Used Remonnay Recutting Circular Saw for sale (6,193)

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edging and resawing machine, type DR8/225, manufactured in 2007. 7-position variable adjustment, 2 x 110 kW motors each. Ndodpfx Ajfcltgegrjb Pre-trimming saws for side boards. Cutting height 225 mm. S-type singulation with infeed roller table. Includes tilting and aligning table. Chip separator with two deflectors. Board cross conveyor. Roller conveyor with stripping device. Electrical control cabinet with control panel. Includes all accessories (circular saws, etc.).

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor Ndedpsw I Sg Djfx Agrsb • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: good (used), Year of construction: 1996, functionality: fully functional, Circular saw SICAR EXPRESS 32 year of construction 1996 S/N 800066 Manufacturer SICAR Italy Aluminum sliding carriage 1600mm main saw motor 5,5hp ( 4,0kW ) motor independent scoring motor 0,55kW Blades with 300/350/400 mm Cutting height of 110 mm at 90° and 80 mm at 45°. Manual tilt and height adjustment Inclination of main saw blade and scoring blade reaches 45° Nsdpstw D Tbofx Agrodb Extra ruler for angular cuts Workpiece hold-down device Top extraction also for 45° cuts Voltage 380 V, 50 Hz. CE marked 720 kg Technical data subject to change

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Nedpfjz Eft Ijx Agredb Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, Year of construction: 2019, operating hours: 816 h, functionality: fully functional, saw blade diameter: 600 mm, - Single-head cutting saw for aluminum and PVC profiles - 600 mm cutting blade extending from below - Rotating table with a range of 20 - 90 - 20 degrees - Locking mechanisms for quick adjustment at standard angles - Infinitely adjustable hydropneumatic feed system - Lowering guard for the cutting area - Two horizontal and two vertical clamping cylinders Njdpfx Aoz Dq Tdegredb - Pneumatic cooling and lubrication system - Chip collection drawer - Chip extraction system - Two profile feed conveyors - Net price

Condition: used, Year of construction: 1988, used in excellent condition low mileage Ndsdpfxsz Ebtwo Agreb cleaned functionally tested partially refurbished Manufacturer: Graule Type: AGT Year of manufacture: 1988 Machine No.: 05 Motor kW: 1.6 kW, 220 V Swivels to the right up to °: 45 Swivels to the left up to °: 45 Tilts up to °: 45 Machine base is mobile Cutting height mm approx.: 85 Cutting length mm approx.: 380 Blade diameter mm approx.: 300 Saw blade bore mm approx.: 30/40 Dust extraction connection mm: 80 Space requirement approx. L x W x H mm: 600 x 900 x 1000 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: good (used), Year of construction: 1994, For sale is a robust oscillating circular saw from the German manufacturer Bäuerle, model PKS, manufactured in 1994. The saw comes from a public institution and has always been maintained and serviced. Ndedozz Nqljpfx Agrjb Thanks to its mobile base, the machine can be used flexibly within the workshop. Ideal for the precise cutting to length of solid wood, timbers, planks, and sheet materials. Technical data and features: +Manufacturer: Bäuerle +Model: PKS +Year of manufacture: 1994 +Motor power: 3 kW +Connection: 400 V +Mobile base +Saw blade diameter: max. 450 mm +Saw blade bore: 30 mm +Speed: approx. 2,800 rpm +Cutting height: approx. 125 mm +Cutting width: approx. 600 mm +Mitre range: 0–45° +Dust extraction connection: Ø 100 mm Solid and durable design for professional use in carpentry shops, joineries, and wood processing companies. If you are interested or have any questions, please do not hesitate to contact us! Price: Negotiable €3900 net.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Ndodpfszzp Epjx Agrob Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Nodpfxezy Upke Agrsdb Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, - Saw blade 400 mm Nsdpfegg N Axsx Agrodb - Double mitre - 4 pneumatic clamps - Mist lubrication system - 300 cm roller conveyor with length stop - Blow gun - Protective cover - Documentation - 400V

