Used Rex Homs 310 for sale (3,061)

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood Hodpfx Anshikployju TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: used, functionality: unexamined, Planing machine with planing shaft at the top and bottom Double-sided planing machine Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Hodpoy Ryx Ujfx Anyju Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Electrical connection 61 kW Jointing device at the bottom and top Machine mounted on 2 steel supports, which are approximately 1.5 m longer than the machine Year 1990 Condition: good

Condition: used, Planing machine with planing shaft at the bottom and top Double-sided planing machine Feed rate steplessly adjustable up to 110 m/min Hjdpfxsy Ry Dds Anyou Planing width max. 310 mm Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top Good condition

Year of construction: 1996, condition: used, Planing machine Rex Homs 310 With a slitting saw from below Planing rollers above and below Planing width 310 mm Hsdpfx Anechrgroyeu Without feed mechanism. The feed mechanism here was from the continuous press of the zinc coating system.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Hjdswfqh Aopfx Anyou Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: used, Planer machine available in 2-sided or 4-sided versions REX HOMS 2050 Working width max. 2050 mm Working height max. 310 mm Hsdpfx Asyid Uyenyju including swivel ring Constant table height with varying wood thicknesses The 8 images showing a REX HOMS 2050 in light blue were refurbished and delivered by joema several years ago and serve as an example.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Hodpjzrtn Nofx Anyeu Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Hjdpfx Aszrtpmsnysu Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: like new (used), Four-side planer REX HOMS-410 – German-made – Suitable for wet wood TECHNICAL SPECIFICATIONS: Max. planing width: 410 mm Planing height (two-sided): 200 mm Planing height (four-sided): 200 mm Spindle diameter: 40 mm Cutterhead motor power: 2 x 11 kW Spindle motor power: 2 x 5.5 kW Hodpfx Aerwl Dbjnyeu Feed speed: steplessly adjustable Feed speed adjustable via frequency inverter Three upper feed rollers Three lower feed rollers Two auxiliary rollers on the worktable Brake Minimum workpiece length: 450 mm Machine dimensions (L/W/H): 250 / 220 / 180 cm Weight: ~3500 kg

Condition: ready for operation (used), Year of construction: 2020, laser power: 54,000 W, number of axes: 3, This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details. • Cutting technology: High Definition Plasma • Tube capacity • Max tube length: 8,000 mm Hedpfx Aey Ephaenyju • Min/Max tube diameter: 100 mm / 750 mm • Min/Max wall thickness: 3 mm / 20 mm • Cutting capabilities • Straight cutting, bevel cutting, V bevels, Y bevels, 3D tube cutting • Axis configuration / movements • X (longitudinal): Double synchronized brushless drive with electronic axis control on both sides of the gantry; guide length 11,000 mm; double motorization • Y (transversal): Brushless drive with rack and pinion transmission • Z (vertical): Motorized torch positioning axis, speed up to 4,000 mm/min • Tube rotation axis: Synchronized spindle for tube rotation, tube length up to 8,000 mm • Bevel head – VBA WRIST • Rotation: ±540° • Tilt/bevel adjustment: ±60° • Cutting bevel angle: ±45° • Max tilt speed: 38°/sec • Tangential control during cutting • Arc-voltage torch height control • Mechanical feeler torch height control for bevel cutting • Torch collision protection • Machine construction • Heavy-duty machine frame • Longitudinal and transversal precision guides • Precision rack & pinion drive system • Brushless motors • Chuck / spindle • Synchronized spindle for tube cutting • Chuck size: 500 mm • Through hole: 150 mm • Tube supports • 3 manual support carriages with trapezoidal screw positioning • Plasma generator • Model: ESAB iSeries300i • Max current: 300 A (range 5–300 A) • Output voltage: 180 V • Power supply: 380 V / 50–60 Hz • Duty cycle (40°C): 100% • Maximum output power: 54 kW • Process gases • Plasma gases: Air / O2 / Ar-H2 / N2 • Shield gases: Air / N2 / O2 / H2O • Generator dimensions • 1219 x 898 x 1031 mm • Control system • ESAB VISION T5 CNC • 18.5” colour touchscreen, glove operable • OpWizard operator assistance software • Software • ESAB Tube Cutting Programming Software Additional equipment • Flat cutting table with slats, 1,500 x 1,000 mm

Condition: used, REX HOMS-410K — 12-Spindle Four-Side Moulder Manufacturer: REX Holzbearbeitungsmaschinen (Georg Schwarzbeck GmbH & Co KG), Germany Model: HOMS-410K Machine No.: 22.303 Year of manufacture: 1998 Voltage: 400V / 50Hz Hodpfoztxyysx Anysu Number of spindles: 12 Feed mechanization: HIT Operating hours: ~6,000 mth

