Used Reinartz Oil Press Installation for sale (23,422)

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. Kdsdpfswl Afysx Agpsl The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Kjdpsph Uk Nsfx Agpodl Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Kdjdjitylgjpfx Agpjl Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Year of construction: 1999, condition: used, machine/vehicle number: 20DKPE, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 20000 liter double-walled storage tank for the storage of diesel as follows . Nominal capacity 20 cbm piece 1 used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted Color equipment paint RAL ; . However, you can always bring your own color wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Piece. 1 dipstick Piece. 1 venting nozzle Piece. 1 filling nozzle piece. 1 new limit switch piece. 1 new leakage detector with filled up leakage liquid piece. 1 conductor piece. 1 suction line Form . cylindrical storage tank with feet/console tank mass length ca 6.800 mm plus diesel pump 500 mm diameter approx. 2.000 mm weight approx. 4.400 kg Storage above ground Compact diesel dispenser Penta with a digital display . Dispenser new . Hose length 3 mtr . On request also longer . Approved automatic nozzle . Pump 230 Volt max 60 Ltr/min. ===== Top on offer . Liquid fertilizer - AHL tank units in the size of 10,000-100,000 liters. Of course you can also design your tank system! All our equipment is extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. Could we convince you of our offer? If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you. Price/ Shipping Kdsdpfx Aecl Sghogpol The price for the gas station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank Environmental Protection Wozniack

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Kdsdpfeyazdijx Agpjl Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request Kdedpfx Agsimwp Sepjl New machine

Condition: used, operating hours: 32,574 h, Ingersoll Rand SSR MH-55 Rotary Screw Air Compressor – Used Industrial Compressor Description: Ingersoll Rand SSR MH-55 industrial rotary screw air compressor, suitable for workshop, manufacturing, fabrication or general factory compressed-air supply. This is a heavy-duty industrial compressor with integrated control panel, air pressure and temperature gauges, hour meter, electrical cabinet and internal compressor/motor assembly. The machine is currently in used condition and has been removed from regular service / stored on site. The hour meter show approximately 32,574 hours. Key features: Kdsdpfjy Ry E Uex Agpel Manufacturer: Ingersoll Rand Model: SSR MH-55 Type: Rotary screw air compressor Integrated control panel Air pressure gauge Temperature gauge Hour meter fitted Internal compressor and drive motor present Industrial cabinet-mounted unit Suitable for production or workshop air supply Good candidate for recommissioning, refurbishment, spares or export Condition: It is offered sold as seen. Buyer should inspect the compressor and satisfy themselves as to running condition, electrical requirements, service history, capacity, pressure rating and suitability before purchase. Important note: Professional inspection, lifting, loading, transport and recommissioning will be the buyer’s responsibility unless otherwise agreed. Electrical and pressure-system checks should be carried out before use. Ideal for: Engineering workshops Manufacturing sites Fabrication shops Spray shops Industrial air systems Compressor refurbishment specialists Spares or parts use Viewing recommended. Loading / removal: Buyer to arrange, unless agreed separately

Condition: used, functionality: fully functional, machine/vehicle number: M237 026, power: 1,600 kW (2,175.39 HP), fuel type: gas, Year of construction: 2005, operating pressure: 10 bar, 2x used steam boiler installation Fabricate: VIESSMANN Type: M237 026 Year: 2005 Steamcapacity: 2.300 kg/h Max. pressure: 10 bar Kdodpfx Aey Tpm Hjgpsl CE 0035 Complete with appendages, Weisshaupt burner G8/1-D ZMD, controlpanel, economiser, automatic blowdown valve on conductivity, 2 frequency controlled feedwaterpumps, sample cooler. Also 4500 liter cascade deaerator. Available as single boiler or package deal.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Kdedpoy Iplfefx Agpel Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: good (used), Toggle Press - Hot Foil Stamping Machine Manufacturer unknown; very heavy-duty design Ksdpoy Shz Tjfx Agpedl Upper plate (heated) 24 x 37 cm Lower plate 39 x 37 cm

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: Kedpfxoy H Dv Ao Agpsdl • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Kdjdpsxa Hy Ujfx Agpsl Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Year of construction: 2006, condition: good (used), Oilseed screw press Farmet FS1000, 55kw long. In a good condition, complete, ready for loading. Capacity up to 1.400kg/h. Kodpfjxrc Ixox Agpodl

Year of construction: 2006, condition: good (used), functionality: fully functional, Screw press Farmet FS1000 for rapeseed, soybean, sunflower. Capacity from 800kg to 1.000kg, depending on motor. It is complete, in good condition. Manufactured in 2006 Kdodpfetxc Itex Agpel

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h Kjdpfxetxinaj Agpedl The price refers to one line (exstruder+press)

Condition: used, Year of construction: 2007, operating hours: 2,568 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 4,900 kg, pressure: 200 bar, electrical fuse: 27 A, We offer this used LUX VM-TEC K50V4 baler for paper, foil, and plastics, year of manufacture 2007. The baler comes complete with conveyor. Model: K50V4 Year of manufacture: 2/2007 Production number: abba359 Serial number: Cont-000089 Power: 18.5 kW Current: 27 A Voltage: 400 V Ksdpfxjy H E R Ie Agpodl Frequency: 50 Hz Maximum pressure: 200 bar Weight: 4,900 kg If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 2002, Air compressor (oil-free) CompAir R 180 Model R 180 TS-Z11 Year of construction: 2002 Weight: 3860 kg Volume flow: 17.0 m³ / min Intake pressure: 1 bar Stage pressures: 2.4 / 12 bar Kdedpfeu Rphqex Agpel Installed motor power: 110 kW The compressor was regularly serviced and inspected until it was decommissioned.

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Kdedpfxou Rnzie Agpjl Mains frequency: 50 Hz The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000 Ksdjx I Nfrspfx Agpedl

Condition: excellent (used), Year of construction: 2002, operating hours: 46,357 h, functionality: fully functional, Oil-free screw compressor Atlas Copco GA75VSDFF Inverter and dryer integrated. Kjdsyz R U Iopfx Agpodl 160 kW 7.5 bar 27.90 m3/min Year of manufacture: 2002 Operating hours: 46,357

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Kdodpfx Aod R Saqjgpol Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers • electric counter • delivery conveyor to the right

Condition: excellent (used), Year of construction: 2002, operating hours: 122,000 h, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), fuel type: electric, volume flow: 1.56 m³/h, operating pressure: 8 bar, noise level: 65 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Kedpfx Agorn S Hpjpodl Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Kjdpfxepvlf Ss Agpjdl Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Kdsdpfx Agodhzf Iopsl Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Power (PS) 16.0 bar Continuously adjustable Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Dimensions (LxWxH) in mm: 450 x 660 x 860 Kedpfowpupxex Agpjdl Swivel casters with parking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.