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm Njdpfx Agjxiu Dtoredb max. cutting height 170 mm motor 11 kW

Condition: used, Year of construction: 1989, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, cutting height (max.): 130 mm, cutting width (max.): 230 mm, saw blade diameter: 380 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,200 rpm, total length: 5,200 mm, total width: 2,500 mm, total height: 1,800 mm, overall weight: 4,300 kg, table height: 850 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, We are offering this used WEINIG KR 230 E high-performance parallel trimming saw with automatic return, manufactured in 1989. Ndodpfx Ajzkhbbegreb Additional equipment: - Electronic 1-axis adjustment with digital target/actual value display including subtraction electronics - Attachment sleeve for multi-blade cutting - Feed chain with screwed-on spikes - 2 lasers for indicating the saw blade position including adjustment spindle - Automatic cross and return conveyor - Central lubrication system Type: KR 230 E Year of manufacture: 1989 Machine No.: 24484 Serial No.: 91300 Order No.: 91307 Operating voltage: 380 V Frequency: 50 Hz Rated current: 50 A Wiring diagram No.: 862218 Weight: approx. 4,300 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Internal article number: 26081 Metal circular saw BIMAX TA 91-250 Nedpfezxgvaex Agrjdb Year of manufacture: 2003 + Roller conveyor 2550mm + Coolant pump + Various saw blades + Operating manual / Electrical wiring diagram Control: Siemens Simatic OP7 Dimensions (L x W x H): 130 x 110 x 195cm Weight: approx. 1000 kg Dimensions of roller conveyor: 260 x 70 x 105cm The machine is fully functional and can be inspected while powered on, by arrangement, in our heated warehouse covering an area of over 500 m².

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw TS 4000, max. cutting height 90 mm, at 45° max. 60 mm, Nedpfx Agjy N Sfqersdb max. saw blade diameter 315 mm, adjustable from 0° to 45°, motor 4 kW (5.4 hp), sliding table 2,000 mm, lifting and traversing mechanism, foldable table extension, miter gauge, SUVA saw blade guard, GS-certified for wood dust with CE marking, ex works, as inspected at the Seevetal location, excluding transport, subject to prior sale.

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm Ndodpfoztavvsx Agrob - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. Nsdpezyymbofx Agrjdb With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Max. cutting depth (45° miter cut): 60 mm Max. cutting width (rip cut): 920 mm The saw must be picked up.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Ndjdpfxszxxmkj Agrob Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension worktop extension undercutter Ndodpfxoqwduxe Agreb max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Crosscut fence with digital display Ndsdpfx Agsx Rugtorsb Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: used, Year of construction: 1987, Sawblade tiltable 45 ° Length of the rolling table 3200 mm cutting width 1000 mm Nsdpfxovyuqrj Agrjdb Motor output 5,5 kW weight of the machine ca. 1000 kg

Condition: good (used), saw blade diameter: 350 mm, – Saw blade, 350 mm – Double miter cut – Hydrocheck system – Protective cover – Mist lubrication system – 400 V Ndsdpfsunh H Esx Agrsb

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Nsdpfewrb U Tox Agredb

Condition: new, saw blade diameter: 400 mm, – Saw blade 400 mm – Double miter cut Ndedpfxoz Ehy Rj Agrob – Compound miter cut – 4 manually operated clamping devices – Protective cover – Documentation – 400V

Condition: good (used), Year of construction: 1995, machine/vehicle number: 117848, Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - Or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm Nsdpfxozibdge Agrjdb - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW - Feed rate of the saw blade, hydraulically steplessly adjustable - Vertical hydraulic metal clamping device + 2 hydraulic horizontal metal clamping devices - Coolant system - Infeed – roller conveyor with storage area 5000 mm - Outfeed – roller conveyor with measuring stop and positioning control 4000 mm - Space required approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg

Condition: used, Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles Nedpfx Aoc Ir Dvegredb -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg