Used Resistance Annealing Machine for sale (65,954)

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Ljdpfx Asn R Nhqekyehf

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS Lsdpfx Asyxrhdskyjhf 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Lodpjrdf Acofx Akyshf Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Lhjdpeycv Saofx Akyef Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Lsdpsv Dxm Sjfx Akyshf Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Lsdehubgzspfx Akyohf Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Ljdpfxehpf Iye Akyjhf Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial no. Year of manufacture approx. 1990 Comprising three water-cooled transformers with water-cooled rectifier block Technical data: Total rating at 50% duty cycle: 210 kVA (total output from 3 transformers) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 20.1 kA (total from 3 transformers) Primary connection: 380 volts, 50 Hz (three-phase) Details per each transformer: Rating at 50% duty cycle: 70 kVA (per transformer) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA (per transformer) Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on secondary side - DC power output via contact surfaces 50x50mm with M20x1.5mm threaded holes Lhjdpfx Akedzp Txjyof - Temperature sensor on each rectifier element and on each transformer winding - Connection cable: 7-core, cross section 50 mm², length approx. 6 m Overall dimensions (WxHxD): 700 x 710 x 440 mm Total weight: 480 kg Good condition

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Lhsdpjht U Snefx Akysf Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: used, functionality: fully functional, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System includes: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Spot Welding Gun: ELMA Vision CM Serial numbers: 9420357 IMA, 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system from ElmaTech, consisting of a powerful medium-frequency inverter (QSVM 9000/12000T) and the matching MF transformer spot welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: - Vehicle manufacturing - Automotive suppliers - Metalworking - Robotic welding cells (e.g., KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to its medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Information Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision CM (MF Transformer Spot Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Ljdsx Au Tnepfx Akyshf Duty cycle: 50% Power: 30 kVA Protection class: IP 21 Additional Information Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Ljdpfx Ajit Rq Hjkyshf Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS Ljdpfx Asy Du N Uokyshf GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Ljdpfeymn Hwex Akyehf Kind regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: LCS300-4T, CNC machine Elcede, type LCS300-4T, year of manufacture 12/2001, 400/50 Hz, working area 305 x 152.5 cm, machine dimensions 545 x 280 x 233 cm (height), control cabinet 80 x 64.5 x 190 cm (height), PC cabinet 84 x 75 x 198 cm (height), 3x Dietz fans, + cooling unit KKT-krans KLB-S26T-RS, year of manufacture 2001, 400V, 144 x 90.5 x 161 cm (height), 50,640 operating hours, desk with Fukitsu desktop, password Defi123+, desk 170 x 75 x 78 cm (height), in operation. Lodsy D Hwwjpfx Akyshf

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,028 h, functionality: fully functional, machine/vehicle number: type 2016-CV6+3P-1T, workpiece weight (max.): 1,500 kg, CNC machine Milla Plus, Pretek Unico type 2016-CV6+3P-1T, year of manufacture 2019, 400V, 1500 kg, working area 205 x 165 cm, 9 tool changer positions, 3028.2 read operating hours, machine dimensions 324 x 302 x 187 cm (height), PC stand 55.5 x 140 x 172 cm (height), CNC suitability: metal-glass-PVC. 2x vacuum pumps Becker type VTFL2.200/0-79, max 200/200 mbar, mounted in frame 140 x 77 x 174 cm (height). Dena mobile extraction type APL30-500, year of manufacture 2018, motor Esam mdeio jet AAO. Rack 106 x 32.5 x 125 cm (height) with accessories, in operation. Video available. Lhjdpfx Aoy D Hruokyef

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Lodpfxsy D S Uns Akyshf Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34 Ledpfxey D S S He Akyehf

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Ljdpfsy Ed Hfex Akyohf Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Ledsx Utd Espfx Akyjhf Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Lhjdpfxjkzi Ulj Akyjf

Condition: ready for operation (used), Hereby we offer a unique Italian ice cream machine from lady B trittico. Works on 220v normal plug connection and on water ideal to take with you on a trip or camping! The Bravo Lady B is a compact pasteurization and cooling machine, specially developed for smaller companies such as restaurants, bakeries or ice cream parlors. It combines two essential processes: 1. Pasteurization in the upper vertical vessel, with an adjustable temperature of +65°C or +85°C, depending on the desired pasteurization process. 2. Cooling in the lower horizontal cylinder, in which the mixture is quickly cooled to the desired temperature. A special feature is the patented system with which the hot mixture is transferred internally - without contact with the outside air - from the pasteurization vessel to the cooling cylinder. This guarantees maximum hygiene and enables efficient production. • Maximum filling quantity: up to 2 liters • Power supply: 230 volts, 3.2 kW • Connection system: ready to plug in • Cooling system: water cooling can be connected to a normal tap • Weight: 95 kg • Dimensions: 63 x 36 x 59 cm Maintenance and parts are still available from lobbia refrigeration technology Carpigiani Telme Taylor Kalte rudi Bravo trittico ice cream machines pasteurization pasteurization Lsdpfxowgw Tbe Akyjhf

Year of construction: 2020, operating hours: 55 h, condition: like new (used), PCM longitudinal and cross cutting machine / available immediately Manufacturer: PCM Year of manufacture: 2020 Type: Industrial cutting machine (123.20 / 123220CE) Function: Longitudinal + cross cutting Lhodpfx Aksy Exndjyjf Power: 20 kW Power supply: 400 V, 3 phases Frequency: 50 Hz Rated current: 30 A Control: 24 V DC Protection: IP55 Operating hours: 55h Pneumatics: 5–6 bar Cutting unit: multiple (≈5 pcs) blades Material handling: automatic centering, conveyor belt Production speed: 0 - 20 m/min Sheet width: 2400 mm Maximum material width: 2200 mm Maximum material thickness: 20 mm Blades: (diameter) 300 mm

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Lhsdpfx Akey Ehk Ijyef Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Ijbtt Shev Avvuedfjar Lsdpfxewdidme Akyjhf Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Lhjdjyzi Iaepfx Akyof Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test