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WJME2NNH60C286475, mileage: 306,184 km, first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, tire size: 385/65, axle configuration: 6x2, fuel: diesel, color: white, suspension: air, total length: 9,200 mm, total width: 2,550 mm, total height: 3,850 mm, loading space volume: 22 m³, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, onboard computer, tachograph, The subject of this advertisement is an IVECO Stralis 310 garbage truck with a Stummer Super Titan body. First registration: 2014-05-28 Power: 310 hp Engine capacity: 8710 cm3 Fuel: Diesel Mileage: 306,184 km VIN: WJME2NNH60C286475 Number of axles: 3 Drive: 6×2 Tire size I, II, III: 385/65, 315/80, 385/65 Wheelbase I-II: 4.20 m Wheelbase II-III: 1.35 m Gearbox: automatic Suspension: air suspension GVWR: 26,000 kg Curb weight: 16,825 kg Length: 10.20 m Width: 2.55 m Height: 3.85 m Body: Model: SUMMER SUPER-TITAN 2014 Capacity: 22 m³ Equipment: ABS central locking electric windows electric mirrors hydraulic power steering engine brake hydraulics immobilizer on-board computer manual air conditioning dual wheels reversing camera sun visor speed limiter adjustable suspension factory radio toolbox reversing signal rotating lights tachograph cruise control multifunction steering wheel OUR SERVICES We provide: Preparation of documentation for registration and customs clearance (including EUR.1 and T1) Transport of the vehicle to any location worldwide Vehicle service after purchase Repairs and maintenance of equipment purchased from us Upon customer request: Oil and filter changes in the vehicle and body. *Comprehensive service and support at every stage of the process. *Possibility of leasing older vehicles, even those up to 18 years old. Hodpfxjzt N S He Anyeu *If you would like to know more, please contact us.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Hsdpfx Aozuyhhjnyou Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Hedpsrxf Smjfx Anyou

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 32722760321, total length: 770 mm, total width: 970 mm, total height: 2,100 mm, warranty duration: 12 months, input voltage: 400 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, Vacuum filler REX RVF 327 – manufactured in Austria. Hodpfx Anoz D Uvvoysu The machine can be used for portioning, dosing and twisting. Completely factory refurbished and renovated by MM SERVICE 1 year warranty with delivery and installation, included in the price.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3270590226, total length: 770 mm, total width: 970 mm, total height: 2,100 mm, warranty duration: 12 months, input voltage: 400 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, Vacuum filler REX RVF 327 – manufactured in Austria. Hedpfxez D Uyne Anyeu The machine can be used for portioning, dosing and twisting. Completely factory refurbished and renovated by MM SERVICE 1 year warranty with delivery and installation, included in the price.

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Hodpfx Aev U Ag Dsnysu Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock.

Condition: good (used), Year of construction: 1987, functionality: fully functional, For sale: well-maintained REX ZA-800/S cutting machine, manufactured in 1987. The machine is fully functional and currently still in operation. It is in good condition and available immediately upon agreement. Hedpszux Hcjfx Anyju

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz Hsdpfxszrttfo Anyju • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D • Country of origin: Germany Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 0.51 kW (0.69 HP), overall weight: 45 kg, total width: 740 mm, total length: 500 mm, total height: 1,300 mm, type of input current: AC, input voltage: 230 V, volume flow: 14,000 m³/h, Rex Nordic Air Cooler REX 14000 REX14000 is our most compact, cost-effective, and energy-efficient air cooler. The cooler generates 14,000 m³/h of cooled and purified air to improve comfort for people, livestock, or premises in general. This means it cools an area of approximately 175 m². The REX14000 features an effective, integrated UVC light that kills potential germs and viruses. It has low power consumption (510W), filters and refreshes the air, and has louvers for effective distribution of the airflow, making it perfect for cooling large indoor spaces. This means powerful and environmentally friendly cooling for less than €2 per day. Easy to set up, operate, and maintain. Simply add water and enjoy cooling. The advantage of the cooler is that power is only consumed by the fan and a water pump. The actual cooling is achieved through natural evaporation. Technical specifications: Hodezc D Hxspfx Anysu Area coverage ≤ 120 m² Airflow 14,000 m³/h Water tank 60 l Speed (max.) 1,380 rpm (Variable) Voltage 230 V, 50 Hz Power consumption (max.) 510 W Weight 45 kg Dimensions (W x D x H) 74 × 50 × 130 cm The air cooler is a demonstration unit with minor signs of use. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is, of course, also possible. The item will be shipped by freight carrier - shipping costs within Germany are €99. If you have any questions, please do not hesitate to contact us.

Condition: good (used), table length 1,500 mm / width 760 mm, Motor 4.0kW (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Hsdpfoimz D Ujx Anyou Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested >>REX New price over 20,000 €

Year of construction: 2006, condition: ready for operation (used), TETRA PAK GABLE TOP FILLING MACHINE FOR 1000/500/300 ml WITH SCREW CAP APPLICATOR TETRA REX TR22 YOM 2006 ESL UNIT INCLUDED Hedpfxez E U Dvj Anyeu CAPACITY 2800 CARTONS PER HOUR 13.300 RUNNING HOURS EXCELLENT TECHNICAL CONDITION

Condition: excellent (used), Year of construction: 2016, operating hours: 879 h, functionality: fully functional, Rex vacuum Filler for sausage linking Model RVF 327S Year 2016 Operating hours 879 With 18 mm linking nozzle Hodpfxszu Ncbj Anyeu Holding device for casings Automatic Linking gearbox In excellent working condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, Stein Rex Mini crane, bricklaying crane, Senior STR 5-30/5, year of manufacture 2015, transport dimensions 2.35 x 2.35 x 2.35 m, height-adjustable base frame, boom load capacity 5 m / 300 kg, 4 m / 400 kg, weight 2440 kg, control system: radio + cable control (chain hoist / telescope / drive motor), 2 speeds, tower hydraulically extendable up to 5 m, 2 stone clamps, serial no. 40.15008, 400 volt version, drive motor has been refurbished. Hjdpfx Aoz Ehrmsnyju

Condition: ready for operation (used), functionality: fully functional, max working width 500mm max working height 200mm height of side heads 10cm changenable side heads 2-knives shafts Hodpfxozz Nh De Anysu roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed