeu Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design Dsdpfjzwnmqjx Akmeku • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. Dodpfx Ajxd Thmskmjku ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. Dodpjz Eft Isfx Akmoku The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: excellent (used), SCM minimax thickness planer Planing width: 400mm, Dksdpfez Izcdox Akmsu Motor: 5 KW, 3 planer blades, 1 feed speed for the thickness planer, Manual adjustment of the thickness planer table, Maximum planing thickness on the thickness planer: 230mm, Planer bed length: 180cm, Planer fence adjustable to an angle, Very good condition.

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: - Cutting length 2500 mm - Cutting width 1200 mm - Cutting height 90 mm - 3 milling speeds - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 Djdpfxoz Apgij Akmsku The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combination machine Reference: R-J047R

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Dkodez Ecfhjpfx Akmju Grinding table 2500 x 930 Includes existing grinding belts.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, Dkjdpfx Ajzxxqvskmju - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Dkodozn I Aaspfx Akmou Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2004, operating hours: 2,869 h, maximum speed: 20 km/h, front tire size: 710/70 R38, rear tire size: 460/70 R24, Equipment: cabin, onboard computer, - 1 Biso cutter bar VX 750 - 1 Otema tandem transport trailer - Rapeseed cutter blade - Rear camera - Bluetooth radio - Fire extinguisher - Trailer hitch Dkodez Nbddspfx Akmou - Air conditioning - Lighting

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Dkodpfx Akjz E Sgujmsu Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Mortiser: Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Djdpfez Ef Ifox Akmjku Type: 2200 Planing width: 50 cm Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.