Used Rema Expert Pro+ for sale (8,386)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Chsdpfxszp Nyce Ap Aoa Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Chsdpfx Apjzp Nz Hs Asa Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 Cjdpfx Ajzk Nitjp Asha LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Chjdpfezryuvsx Ap Aea Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Rema, Double grinding machine type DS04/175 -Grinding discs: max. Ø 175 x 25 x 51 mm Chsdpfxozruq So Ap Aea -Motor power: 0.3 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 380/220/H235 mm -Weight: 16.1 kg

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment: Cedpfx Apjza Dwxe Aoha  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm  Column design

Condition: excellent (used), Catalog number: 7938 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic pressure - blade guard - pneumatic blade extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 7.5kW - dust extraction nozzle diameter: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm Codpfx Apozrxgdj Aeha - outfeed roller table: 1650mm - roller table height: 900mm - roller table width: 510mm - overall machine dimensions (length/width/height, without table): 1200x640x1280mm - weight approximately 500kg ADVANTAGES - Made in Poland - Original DTR documentation - 2 roller tables - Pneumatic blade adjustment - Used saw, very good condition Net price: 14500 PLN Net price: 3455 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8062 Technical specifications: - max. main blade diameter 500mm - main blade adjustable up/down and at an angle, electrically - spindle diameter 30mm - spindle locking - with a crosscut fence - with a side fence + protractor - crosscut fence length 3000mm - cutting width adjustable with an electric guide from the upper control panel, 1550mm - with a side fence and an angle-adjustable guide - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 6kW - blade adjustment up/down adjustable from the upper control panel - angle adjustment adjustable from the upper control panel - 2 types of rotation speeds - pressure beam - START/STOP switch in the crosscut table - protractor - table extension 2000x1530mm - large blade guard - dust extraction nozzle diameter 100mm, 120mm - dimensions L/W/H 3600x3800x1600mm - weight approximately 1200kg Advantages: – Polish production Chsdpfozrwbaox Ap Asa – with a scoring saw – START/STOP switch in the crosscut table – pressure beam – original DTR documentation – unpainted – used saw, very good condition Net price: 29900 PLN Net price: 7120 EUR depending on the exchange rate of 4.20 EUR (Prices may change due to larger fluctuations)

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm Chodpfx Apozrnt He Aoa - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table Chedpszrllgofx Ap Aja - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg Csdpfx Apjzrk N Rs Asha - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8018 TECHNICAL DATA - max. blade diameter 400mm - blade bore diameter 30mm - blade guard - adjustable arm (up/down) - max. cutting height 100mm - max. cutting width 540mm Chedpfxezf Iyys Ap Aea - hydraulic blade feed - 2 infeed rollers on the table - outfeed roller on the table - motor 3.7kW - hydraulic pump motor approx. 0.55kW - diameter of dust extraction port 100mm - roller width 530mm - dimensions of the infeed roller table 2000x640x910mm - dimensions of the outfeed roller table with scale 2000x640x965mm - machine dimensions (L/W/H) 1900x1540x1820mm - weight approx. 750kg ADVANTAGES – manufactured by the Polish brand REMA – DTR documentation (Technical Documentation) – roller tables – very good condition – used saw Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Top extraction port diameter ⌀80 mm - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR Codpfx Apozabgde Aeha (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included Chjdpfx Apszhv Abj Aja – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number: 7885 Chsdpfszhvbdex Ap Aoa TECHNICAL DATA - Max main blade diameter: 400 mm - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30 mm - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: used, 3D Systems SLS PRO 230 Sinterstation Pro Fully operational and complete with extensive accessories Chodeyghifopfx Ap Asa

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C5300s colour production system. Item for sale: 1 x Ricoh Pro C5300s with the following features: Includes SR5100 booklet finisher. Counter readings: Total: approx. 118,014 pages Colour: approx. 88,410 pages Black: approx. 29,604 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. Chjdpfx Asylugnop Aea For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro C5300SL’ colour production system Items for sale: 1 x Ricoh Pro C5300SL with the following specifications: Includes SR5120 booklet finisher Includes TR5050 trimmer unit Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Chsdpfx Aezaqfcjp Aea Total: Approx. 405,670 pages Colour: Approx. 86,248 pages Black: Approx. 319,422 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers Csdpfx Apsif Ek Rj Aeha • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min Csdpefnlkwjfx Ap Aoha • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: refurbished (used), Year of construction: 2017, Vutek H2000 UV Hybrid Printer fully refurbished with 3-month warranty Colors: 6C CMYL LCLM, 2 White Chjdpeyzg Tysfx Ap Asa Resolution: 1000 dpi with 7pl Ultradrop Print width: 205 cm, print height: 5 cm Speed up to 90 m²/h

Condition: used, functionality: fully functional, machine/vehicle number: X137J311435, counter reading (black): 1,021,339, counter reading (color): 781,204, With this offer, you are purchasing a used “Ricoh Pro C7100X” color production system Items for sale: 1 x Ricoh Pro C7100X with the following features: Includes Color Controller E-43A Includes Booklet Finisher SR5060 Includes Paper Deck Vacuum Feed LCIT RT5100 Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,802,543 pages Color: Approx. 781,204 pages Black: Approx. 1,021,339 pages Condition: This listing is for a used device, which may show signs of wear Cedpfx Aezmn Slop Asha (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, you’re welcome to contact us directly.

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 135 mm, cutting width (max.): 1,400 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,500 rpm, total length: 3,500 mm, total width: 2,300 mm, total height: 1,500 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, saw blade guard, – manufactured in Poland – feeding the trolley on steel bars – year of manufacture: 2008 – technical documentation, CE marking TECHNICAL SPECIFICATIONS: – blade diameter: 300 – 450 mm Cjdpfxoy Ux Ips Ap Aoha – scoring blade diameter: 120 mm – max. cutting height: 135 mm – cutting width from the right side: 1400 mm – trolley length: 3000 mm – blade angle adjustment: 0-45° – cutting height adjustment – main motor: 6 kW – scoring blade motor: 0.75 kW – scoring blade spindle diameter: 20 mm – main blade spindle diameter: 30 mm – adjustable blade speed: 3500 / 4500 / 6000 RPM – scoring blade rotational speed: 8000 RPM – nozzle diameter: 80 mm and 120 mm – fence with two pawls: 1900 / 3200 mm – extendable side trolley attachment: 700 mm – transport dimensions (L/W/H): 350 / 230 / 160 cm – weight: ~ 1300 kg

Condition: used, REMA double-grinding stand with dust extraction system and lighting Chedpfxezpflzo Ap Asa RPM 1450 Power 2.5 HP

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Chjdpfx Aozph Rajp Asa Flexibly adjustable clamping force Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.